: [Asterisk-Users] Pri Gateway Hardware
Does TDMoE supports kernel 2.6?
Where should I do echo cancellation?
--- Carlos Alperin [EMAIL PROTECTED] wrote:
Low level requeriment, just you transfer everything
using level 2. So you
don't need to the overhead to have Asterisk running
to route
Alexander Lopez a écrit :
Check out Redfone.
http://www.red-fone.com
It converts PRI or T1 to TDMoE (TDM over Ethernet)
Isn't TDMoE considered deprecated?
___
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
:19 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Pri Gateway Hardware
Alexander Lopez a écrit :
Check out Redfone.
http://www.red-fone.com
It converts PRI or T1 to TDMoE (TDM over Ethernet)
Isn't TDMoE considered deprecated
Alexander Lopez a écrit :
TDMoE is stable and stale, There is no more development planed or needed as it
only opens up a pipe between two ethernet points using Layer 2.
OK... What would be in the advantage in running TDMoE rather than using
IAX or SIP?
10, 2006 1:18 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Pri Gateway Hardware
Alexander Lopez a écrit :
TDMoE is stable and stale, There is no more development planed or needed as
it only opens up a pipe between two ethernet points using Layer 2
Jean-Michel Hiver wrote:
Alexander Lopez a écrit :
TDMoE is stable and stale, There is no more development planed or
needed as it only opens up a pipe between two ethernet points using
Layer 2.
OK... What would be in the advantage in running TDMoE rather than
using IAX or SIP?
TDMoE
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Jean-Michel
Hiver
Sent: Tuesday, January 10, 2006 1:18 PM
To: Asterisk Users Mailing List - Non-Commercial
Discussion
Subject: Re: [Asterisk-Users] Pri Gateway Hardware
Alexander Lopez a ?rit :
TDMoE
Does anyone have any experience using a PRI gateway, I am
looking for a way to have multiple asterisk boxes use one PRI, and send that
over the network. I herd there are copper gateway devices (like a X100P card,
only it registers with asterisk using sip, and it doesnt have to be
Link all of the asterisk boxes via
IAX?
PaulH
- Original Message -
From:
Johnathan
Falk
To: asterisk-users@lists.digium.com
Sent: Tuesday, January 10, 2006 8:20
AM
Subject: [Asterisk-Users] Pri Gateway
Hardware
Does anyone have any experience
to be able to communicate via SIP or IAX with the
first box.
Done.
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Johnathan Falk
Sent: Monday, January 09, 2006
4:20 PM
To:
asterisk-users@lists.digium.com
Subject: [Asterisk-Users] Pri
Gateway Hardware
Does anyone have any
SIP or IAX with the first box.
Done.
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf
Of Johnathan Falk
Sent: Monday, January 09, 2006 4:20 PM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] Pri Gateway Hardware
Does
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Imran Ahmed
Sent: Monday, January 09, 2006 5:23 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Pri Gateway Hardware
You donot need multiple asterisk boxes
Johnathan Falk wrote:
Does anyone have any
experience using a PRI gateway, I am
looking for a way to have multiple asterisk boxes use one PRI, and send
that
over the network. I herd there are copper gateway devices (like a X100P
card,
only it registers with asterisk using sip,
: [Asterisk-Users] Pri
Gateway Hardware
Does anyone have any experience
using a PRI gateway, I am looking for a way to have multiple asterisk boxes
use one PRI, and send that over the network. I herd there are copper gateway
devices (like a X100P card, only it registers with asterisk using
Discussion
Subject: RE: [Asterisk-Users] Pri
Gateway Hardware
Check out Redfone.
http://www.red-fone.com
It converts PRI or T1 to
TDMoE (TDM over Ethernet)
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Johnathan Falk
Sent: Monday
15 matches
Mail list logo