[beagleboard] Re: Android running on BBB with Linux 3.8

> > I'm also having problems starting adbd with kernel 3.8 and I think I found > the problem. I tried to load the kernel module using this command: insmod /system/lib/modules/3.8.13-bone28/kernel/drivers/usb/gadget/g_ffs.ko idVendor=0x18d1 idProduct=0x4e26 iSerialNumber=0123456789ABCDEF func

[beagleboard] Re: Android running on BBB with Linux 3.8

Andrew: Thank you for this post. I have this image working on my BBB using 4D Systems 4DCAPE-43T Cape by editing the uEnv.txt as: video=480x272-16@56 . I am able to SSH to the device using Android SSH Server on the device and putty on my PC. However, I need to know the root password for this

[beagleboard] Re: Android running on BBB with Linux 3.8

Hi, Could you share how? Thanks On Thursday, February 27, 2014 at 2:39:34 AM UTC+2, paccer wrote: > > Strangely, I've been unable to make touchscreen work with "andrews jb" on > 4D systems 4DCAPE_70T > I've tried with the prebuilt image, and also tried building from source, > using the instructi

[beagleboard] Re: Android running on BBB with Linux 3.8

Hello Rich, I am also trying to boot BBB with 4DCAPE-43T. 1. Can you please share your uEnv.txt? 2. Did you used a pre-built image from TI-Andriod or something different? 3. Did you boot off

[beagleboard] Re: Android running on BBB with Linux 3.8

Hi, I have Andrew Henderson's image running with LCD4 cape but now I am trying to communicate with the serial ports. I have tried modifying the init.rc to change the UART permissions as recommended in another post but that did not help. Also, I cannot access via abd. Any suggestions? Do I need

[beagleboard] Re: Android running on BBB with Linux 3.8

Strangely, I've been unable to make touchscreen work with "andrews jb" on 4D systems 4DCAPE_70T I've tried with the prebuilt image, and also tried building from source, using the instructions on Andrews webpage, using latest 3.8.x kernel sources. Touch screen works fine on TI_Android_JB_4.2.2_D

[beagleboard] Re: Android running on BBB with Linux 3.8

On Thursday, February 27, 2014 6:09:34 AM UTC+5:30, paccer wrote: > > Strangely, I've been unable to make touchscreen work with "andrews jb" on > 4D systems 4DCAPE_70T > I've tried with the prebuilt image, and also tried building from source, > using the instructions on Andrews webpage, using lat

[beagleboard] Re: Android running on BBB with Linux 3.8

I'm currently having a lot of problems here. If I use Andrew's pre-built image I get support of the LCD3 Rev. A2 with the BBB Rev. A6A but no support to miniUSB+ADB, the device is not even recognized as an actual device when I connect it (not even with a missing driver, it's just a ghost device

[beagleboard] Re: Android running on BBB with Linux 3.8

On Saturday, March 1, 2014 5:58:09 AM UTC+5:30, Daniel Delgado Terán wrote: > > I'm currently having a lot of problems here. If I use Andrew's pre-built > image I get support of the LCD3 Rev. A2 with the BBB Rev. A6A but no > support to miniUSB+ADB, the device is not even recognized as an actual

[beagleboard] Re: Android running on BBB with Linux 3.8

I've been looking into the issue some more (sorry for the delay), and I've still not been successful on getting the touch screen to work with 3.8. I am getting touch interrupts, but i don't appear to be able to calibrate myself out of the problem.. (?) After touching the screen the first time, e

[beagleboard] Re: Android running on BBB with Linux 3.8

Daniel I'm experiencing the same problem with the miniUSB and ADB - works on TI prebuilt; doesn't work on Andrew's 3.8 image. Have you had any luck figuring out a solution. I've Googled a lot and haven't seen anyone else report the issue. - Andy On Friday, February 28, 2014 7:28:09 PM UTC-5,

[beagleboard] Re: Android running on BBB with Linux 3.8

I have installed Andrew's Android build on a BBB with a 4D 4.3 display. Most of it is working well. Has anyone succeeded getting keys mapped to Home, Menu, Back and Search? Thanks Mahen -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are s

