Joerg Schilling wrote on 01/13/06 04:24:
> Joachim Feise <[EMAIL PROTECTED]> wrote:
>
>> Does that mean that you have started the new development cycle for cdrtools?
>> I have an mkisofs patch that I would like to see included in mkisofs:
>> http://www.feise
Does that mean that you have started the new development cycle for cdrtools?
I have an mkisofs patch that I would like to see included in mkisofs:
http://www.feise.com/~jfeise/Downloads/mkisofs/
-Joe
Joerg Schilling wrote on 01/12/06 02:42:
> All:
...
--
To UNSUBSCRIBE, email to [EMAIL PROTE
---
/usr/bin/cdrecord -v gracetime=2 dev=/dev/hdc speed=40 -dao
driveropts=burnfree -eject -useinfo -pad -shorttrack -audio
/tmp/kde-joachim/k3b_audio_0_01.inf /tmp/kde-joachim/k3b_audio_0_02.inf
/tmp/kde-joachim/k3b_audio_0_03.inf /tmp/kde-joachim/k3b_audio_0_04.inf
/tmp/kde-joachim/k3b_audio_0_0
Steven Friedrich wrote on 06/05/05 19:54:
> I don't know what you mean. Did you try to go to this web site? Was it
> there?
Gee, it isn't hard to put cdrecord into Google...
Sites move, and then you get a 404. That's the nature of the Web...
You don't even specify the version number.
I run cd
-if /dev/disk | gzip -9 > /tmp/pipe.dd.gz &
growisofs -M -J -R /dev/dvd /tmp/pipe.dd.gz
rm /tmp/pipe.dd.gz
any ideas ??
Joachim Braun
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Thank you for this.
I always booted from a DOS floppy to flash my BTC drive.
While that wasn't too bad, the DOS sw only supports IDE,
and I run my drive through an IDE-SCSI bridge on my
SCSI controller...
I'll try your program when I'm back from vacation...
Cheers,
-Joe
--
To UNSUBSCRIBE, email
).
With the cdrecord-ProDVD 2.01a27, the "Device type: Removable
CD-ROM" info is still the same, but burning works fine nevertheless!
By the way, Mr Schilling, thanks very much for this excellent software!
Best regards,
--
Joachim Werner
Wiesbaden
www.jo-werner.de
At 17.03.2004
).
With the cdrecord-ProDVD 2.01a27, the "Device type: Removable
CD-ROM" info is still the same, but burning works fine nevertheless!
By the way, Mr Schilling, thanks very much for this excellent software!
Best regards,
--
Joachim Werner
Wiesbaden
www.jo-werner.de
At 17.03.2004
Hello,
does this problem perhaps apply to the LiteOn 811S, too?
Best regards,
Joachim WERNER
Wiesbaden
Germany
Hello,
does this problem perhaps apply to the LiteOn 811S, too?
Best regards,
Joachim WERNER
Wiesbaden
Germany
Kernel 2.6.3
What I'm doing wrong?
Regards
Joachim Backes
--
Joachim Backes <[EMAIL PROTECTED]>
University of Kaiserslautern,Computer Center,
High Performance Computing Department,
D-67653 Kaiserslautern, PO Box 3049, Germany
--
Kernel 2.6.3
What I'm doing wrong?
Regards
Joachim Backes
--
Joachim Backes <[EMAIL PROTECTED]>
University of Kaiserslautern,Computer Center,
High Performance Computing Department,
D-67653 Kaiserslautern, PO Box 3049, Germany
--
Just a followup to this issue:
This was in fact a bug in the kernel. The fix from the scsi-kernel
guys made it into 2.6.3-mm4 and 2.6.4-rc1.
-Joe
To put another data point in here, my BTC1004 (firmware V048)
works fine with cdrecord-prodvd...
So I would guess that your drive is broken.
-Joe
Just a followup to this issue:
This was in fact a bug in the kernel. The fix from the scsi-kernel
guys made it into 2.6.3-mm4 and 2.6.4-rc1.
-Joe
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
To put another data point in here, my BTC1004 (firmware V048)
works fine with cdrecord-prodvd...
