Dear Mojo;
That is primary fine, but there are two issues looking
for help about them:
1) Based on your below example (dialing *4*18005551212
to select channel 4), the question is how to give
second dial tone just after dialing the *4*
(indicating the channel was captured)?
2) How to let this
Dear Walt;
Maybe I did not understand any thing from below :) -
Are you talking about configuration to be done on the
Telephone device is self or on the AVAYA server it
self? If it is on the telephone device, so how you
will give a second dial tone and you do not know if
there is available
The problem here, if it's a problem, is that it IS a POTS dialtone and
not asterisk's. So you can dial only what the telco lets you dial.
Al lists wrote:
Here is how i overcome this problem,
ignorpat = 9
exten = 9*,1,Dial(ZAP/1/w)
press 9* from your handset and after 1 second you have
I need to select a line from the Zap group channel
using the SIP Phone (not FXO and not FXS ports).
ignorepat does not work?
Also, what is the method to let the second dial tone
has another tone frequency?
Regards
Bilal
No, ignorepat is for FXS ports (FXS ports use FXO
I can't help you with that. I only wanted to point out that ignoreopat
is not what you need.
On Polycom SIP phones you continue dialtone by placing a , in the
phone's dialplan. SIP phones have their own internal dialplan that is
not part of Asterisk's dialplan. You would have to check the
For another tone frequency for the outside dialtone, try putting this
value [EMAIL PROTECTED],[EMAIL PROTECTED],[EMAIL
PROTECTED];*(.4/0/1),10(*/0/2+3) in the Outside
Dialtone field. It will give you a slight pause followed by a different
dialtone frequency. On a Linksys/Siprua 941, that would
It would be ugly, but you could prefix a zap channel or group number
before the phone number to dial. Using groups for an example:
exten = _*X*X.,1,Dial(ZAP/g${EXTEN:1:1}/${EXTEN:3})
exten = _*XX*X.,1,Dial(ZAP/g${EXTEN:1:2}/${EXTEN:4})
so dialing *4*18005551212 dials out over zap group 4...
Here is how i overcome this problem,
ignorpat = 9
exten = 9*,1,Dial(ZAP/1/w)
press 9* from your handset and after 1 second you have POTS line dial tone
on your phone,
On 10/3/07, Mojo with Horan Company, LLC [EMAIL PROTECTED] wrote:
It would be ugly, but you could prefix a zap channel or