On Mon, 2005-01-03 at 20:34 +0200, [EMAIL PROTECTED] wrote:
> Hi,
>
> Has anyone had success using a TE410P card in an HP-Compaq DL380 G4
> server?
>
> For me the card is detected fine, but the system just never sees an
> interrupt from the card. I've tried everything I can think of. The card
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of
> [EMAIL PROTECTED]
> Sent: Monday, January 03, 2005 1:35 PM
> To: asterisk-users@lists.digium.com
> Subject: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
>
>
> Hi,
>
> Has anyone had succ
On Mon, 3 Jan 2005, Steven Critchfield wrote:
>
> Might want to check the archives, but I seem to remember a comment once
> before about having to go into the BIOS and provision an IRQ for the
> card before it will be seen properly.
>
Hi Steven,
Thanks for the suggestion - there is a (uniqu
I have 3 DL380 G4's in production, only difference that I can tell is that I
am running a 2.4.22 kernel.
Chris
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Monday, January 03, 2005 11:35 AM
To: asterisk-users@lists.digium.com
Su
Hi Steve-
My customer has five DL320's and ten DL360's - all running asterisk with
TE410P's with no problems - no 380's though. I'm using Fedora core 1
and 2.4.xxx kernel..
I'm assuming that you've done the correct initialization for the card:
modprobe and ztcfg etc? Sounds like a 2.6 kernel
On Mon, 3 Jan 2005, Chris Modesitt wrote:
> I have 3 DL380 G4's in production, only difference that I can tell is that I
> am running a 2.4.22 kernel.
Great info - thanks. I'll try a 2.4.22 kernel in the morning.
Steve
___
Asterisk-Users mailing li
On Mon, 3 Jan 2005, Scott Stingel wrote:
> Hi Steve-
>
> My customer has five DL320's and ten DL360's - all running asterisk with
> TE410P's with no problems - no 380's though. I'm using Fedora core 1
> and 2.4.xxx kernel..
>
> I'm assuming that you've done the correct initialization for th
, January 03, 2005 2:04 PM
To: [EMAIL PROTECTED]; Asterisk Users Mailing List - Non-Commercial
Discussion
Subject: Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4
server
On Mon, 3 Jan 2005, Scott Stingel wrote:
> Hi Steve-
>
> My customer has five DL320's and ten DL360
On Mon, 3 Jan 2005 [EMAIL PROTECTED] wrote:
> HP servers are generally very solid machines. Are you running SMP?
> That could make a difference in IRQ behavior.
I'm no Fedora Core expert,, but I tried both Fedora Core's
single and smp kernels (they put the choice in Grub). Also built
vanil
nal Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Tuesday, 4 January 2005 6:22 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
On Mon, 3 Jan 2005 [EMAIL PROTEC
he above configurations...
>
> Anyone got any other ideas?
>
> Thanks
>
> Josh
>
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of
> [EMAIL PROTECTED]
> Sent: Tuesday, 4 January 2005 6:22 AM
> To: Asterisk Users M
I really am at my wits end about this one. Some people report this
card and server working fine while others (like myself) can't get it
going no matter what. I have been told by the Digium distributor in
our country that this card simply "not compatible with some
motherboards". Sounds very weak for
On Tue, Jan 04, 2005 at 10:13:27PM +1100, Eric Bishop wrote:
> I really am at my wits end about this one. Some people report this
> card and server working fine while others (like myself) can't get it
> going no matter what. I have been told by the Digium distributor in
> our country that this car
> > I really am at my wits end about this one. Some people report this
> > card and server working fine while others (like myself) can't get it
> > going no matter what. I have been told by the Digium distributor in
> > our country that this card simply "not compatible with some
> > motherboards".
I gave up on an HP 1U server (hmm, I think it was a DL 140)
It seemed like the E100 I tried to put in didn't play nice with the
server monitoring ASIC on the MB. I tried several distros and
kernels, and even installed HP's driver set for one (Suse I think).