So I would guess that your drive is broken.
-Joe
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
That seems to be the same problem I reported earlier:
growisofs hanging when running kernel 2.6.3.
I just tried commenting out that particular line, and I can
use growisofs just fine.
-Joe
That seems to be the same problem I reported earlier:
growisofs hanging when running kernel 2.6.3.
I just tried commenting out that particular line, and I can
use growisofs just fine.
-Joe
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PRO
Hi,
I am using Linux kernel 2.6.3 and was running into some serious
problem with growisofs (may also happen with cdrecord-prodvd,
but I haven't tested that):
My DVD-drive (BTC1004) is connected via an IDE-to-SCSI bridge
to an Adaptec 29160.
Whenever I try to access the drive with growisofs, the wh
Hi,
I am using Linux kernel 2.6.3 and was running into some serious
problem with growisofs (may also happen with cdrecord-prodvd,
but I haven't tested that):
My DVD-drive (BTC1004) is connected via an IDE-to-SCSI bridge
to an Adaptec 29160.
Whenever I try to access the drive with growisofs, the wh
> I'm trying to figure out where to locate the firmware info. I've
> checked /var/log/messages, dmesg output and /proc, but no luck. Suggestions?
[...]
> Using libscg version 'schily-0.7'
> scsibus0:
> 0,0,0 0) 'ATAPI ' 'CD-RW 52XMax ' '161D' Removable CD-ROM
> 0,1,0 1) 'GENERIC ' 'DVD DUAL 4XMax '
> I'm trying to figure out where to locate the firmware info. I've
> checked /var/log/messages, dmesg output and /proc, but no luck. Suggestions?
[...]
> Using libscg version 'schily-0.7'
> scsibus0:
> 0,0,0 0) 'ATAPI ' 'CD-RW 52XMax ' '161D' Removable CD-ROM
> 0,1,0 1) 'GENERIC ' 'DVD DUAL 4XMax '
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Some update: it turns out that I/O Magic recently changed drive
suppliers.
- From their forum I gathered that they used to use an Optorite
drive (firmware 2.xx).
The drive that I just got a week ago from TigerDirect is a
BTC drive, ID string DVDRW IDE
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Some update: it turns out that I/O Magic recently changed drive
suppliers.
- From their forum I gathered that they used to use an Optorite
drive (firmware 2.xx).
The drive that I just got a week ago from TigerDirect is a
BTC drive, ID string DVDRW IDE
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Andy Polyakov wrote:
>>4693721088/4700372992 (99.9%) @2.0x, remaining 0:02
>
> ^ With DVD+RW? Can you really
> confirm that your unit burns DVD+RW at 2x? Verify with
> dvd+rw-mediainfo...
INQUIRY:[D
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Andy Polyakov wrote:
>>4693721088/4700372992 (99.9%) @2.0x, remaining 0:02
>
> ^ With DVD+RW? Can you really
> confirm that your unit burns DVD+RW at 2x? Verify with
> dvd+rw-mediainfo...
INQUIRY:[D
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
If it helps, I recently bought this model and I can confirm that
cdrecord+prodvd works with this drive.
- -Joe
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.2.2 (MingW32)
iD8DBQE/1MfiKc8oZ1MoTeoRAgLxAJ9LLKkEezDJkyOJ7qLA3tHC9933RwCfX3NR
zEF9aPVW6r7
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
when using growisofs -Z /dev/srX=/dev/zero to blank a DVD+RW I get
this error:
> growisofs -Z /dev/sr6=/dev/zero
WARNING: /dev/sr6 already carries isofs!
About to execute 'builtin_dd if=/dev/zero of=/dev/sr6 obs=32k seek=0'
/dev/sr6: "Current Wri
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
If it helps, I recently bought this model and I can confirm that
cdrecord+prodvd works with this drive.
- -Joe
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.2.2 (MingW32)
iD8DBQE/1MfiKc8oZ1MoTeoRAgLxAJ9LLKkEezDJkyOJ7qLA3tHC9933RwCfX3NR
zEF9aPVW6r7
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
when using growisofs -Z /dev/srX=/dev/zero to blank a DVD+RW I get
this error:
> growisofs -Z /dev/sr6=/dev/zero
WARNING: /dev/sr6 already carries isofs!