[beagleboard] Re: Android running on BBB with Linux 3.8

Since I answered this over on the 4DSystems forums, I figured that I should link it here for everyone's reference: http://forum.4dsystems.com.au/forum/forum-aa/4d-systems-hardware/beaglebone-display-modules-and-capes/40743-screen-resolution-and-key-mapping-4dcape-43-beaglebone-black-android-kerne

[beagleboard] Re: Android running on BBB with Linux 3.8

Andrew, Thank you. I finally got both key mapping and navigation bar issue resolve. Cheers Mahendra On Monday, September 15, 2014 10:43:59 AM UTC-4, Andrew Henderson wrote: > > Since I answered this over on the 4DSystems forums, I figured that I > should link it here for everyone's reference:

[beagleboard] Re: Android running on BBB with Linux 3.8

I've downloaded the image and using DD I have applied in my microSD. After DD finished, my microSD mounted 3 partitions. I've put it my BeagleBone Black but the android did not start (even with the boot button pressed). I don't know what was wrong. Em segunda-feira, 17 de junho de 2013 21:0

[beagleboard] Re: Android running on BBB with Linux 3.8

Hi Daniel, Did you ever resolve this issue? I am using the latest BBBAndroid image and my BBB is not being recognized via ADB miniusb. If I use an older image with Kernel 3.2 support I can adb shell into the BBB successfully. Thanks! On Friday, February 28, 2014 at 7:28:09 PM UTC-5, Daniel D

[beagleboard] Re: Android running on BBB with Linux 3.8

Thanks a lot for this great job ! I was able to flash the compiled image on SD card and to boot my BBB on android without too much trouble (I only faced display resolution issue with my DVI display). But now I'm fighting to replicate the same from the compilation stage. I followed step by step

[beagleboard] Re: Android running on BBB with Linux 3.8

It appears that one of your partitions is not properly mounting, hence the failure of all of the daemons to start. The launch scripts are trying to start everything, but since the files aren't there, nothing is going to be able to start. Are you using a microSD card bigger than 4GB? This migh

[beagleboard] Re: Android running on BBB with Linux 3.8

I'm using a 4GB SD card. I tried to delete the 4th partition with no success. Then I did again the full procedure from the beginning (a second time) and surprisingly now it works ! I probably missed (the first 2 times) one step in the procedure ... Thanks a lot for your support. Le mercredi 2

[beagleboard] Re: Android running on BBB with Linux 3.8

I followed the steps recommended in the link http://icculus.org/~hendersa/android/ .The BBB is booting through HDMI properly. My requirement is to boot on a new LCD SH480272T-006-I13Q with the datasheet link as http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0CCMQFjAA&url=h

[beagleboard] Re: Android running on BBB with Linux 3.8

Hello Polash. I received your mail to me this morning on this topic. Keep in mind that I have about four to five people mailing me data sheets EVERY MORNING asking me how to get this or that working with the BBB, so I'm going to give you the quick overview and post it here so perhaps others ca

[beagleboard] Re: Android running on BBB with Linux 3.8

> > Hi Andrew, > Its great work!! . I have an issue with the pre-built images with the custom board(duplication of BBB), while booting the system hangs at andriod boot image, i have the logcat "http://pastebin.com/ZVhQW3CC"; . I cannot find which one is causing the device to

Re: [beagleboard] Re: Android running on BBB with Linux 3.8

On Wed, Oct 2, 2013 at 5:24 AM, wrote: >> I'm also having problems starting adbd with kernel 3.8 and I think I found >> the problem. I tried to load the kernel module using this command: > > insmod /system/lib/modules/3.8.13-bone28/kernel/drivers/usb/gadget/g_ffs.ko > idVendor=0x18d1 idProduct=0

Re: [beagleboard] Re: Android running on BBB with Linux 3.8

I've now built the kernel with g_ffs built directly into the kernel and now adb works! Am Mittwoch, 2. Oktober 2013 05:44:38 UTC+2 schrieb Nikolay Elenkov: > > On Wed, Oct 2, 2013 at 5:24 AM, > > wrote: > >> I'm also having problems starting adbd with kernel 3.8 and I think I > found > >> th