Same card and config worked fine in a pla
On Mon, 3 Jan 2005 [EMAIL PROTECTED] wrote:
> Has anyone had success using a TE410P card in an HP-Compaq DL380 G4
> server?
Thanks for all the postings on this thread.
I have a new and completely untested theory - the G4 has the option of a
non-hotplug or a hotplug PCI riser cage. My new the
I will certainly try that. Please also let me know your progress..
On Tue, 4 Jan 2005 22:12:23 +0200 (SAST), [EMAIL PROTECTED]
<[EMAIL PROTECTED]> wrote:
>
>
> On Mon, 3 Jan 2005 [EMAIL PROTECTED] wrote:
>
> > Has anyone had success using a TE410P card in an HP-Compaq DL380 G4
> > server?
On Monday 03 January 2005 19:34, [EMAIL PROTECTED] wrote:
> Has anyone had success using a TE410P card in an HP-Compaq DL380 G4
> server?
We're struggeling with the same thing right now. We have several TE410Ps
working on DL380G3s, but have so far been unsuccessful in getting it to work
on the G
On Wed, 5 Jan 2005, Eric Bishop wrote:
> I will certainly try that. Please also let me know your progress..
Didn't help for me.
I also tried removing one processor with no benefit.
So I've now given up.
Steve
___
Asterisk-Users mailing list
A
On Tue, 2005-01-04 at 17:05 +1100, Eric Bishop wrote:
> And I thought it was just me going crazy. I have the exact same issue
> on a HP-Compaq DL360 G4 server (1U rackmount version). I have tried
> everything that has been mentioned here and more. Even replaced the
> TE410P card (so know it's not
Well it's clear now that this is not an isolated issue. Has anyone
been in touch with Digium about this issue? I have logged a support
issue with them, but thus far have not received a response. Anyone
had better luck with Digium support and the Compaq/HP G4 server
series?
On Wed, 5 Jan 2005 18:
Eric Bishop wrote:
Well it's clear now that this is not an isolated issue. Has anyone
been in touch with Digium about this issue? I have logged a support
issue with them, but thus far have not received a response. Anyone
had better luck with Digium support and the Compaq/HP G4 server
series?
On We
On Wednesday 05 January 2005 21:43, Steven Critchfield wrote:
> While browsing the Wiki, I found this bit of information. Maybe it will
> help you out some.
> http://www.voip-info.org/wiki-Asterisk+TE410p+No+Interrupts
Sadly it didn't do anything for me. Is there anyway to get any kind of status
On Thu, 2005-01-06 at 12:36 +0100, Tais M. Hansen wrote:
> On Wednesday 05 January 2005 21:43, Steven Critchfield wrote:
> > While browsing the Wiki, I found this bit of information. Maybe it will
> > help you out some.
> > http://www.voip-info.org/wiki-Asterisk+TE410p+No+Interrupts
>
> Sadly it d
On Thu, 6 Jan 2005, pbx wrote:
> I just installed few TE410P in ml330/350 G3 dual Xeon 3.6ghz without
> any problem (kernel 2.6.8)
> Coulds you describe the problem more specificaly.
> Jack
Suggest you review the thread where you will find several explanations of
the problem. It's on G4 s
On Thu, 6 Jan 2005, Steven Critchfield wrote:
> I don't remember for sure if you had tried it with IOAPIC turned off. I
> did look back and see that you only have 9 IRQs actually in use so the
> normal PIC should be fine. I would try that after a full power down and
> power disconnect. The power
The problem definately seems to be G4 server related, most folks with
G3's seem to be unaffected. Anyone know where there might be a
changelog of G3->G4? That might reveal some pertinent information.
