Hi all,
In Proctorlabs there is always mentioned that the QOS SRND provides a adequate
example for class-based shaping but i can't find them.
Also i heard rumors that the QOS SRND document provided at the labs is not at
Cisco Website available anymore. However i can find a version here:
htt
Hello there
Check this path in the SRND
WAN Aggregator QoS Design - WAN Edge Link-Specific QoS Design - Frame Relay
- Slow-Speed (£ 768 kbps) Frame Relay Links, then turn the page and you will
find it.
HTH
On Wed, Aug 4, 2010 at 5:12 AM, Stutz, Bernhard wrote:
> Hi all,
>
> In Proctorlabs th
Sent: Tuesday, August 03, 2010 2:33 PM
To: Stutz, Bernhard
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] class-based shaping
Hello there
Check this path in the SRND
WAN Aggregator QoS Design - WAN Edge Link-Specific QoS Design - Frame Relay
- Slow-Speed (£ 768 kbps) Frame
I believe the qos srnd is provided on the computer's desktop in off format
when you take the lab exam. No need to find it through the web interface.
- Reply message -
From: "CCIE Voice GMAIL"
Date: Tue, Aug 3, 2010 6:02 pm
Subject: [OSL | CCIE_Voice] class-based sh
Thanks.
From: bkvalent...@gmail.com [mailto:bkvalent...@gmail.com]
Sent: Tuesday, August 03, 2010 3:19 PM
To: CCIE Voice GMAIL; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] class-based shaping
I believe the qos srnd is provided on the computer's desktop in off f
Can anyone check out my configuration of class based shaping and class based
cRTP. Seems that I can't get the compression to increment when I configure
class based shaping. When I use MLPPP and cRTP, it increments.
Thanks for your assistance.
class-map match-any signal
match ip dscp af31
matc
Apparently the above config does not work.
That is to say MLP and class based shaping are not compatible
Config could look something like one of the following.
policy-map NO-GOOD
class data
shape blah blah
virtual-template x
service-policy out NO-GOOD
or like this
policy-map NO-GOOD
class dat
Hello, there are 2 old posts on that topic - I did follow them, however.
With bellow config on my 2 rtrs the CRTP 'show policy-map int' counter still
shows ZERO. I reloaded, reapplied. Pls have a look and advice for the
direction... thanks! There is match on the voice class. IOS is 12.4(20)T.
Than
Well it looks like it is picking up the RTP header compression, shaping and
even the service policy but not doing it.
Have you tried rebooting the router or copy, delete then reapply ?
Sent from my iPad
On Mar 3, 2013, at 8:43 PM, Jason Lee wrote:
> All,
>
> Was wondering if I could get a s
I reloaded the router and reapplied the QoS configuration. No dice. Still
not matching in the nested policy. Very weird that it is working like a
champ in the SB router. I've done this a couple times in the past and
never run into this issue. I'm going to play with it a little longer, but
may
Try modifying your config to this:
class-map match-any signal
match ip dscp cs3
match protocol sip
match protocol h323
match protocol mgcp
match protocol skinny
class-map match-any voice
match ip dscp ef
match protocol rtp
match protocol rtcp
On Sun, Mar 3, 2013 at 7:29 PM, Jason Lee w
ttp://www.netelligent.com/>
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Mark Nigh
Sent: Saturday, February 27, 2010 1:31 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] class based shaping and cRTP
Can anyone check
27, 2010 1:31 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] class based shaping and cRTP
Can anyone check out my configuration of class based shaping and class based
cRTP. Seems that I can't get the compression to increment when I configure
class based shaping. When I u
*Sent:* Saturday, February 27, 2010 1:31 PM
> *To:* ccie_voice@onlinestudylist.com
> *Subject:* [OSL | CCIE_Voice] class based shaping and cRTP
>
>
>
> Can anyone check out my configuration of class based shaping and class
> based cRTP. Seems that I can’t get the compression to incre
14 matches
Mail list logo