> On Jan 3, 2019, at 4:01 PM, Robert Nelson wrote:
>
>> On Thu, Jan 3, 2019 at 3:58 PM wrote:
>>
>> I have the schematics and I followed them to come up with the clone.
>> Everything on the hardware side seems correct but for some reason I get
>> inverted red and blue.
>
> Which just leave
I managed to make QT appear in 6 seconds, cold boot on 800mhz AM3352.
Basically uboot 1 sec. kernel 2 sec. and init 2 sec and app.
need to strip some drivers, verification and use init
On Fri, Jan 4, 2019 at 4:14 AM Robert Nelson
wrote:
> On Thu, Jan 3, 2019 at 2:07 PM Talha Ayranci
> wrote:
correct UART rate and good ground connection?
On Thu, Jan 3, 2019 at 5:37 AM Sebastián Sáez wrote:
> Hi everyone!
>
> after install the last linux image in the emmc I can't use the UART0
> anymore (screenshot attached )
>
> All other function are working, I can do SSH using the softAP interface.
No, AM335x doesn't have an analog video input and hardware encoder by
itself. It can only handle network forwarding job.
also plz improve your title.
On Wed, Jan 2, 2019 at 8:45 PM ARASH FAHIM wrote:
> HI
> I am a computer student
> I want to change analog video (PAL/NTSC) to mpeg 2 realtime an
It anyone else stumbles on this the solution is:
sudo rmmod uvcvideo && sudo modprobe uvcvideo nodrop=1 timeout=5000
On Thursday, 18 February 2016 11:29:50 UTC+11, joelk wrote:
>
> Has anybody managed to capture video from a usb webcam on a BBB with any
> recent Linux distribution using OpenCV c
On Thu, Jan 3, 2019 at 3:58 PM wrote:
>
> I have the schematics and I followed them to come up with the clone.
> Everything on the hardware side seems correct but for some reason I get
> inverted red and blue.
Which just leaves your hdmi switch connection..
Regards,
--
Robert Nelson
https://
I have the schematics and I followed them to come up with the clone.
Everything on the hardware side seems correct but for some reason I get
inverted red and blue.
On Thursday, January 3, 2019 at 2:49:51 PM UTC-7, RobertCNelson wrote:
>
> On Thu, Jan 3, 2019 at 3:36 PM > wrote:
> >
> > Yes its
On Thu, Jan 3, 2019 at 3:36 PM wrote:
>
> Yes its not. On clone, the output from NXP TDA19988, is going to a HDMI
> switch rather than going to micro HDMI port, and the output from switch goes
> to HDMI connector.
> Do TDMA pins invert somewhere from micro HDMI port to HDMI cable with
> beagleb
Yes its not. On clone, the output from NXP TDA19988, is going to a HDMI
switch rather than going to micro HDMI port, and the output from switch
goes to HDMI connector.
Do TDMA pins invert somewhere from micro HDMI port to HDMI cable with
beaglebone?
On Thursday, January 3, 2019 at 2:20:00 PM
On Thu, Jan 3, 2019 at 3:14 PM wrote:
>
> Hi Robert,
>
> I tested debian-9.6 from the link you provided, and the colors on my clone
> board are still inverted.
> I tested the same image on beaglebone and the colors were correct.
>
> Please see my log below for the clone:
>
> U-Boot 2018.09-2-
Hi Robert,
I tested debian-9.6 from the link you provided, and the colors on my clone
board are still inverted.
I tested the same image on beaglebone and the colors were correct.
Please see my log below for the clone:
U-Boot 2018.09-2-gd5b4c4b656 (Oct 19 2018 - 14:16:02 -0500), Build:
jenk
On Thu, Jan 3, 2019 at 2:07 PM Talha Ayranci wrote:
>
> Hello everyone! Fİrst I am sorry for my bad English.
> I want to make a project with Beaglebone Black. My project is a GUI app with
> Real-Time Kernel based Linux. And i want to run this app in 5 sec. For
> example : https://www.youtube.com
Hello everyone! Fİrst I am sorry for my bad English.
I want to make a project with Beaglebone Black. My project is a GUI app
with Real-Time Kernel based Linux. And i want to run this app in 5 sec. For
example : https://www.youtube.com/watch?v=vm3Gp9KEs1w
- I flashed a Debian image ( 1GB conso
On Thu, Jan 3, 2019 at 1:56 PM wrote:
>
> Hi Robert,
>
> Here below is my boot log:
> """
> U-Boot 2018.09-2-gd5b4c4b656 (Oct 19 2018 - 14:16:02 -0500), Build:
> jenkins-
> github_Bootloader-Builder-84
>
> CPU : AM335X-GP rev 2.1
> I2C: ready
> DRAM: 512 MiB
> No match for driver 'omap_hs
Hi Robert,
Here below is my boot log:
"""
U-Boot 2018.09-2-gd5b4c4b656 (Oct 19 2018 - 14:16:02 -0500), Build:
jenkins-
github_Bootloader-Builder-84
CPU : AM3
Hi All,
I am not aware of what are the Touch Screen supported in Beagle bone black
so i need help to understand what are the supported Touch Screen Module
devices
for Beagle bone black.
I need to understand and integrate that Touch Screen Module device in
Beagle Bone Black.
Can someone please tel
Hi All,
I am not aware of what Camera device supported in Beagle bone black so i
need help to understand what are the supported Camera Module devices
for Beagle bone black.
I need to understand and integrate that Camera Module device in Beagle Bone
Black.
Can someone please tell me which will be
Hi All,
I am not aware of what AUDIO Codec device supported in Beagle bone black so
i need help to understand what are the supported devices
for Beagle bone black.
I need to understand and integrate that AUDIO Codec device in Beagle Bone
Black.
Can someone please tell me which will be the Support
18 matches
Mail list logo