About to execute 'builtin_dd if=/dev/zero of=/dev/sr6 obs=32k seek=0'
/dev/sr6: "Current Wri
sh,
why not mounting the iso image via loop device? Then you have access to
any file operations and commands you need. In script mode too, sure!
Joachim Backes
--
Joachim Backes <[EMAIL PROTECTED]>
University of Kaiserslautern,Computer Center,
High Performance Computing Department,
D-67653 Kais
sh,
why not mounting the iso image via loop device? Then you have access to
any file operations and commands you need. In script mode too, sure!
Joachim Backes
--
Joachim Backes <[EMAIL PROTECTED]>
University of Kaiserslautern,Computer Center,
High Performance Computing Department,
D-67653 Kais
Hi,
I have 2 questions:
1. when burning iso images to CD's, do I need fixate the CD
or not (-fix or -nofix)?
2. Does the fixating need some space on the target, and if yes, how much?
Regards
Joachim Backes
--
Joachim Backes <[EMAIL PROTECTED]>
University of Kaiserslautern,Comp
Hi,
I have 2 questions:
1. when burning iso images to CD's, do I need fixate the CD
or not (-fix or -nofix)?
2. Does the fixating need some space on the target, and if yes, how much?
Regards
Joachim Backes
--
Joachim Backes <[EMAIL PROTECTED]>
University of Kaiserslautern,Comp
: using
man -t cdrecord
produces a correct PS file containg the w h o l e man page, but
man cdrecord
inside of a xterm or gnome-terminal or (KDE) konsole stops on the "ยต" char.
Joachim Backes
--
Joachim Backes <[EMAIL PROTECTED]> | Univ. of Kaiser
Hi,
having some very old re-writable CDs from BASF which can be
burned by 2speed.
My writer is a IDE plexwriter 24/10/40a (driven by SCSI emulation),
my cdrecord version is 1.11a30, LINUX kernel 2.4.19.
Problem: when I try to burn an image, cdrecord complains about a too low speed
(see below; r
split / +/,`readcd dev=... f=/dev/null sectors=0-0
2>/dev/null`)[1];
And a shell script will be more complicated to get the appropriate info.
or
c) An option (-sb) for example which tells readcd that the source
is a burned cd.
Opinions on this issue?
Regards
Joachi
d is a lot faster then
the usage of readcd.
Regards
Joachim Backes
--
Joachim Backes <[EMAIL PROTECTED]> | Univ. of Kaiserslautern
Computer Center, Supercomputing Division | Phone: +49-631-205-2438
D-67653 Kaiserslautern, PO Box 3049, Germany | Fax:
shell pipe:
dd if= bs=1m | cdrecord ...
Regards
Joachim Backes
--
Joachim Backes <[EMAIL PROTECTED]> | Univ. of Kaiserslautern
Computer Center, Supercomputing Division | Phone: +49-631-205-2438
D-67653 Kaiserslautern, PO Box 3049, Ger
On 08-Aug-2000 [EMAIL PROTECTED] wrote:
> Just try
> mkisofs -o /tmp/ -graft-points /opt/schily/\=/opt/schily
>
>
Hi,
that would not be what I want, because no correct re-pathing
would be done (after mounting the cdrom, I need the complete
of opt/schily starting at the cdrom mo
ount-point, then
"ls -lR /some-mount-point" only shows an empty filesystem.
All OK, if I use:
mkisofs -graft-points -o /tmp/x /opt/schily=/opt/schily
(no double slash!).
I had not this problem when using cdrtool-1.8.
Regards
Joachim Backes
--
Joachim Backes <[EMAIL P
am not sure whether I understood the usage of escaping the = character
correctly, but I am sure that mkisofs gets the string "a\=b" as the second
filename.
How to escape correctly? (I use RedHat 6.1 as OS).
Regards
Joachim Backes
--
Joachim Backes <[EMAIL PROTECTED]>
42 matches
Mail list logo