On Thu, 6 Jan 2005 16:53:09 +0200 (SAST), [EMAIL PROTECTED]
<[EMAIL PROTECTED]> wrote:
>
>
> On
On Fri, 7 Jan 2005, Eric Bishop wrote:
> The problem definately seems to be G4 server related, most folks with
> G3's seem to be unaffected. Anyone know where there might be a
> changelog of G3->G4? That might reveal some pertinent information.
2nd hand info from HP seemed to be that the main
I have been having this exact problem with a Tatung dual EMT-64 server as
well.
I have been trying to get a TE410P running and all looks great, driver
loads, runs ztcfg OK, etc. but no interrupts are ever processed.
One additional piece of info that I have not seen in this thread is that I
am abl
-Commercial Discussion
Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4
server
I have been having this exact problem with a Tatung dual EMT-64 server
as
well.
I have been trying to get a TE410P running and all looks great, driver
loads, runs ztcfg OK, etc. but no interrupts are ever
D]
[mailto:[EMAIL PROTECTED] On Behalf Of Alexander
Lopez
Sent: Monday, 10 January 2005 4:22 PM
To: [EMAIL PROTECTED]; Asterisk Users Mailing List - Non-Commercial
Discussion
Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
Make sure you has a span defined for each port on
yone else has.
Josh
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Alexander
Lopez
Sent: Monday, 10 January 2005 4:22 PM
To: [EMAIL PROTECTED]; Asterisk Users Mailing List - Non-Commercial
Discussion
Subject: RE: [Asterisk-Users] TE410P card in an HP-Co
MAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Steve
Hanselman
Sent: Friday, 14 January 2005 7:24 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
Has anyone also logged a support call with D
On Fri, 2005-01-14 at 09:23 +, Steve Hanselman wrote:
> Has anyone also logged a support call with Digium, it has to be either the
> card, Linux or the Zaptel drivers.
You missed the obvious "or the HP Compaq DL380 G4 server"
Regards,
Adam
___
5 09:51
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
On Fri, 2005-01-14 at 09:23 +, Steve Hanselman wrote:
> Has anyone also logged a support call with Digium, it has to be either the
> card, Linux or th
Steve Hanselman wrote:
I'm assuming that other non Digium cards work in it, but yes, you're right.
Has anybody run any other PCI cards in those slots under Linux and seen
interrupts from those cards?
You'd be hard pressed to find a standard card requiring accurate
interrupts 1000 times per second.
Any interrupts would be useful, that's the issue, the interrupt count is
zero.
-Original Message-
From: Matt Riddell [mailto:[EMAIL PROTECTED]
Sent: 14 January 2005 11:16
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] TE410P card in an HP-C
Hi Peter,
Basically they told me that they have several people complaining of
the problem with G4 series servers and they their hardware engineers
are going to order some of these servers and look into it. Currenly
the only "solution" they have is to use a different motherboard.
On Fri, 14 J
ssage-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Alexander
> Lopez
> Sent: Monday, 10 January 2005 4:22 PM
> To: [EMAIL PROTECTED]; Asterisk Users Mailing List - Non-Commercial
> Discussion
> Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq
It's most definately something to do with the G4 series both DL360 and
DL380. Most G3 series owners are reporting it working OK.
On Fri, 14 Jan 2005 20:50:40 +1100, Adam Goryachev
<[EMAIL PROTECTED]> wrote:
> On Fri, 2005-01-14 at 09:23 +, Steve Hanselman wrote:
> > Has anyone also logged a s
Eric Bishop wrote:
I logged a support issue with HP and their response was that it's not
their server that is the problem and if other cards show interrupts
(which they do) there's nothing more they can do
And you told them that this is the only server the cards don't work in?
--
Cheers,
Matt R
Yup, I found their support very unhelpful and unwilling to go the
extra (or even the first) mile..
On Sat, 15 Jan 2005 18:27:49 +1300, Matt Riddell
<[EMAIL PROTECTED]> wrote:
> Eric Bishop wrote:
> > I logged a support issue with HP and their response was that it's not
> > their server that i
> Yup, I found their support very unhelpful and unwilling to go the
> extra (or even the first) mile..
