Dear ALL;
How we may prevent and block Rip Routing protocol from trigger dialing
through isdn BRI. And HOW we can be assured that the unknown trigger come
from RIP.
Regards
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=65482&t=65482
-
Dear ALL;
Anybody may help regarding how to configure 1721 Cisco router (Internet
Router) as a firewall if that router contains just an Ethernet port and
one BRI ISDN WAN BRI0 connectivity to Internet.
Do we need a natting to be to setup on both interfaces ETHER AND BRI.
A Sample is preferred to
Dear ALL;
Anybody may help regarding how to configure 1721 Cisco router (Internet
Router) as a firewall if that router contains just an Ethernet port and
one BRI ISDN WAN BRI0 connectivity to Internet.
Do we need a natting to be to setup on both interfaces ETHER AND BRI.
A Sample is preferred to
subscribe [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=66487&t=66487
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [E
subscribe [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=66557&t=66487
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [E
Dear ALL,
i have a cisco 3600 router , with BRI INTERFACE, DDR enabled, but it seems
all the time the connection (BRI) up (protocol up) 24 hours, anybody can
help me what make the connetion 24 hours up, it should be activated upon
traffic, dial on demand routing, what's going on?
regards
Abd qu
Dear ALL,
How can I implement a tunneling connection between two routers (Cisco 3600)
through already established leased line connection (serial line) which has
HDLC encapsulation up and running.
and how clients workstation contact the other side through that tunnel.
Kind Regards
abd quqas
M
Dear All,
anybody can tell how we can apply an access-list base on MAC Address INSTEAD
of ip address on Cisco router 3600.
Kind Regards
abd quqas
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52128&t=52128
--
FAQ, list archi
Dear ALL,
how i can make ISDN BRI to connect at 128kbps instead of 64kbps as a bundle
channel of Cisco router 3600 using ppp encapsulation.
Kind Regards
abd quqas
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52190&t=52190
-
Dear ALL,
Anybody can tell how to capture the all the data traffic over specific
serial interface (cisco router) to syslog server as tcpdump.
Regards
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52513&t=52513
--
FAQ, list a
Dear ALL,
I was looking for help on cisco router using the "?" command, i found a
command called "tunnel", anybody explain the using of that command by an
examples.
Regards
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52526&t=52526
Dear ALL,
How i can see if somebody is spoofing the access list applied on router, or
how i can test it, if the spoofing the access list can be done.
Regards
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52585&t=52585
--
FAQ
Dear ALL,
I have a remote site connected to the head office site through a least line,
A MS-PROXY is serving all local workstation in the head office using Winsock
enabled( ms-proxy-client) enabled, when i was trying to get ms-proxy-client
enabled from the remote site through the leased line conn
13 matches
Mail list logo