Re: [beagleboard] Re: Android running on BBB with Linux 3.8

hello! please tell me the steps to make ADB work. as i have set CONFIG_USB_FUNCTIONFS=y but when i write ./adb devices my device not appear in the list however i check the usb debugging in my BBB. Best Regards, Sultan On Monday, October 7, 2013 10:05:10 AM UTC+2, david.m...@gmail.com wrote: > >

Re: [beagleboard] Re: Android running on BBB with Linux 3.8

Rich I got Andrew Henderson JB image working, Thanks On Thu, Jan 30, 2014 at 11:54 AM, Mahendra Gunawardena < mahengunaward...@gmail.com> wrote: > Hello Rich, > > I am also trying to boot BBB with 4DCAPE-43T. > > >1. Can you please share your uEnv.txt? >2. Did you used a pre-built ima

Re: [beagleboard] Re: Android running on BBB with Linux 3.8

On Sunday, July 7, 2013 4:09:26 AM UTC+2, Andrew Henderson wrote: > > [...] > Try testing it out with a USB mouse and making sure that it looks and acts > like what you would expect. If you move the mouse and don't see the > cursor, then let us know. [...] > > Andrew > Hi Andrew, I run

Re: [beagleboard] Re: Android running on BBB with Linux 3.8

I have just tested with hdmi connection (so no LCD7) and it's the same - no mouse. On Monday, February 3, 2014 10:45:31 AM UTC+1, pru@gmail.com wrote: > > > > On Sunday, July 7, 2013 4:09:26 AM UTC+2, Andrew Henderson wrote: >> >> [...] >> > Try testing it out with a USB mouse and making sur

Re: [beagleboard] Re: Android running on BBB with Linux 3.8

Any chances you can please share that image? On Monday, October 7, 2013 3:05:10 AM UTC-5, david.m...@gmail.com wrote: > > I've now built the kernel with g_ffs built directly into the kernel and > now adb works! > > Am Mittwoch, 2. Oktober 2013 05:44:38 UTC+2 schrieb Nikolay Elenkov: >> >> On Wed,

Re: [beagleboard] Re: Android running on BBB with Linux 3.8

BBB does not ship with HW support for OTG. Gerald On Fri, Feb 28, 2014 at 6:28 PM, Daniel Delgado Terán wrote: > I'm currently having a lot of problems here. If I use Andrew's pre-built > image I get support of the LCD3 Rev. A2 with the BBB Rev. A6A but no > support to miniUSB+ADB, the device

Re: [beagleboard] Re: Android running on BBB with Linux 3.8

Have you tried Adb via TCP/IP ? That worked for me with Andrew Henderson's pre-built image. -Suzanne Sent from my iPhone > On Feb 28, 2014, at 7:28 PM, Daniel Delgado Terán wrote: > > I'm currently having a lot of problems here. If I use Andrew's pre-built > image I get support of the LCD3 R

Re: [beagleboard] Re: Android running on BBB with Linux 3.8

Hi, Check out this thread: http://beagleboard.org/Community/Forums/?place=msg%2Fbeagleboard%2FnwS91gX6dtk%2FKzn5LeytsCUJ I had the same issue with the 4DCAPE-70T. I replaced the delay to 15 ms and the issue went away but it still feels like a hack. On Sun, Mar 16, 2014 at 4:11 PM, paccer wro

Re: [beagleboard] Re: Android running on BBB with Linux 3.8

Hi, I followed the procedure described in this blog post but still cannot succeed to see my board over ADB. I recompiled the kernel after enabling the FunctionFS, updated the "uEnv.txt" and "init.am335xevm.usb.rc" files. Then when booting up my board I can see the mounted FunctionFS: ~$ lsusb

Re: [beagleboard] Re: Android running on BBB with Linux 3.8

On Tue, Apr 29, 2014 at 12:45 AM, jeremy geslin wrote: > > But still cannot see the device in ADB: > ~$ adb devices > * daemon not running. starting it now on port 5037 * > * daemon started successfully * > List of devices attached > > Does anyone succeed to have ADB working using the FunctionFS