ted,
thanks for all your hard work. i appreciate it. i know it was a
complicated config, and you tackled it nicely.
in fact, i found out today that what i wanted to do was kind of
impossible, and that was to separate IP traffic from both IPX *and*
EIGRP traffic (both of which cannot flow direct
All,
I've been waiting to write this for a long time now.
I finally made it, got back from Brussels last night, dialled up this
morning and there it was #10808. WOW
My sincere thanks go to all who have helped me along the way.
I must however mention the likes of Marc Russell, Chuck (The long & Win
Congratulations!
I hope I can follow your example and clear the lab...someday! :) Enjoy the
new prestigious certification...and more importantly, a state of mind!
Cheers,
Kenan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=58746&t=58745
---
Hello !
Im am going to take this test too !
Do know if there is some simulator for this test in internet ??
How about the score, is high ???
I will really appreciate for knowlodge that can help me in this matter !!
Tks !!
Silvio/Brazil
Message Posted at:
http://www.groupstudy.com/form/read.php?
Congratulations!
Siddiqi Kenan wrote:
> Congratulations!
> I hope I can follow your example and clear the lab...someday! :) Enjoy the
> new prestigious certification...and more importantly, a state of mind!
>
> Cheers,
>
> Kenan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7
I am taking the exam at RTP Lab next month. Can someone provide me
following information ?
1. What kind workstations are at RTP Lab ?Laptop or Desktop ?
2. Can I choose terminal emulation software ? e.g Hyperterminal
Appreciate for any input
Desmond
Message Posted at:
http://www.g
guys,
Please explain, how to apply extended access-list so as to permit inbound
and outbound telnet access.
I want to apply the access list to same interface in and out.
Thanks,
neil.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=58750&t=58750
-
Could I use a NM-4T1-IMA with 4 regular T1 (b8zs/esf)?
I'm trying to cram as many T1's into a Cisco 3620 as possible.
The basic question is, is the NM-4T1-IMA product line ONLY compatible with
ATM T1's.
Dazed and Confused
Aaron
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&
OK,
The question is deny FTP and HTTP for these addresses:
131.24.194.x, 131.25.194.x, 135.152.1.1, 131.24.195.x, 131.24.193.x
Use least amount of lines in your ACL.
To match EXACTLY what the question asks with the minimum ACL, I come up with
this:
access-list 101 deny tcp host 135.152.1.1 eq
what type of cable do I need to connect a BRI(routera) to BRI(routerb) in a
lab?
thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=58753&t=58753
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisc
On Sat, 7 Dec 2002, mike simon wrote:
> what type of cable do I need to connect a BRI(routera) to BRI(routerb)
> in a lab?
Hi Mike,
ISDN (just like garden variety dialup modems) has the concept of dialling,
so you need a device that can provide TEI and accept dialled digits to be
passed to anoth
neil what you can do to allow both outbound and incoming telnet access by
using the command:
access-list 101 permit tcp any eq telnet any eq telnet
ip access-group 101 in/out whichever interface you would want to put this on.
I haven't tried this yet but I think this will work. It allows source
Bill,
If you want to stay legit, email the seller and ask if it is a licensed
EMI, most of them are not. One way to find out is to have them email you
a show version, and if it was not originally licensed for EMI, the model
number will reveal as SMI, even if the IOS was "upgraded". I don't know
if
This won't work because the source packet doe's not have a source port of 23
what you need to do is
access-list 101 permit tcp any gt 1023 any eq telnet (this is for inbound )
from memory traffic originating from router will not be bound by an ACL so
your out bound traffic should be alright (not 1
Chuck,
You are the ONLY person to say this to me, so I am asking the list for
confirmation what you wrote is true.
I am ordering Point to Point T1's from one location to another that is
sensitive about Rack Unit usage. I suspect if I buy two NM-4T1-IMA's and
connect up to a regular T1 it will wor
Today I upgrade my mc3810 to 64mb dram, I have also upgrade the boot-rom
chip, but when finished, I found error messages displayed on console terminal:
%MC3810_DSX1-3-ERROR: Cookie for slot 4 not programmed.
I have to use "no logging console" to stop it, I checked the CCO, it says
only to con
16 matches
Mail list logo