what kind of upgrade was done on the AS400??.
How does the AS400 connect to the network?? STUN, DLSW
-Original Message-
From: Gayathri [mailto:[EMAIL PROTECTED]]
Sent: 27 March 2001 14:41
To: [EMAIL PROTECTED]
Subject: Please help - this is quiet urgent
Hello
I have a strange probl
The connectivity is like this:
AS400 (Fast Ether) -> CAT55 Switch --? Router
The branches connect to the AS400 thru a NT Server , client access is used -
sna connectivity
"Andrew Larkins" <[EMAIL PROTECTED]> wrote in message
8F5F72F80EF5D311ADE600A0C9DCF8620112C11B@UBDCCOMJHBEX"
hy not. This will lead you
to the solution.
Good luck!
Z
PS - I hope this isn't my bank...
>From: Andrew Larkins <[EMAIL PROTECTED]>
>Reply-To: Andrew Larkins <[EMAIL PROTECTED]>
>To: Gayathri <[EMAIL PROTECTED]>, [EMAIL PROTECTED]
>Subject: RE: Please help - th
This is a wild guess, but perhaps you have some assymetrical routing
problems. By that I mean that after the upgrade the AS400 might be
"routing" differently than it was before. If it has two connections to
the network, maybe it is using the wrong one for return traffic to the
NT server. From t
So what you are saying is that
you have an NT server for a router?
-Original Message-
From: gayathri [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, March 27, 2001 9:10 AM
To: [EMAIL PROTECTED]
Subject: Re: Please help - this is quiet urgent
The connectivity is like this:
AS400 (Fast Ether
ope I can help you out here.
Allen
- Original Message -
From: "Jim Dixon" <[EMAIL PROTECTED]>
To: "gayathri" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Tuesday, March 27, 2001 12:52 PM
Subject: RE: Please help - this is quiet urgen
://www.gdd.net
- Original Message -
From: "John Neiberger" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Tuesday, March 27, 2001 10:16 AM
Subject: Re: Please help - this is quiet urgent
> This is a wild guess, but perhaps you have some
I believe you are using MS SNA at the branches end. Try the following to see whether
would solved the problem.
1. Vary off the existing branches controller.
2. rename the controller
3. Let the AS400 Recreate the controlller and devices again.
Hope it work.
Gayathri wrote:
> Hello
>
> I have a
8 matches
Mail list logo