Might ACPI (not APIC) have anything to do with this condition? I once had
a hard time with a bunch of cards which were not taking interrupts. I
disabled ACPI interrupt routing (from
On Fri, 14 Jan 2005, Steve Hanselman wrote:
> Has anyone also logged a support call with Digium, it has to be either the
> card, Linux or the Zaptel drivers.
>
Yes of course - we have a call open.
Steve
___
Asterisk-Users mailing list
Asterisk-Use
On Sat, 15 Jan 2005, Begumisa Gerald M wrote:
> > Yup, I found their support very unhelpful and unwilling to go the
> > extra (or even the first) mile..
>
> Might ACPI (not APIC) have anything to do with this condition? I once had
> a hard time with a bunch of cards which were not
Can I ask what BIOS version you are running? Also what MPS Table Mode
are you using (in the BIOS Advanced Options). I have thus far been
getting no interrupts on either a G3 or G4 DL360.
On Mon, 3 Jan 2005 14:14:56 -0500, Karl H. Putz <[EMAIL PROTECTED]> wrote:
>
>
> > -Original Messa
Message-
> From: Eric Bishop [mailto:[EMAIL PROTECTED]
> Sent: Saturday, 15 January 2005 12:06 PM
> To: Peter Childs; Asterisk Users Mailing List - Non-Commercial
> Discussion
> Subject: Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4
> server
>
> Hi Peter,
&
Are these the G3 or G4 series?
On Mon, 03 Jan 2005 11:52:09 -0800, Scott Stingel <[EMAIL PROTECTED]> wrote:
> Hi Steve-
>
> My customer has five DL320's and ten DL360's - all running asterisk with
> TE410P's with no problems - no 380's though. I'm using Fedora core 1
> and 2.4.xxx kernel..
>
>
ds; Asterisk Users Mailing List - Non-Commercial
> > Discussion
> > Subject: Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4
> > server
> >
> > Hi Peter,
> >
> > Basically they told me that they have several people complaining of
> > t
On Wednesday 19 January 2005 23:15, Eric Bishop wrote:
> Well guys this is truly bizarre. I managed to get a DL360 G3 to show
> interrupts with FC2 but not FC3. Exact same config and setup
> proceedure. Ofcourse neither FC2 or FC3 show interrupts with the DL360
> G4. I think TE410P is just a fl
Has anyone had any luck with this issue and new Asterisk/Zaptel
releases (1.05/1.04)? I am still searching for a solution and waiting
for that Eureka! moment..
On Thu, 20 Jan 2005 09:20:09 +0100, Tais M. Hansen <[EMAIL PROTECTED]> wrote:
> On Wednesday 19 January 2005 23:15, Eric Bishop wrote
Did anyone get anywhere with this thread? Any HP G4 series servers working?
On Wed, 26 Jan 2005 09:46:31 +1100, Eric Bishop <[EMAIL PROTECTED]> wrote:
> Has anyone had any luck with this issue and new Asterisk/Zaptel
> releases (1.05/1.04)? I am still searching for a solution and waiting
> for th
Has anyone on this list have a way to contact ServerWorks? they make
the mobos for the G4.
I dont have a G4 but i do know HP in the G line uses ServerWorks
I have to make a full stop ordering on 2 G4 monsters because of this
thread...However one friend is using a sangoma card without
problems
To: Eric Bishop; Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4
server
Has anyone on this list have a way to contact ServerWorks? they make
the mobos for the G4.
I dont have a G4 but i do know HP in the G line uses
What is your dmesg output when you fire up the card.
There were some problems with TE410P and the intel chipset used in the
DL380 G4's.
You need firmware at least 'TE410P version c01a010b'
Contact Digium and RMA if you have older firmware (basically the symptom
will be everything
is ok, bu
55 matches
Mail list logo