2008/11/24 Nikita V. Youshchenko [EMAIL PROTECTED]:
Yes, I know that, but I'm unable to connect to the phone through
DFU protocol because Neo don't offer itself as a device supporting
DFU.
Have you tried to connect usb cable AFTER freerunner started NOR u-boot?
I haven't; will do that
Le dimanche 23 novembre 2008, Dale Maggee a écrit :
drac2000 wrote:
http://wiki.openmoko.org/wiki/Jokes
:-p
Just for the record, these were contributed by various people here:
http://www.mail-archive.com/community@lists.openmoko.org/msg33921.html
And everybody is welcome to add to the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| 2008/11/24 Nikita V. Youshchenko [EMAIL PROTECTED]:
|Yes, I know that, but I'm unable to connect to the phone through
| DFU protocol because Neo don't offer itself as a device supporting
| DFU.
| Have
Hello arne
am i right in assuming that you
a) are running debian from sd card and
b) have /boot as separate fat partition
Looks like I have to go this way. The info on the Debian page to set the
1st partition of the SD to EXT2 and updating uBoot requires some
fso-util packages on the local
Hi,
Evgeny Karyakin [EMAIL PROTECTED] writes:
2008/11/24 Andy Green [EMAIL PROTECTED]:
I'm not sure what's happening to you, but your dmesg traffic would be
pretty normal if you were entering and then leaving U-Boot... the
connection would indeed timeout (-110) when we leave U-Boot and load
2008/11/24 Andy Green [EMAIL PROTECTED]:
My early problems with DFU disappeared after I took this approach in a
script, it seems it can announce under two different PIDs (this one is
for updating U-Boot):
#!/bin/bash
dfu-util -a 1 -d 0x1d50:0x5119 -D u-boot.udfu
if [ $? -eq 1 ] ; then
2008/11/24 Paul Fertser [EMAIL PROTECTED]:
It might be a silly suggestion but please double-check the usb cable
used, try to connect directly to the motherboard (avoid front-panel
connectors and usb hubs). May be you should try another PC.
By no means (as you have no dboard) you could have
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| 2008/11/24 Andy Green [EMAIL PROTECTED]:
| My early problems with DFU disappeared after I took this approach in a
| script, it seems it can announce under two different PIDs (this one is
| for updating
Hi All,
Addressbook : Is there a way to import a former qtopia sqlite file ? I
read some discussions inconclusive about it, is there some advances ?
I don't have anything for you on these.
Well I got a little impatient and did a quick and dirty patch for
zhone to read the contacts from the
i checked again and it works (you get both sim and address book
contacts but you can only add/edit/delete sim contacts). uncomment the
line that says combined = res + result.
On Mon, Nov 24, 2008 at 3:15 PM, Carl Lobo [EMAIL PROTECTED] wrote:
Hi All,
Addressbook : Is there a way to import a
Hi,
I understand that Zhone is not a fully functional phone application
and it is not supposed to be. But i think that fixing this bug is not
too hard for those who know framework and python well :)
I think i know what happens. If i restart Zhone without restarting
frameworkd it never receives
Just tried this a dozen times. It always hangs at
Bootloader: (reset target)
I log into the second termial as stated, issue s3c24xx-gpio b7=1
and wait ...wait ...wait ...
Used the reccomended rootfs etc.
Gone back to 2008.9 and see if gsm is still there ... it is!
BillK
On Tue,
Hello!
I use OE environment and I would like to use ipk files it produces to
install on my FR using opkg.
My problem is that OE doesn't include all of the compiled packages to
Packages,gz.
So after reading some ipkg instructions I run:
ipkg-make-index dir_with_ipks
But it gives me errot like:
tar:
I found the solution - you just have to change line nr. 155 in file
ipkg.py from ipkg-utils to:
control = os.popen(ar p +fn+ control.tar.gz | tar
xfzO - --wildcards '*control',r)
I think it was a problem with tar version - ipkg-utils are from year 2005.
Leonti
I'm using FSO 4.1 , and have a similar problem. Enabling debug on framework
gives messages that suggest it is sending NMEA data when frameworkd is
expexting UBX data. There's a curious message in the logs - 'exception
0x8040 was trapped' .The GPS clearly has power. Here's some of the log:
Am Monday 24 November 2008 13:33:54 schrieb Paul Fertser:
Hi,
I understand that Zhone is not a fully functional phone application
and it is not supposed to be. But i think that fixing this bug is not
too hard for those who know framework and python well :)
[...]
I noticed the same problem.
I understand that Zhone is not a fully functional phone application
and it is not supposed to be. But i think that fixing this bug is not
too hard for those who know framework and python well :)
[...]
I noticed the same problem.
i noticed that zhone now does not know about auth anymore.
On Mon, Nov 24, 2008 at 3:25 AM, The Rasterman Carsten Haitzler
[EMAIL PROTECTED] wrote:
On Sun, 23 Nov 2008 21:38:05 + Neil Jerram
[EMAIL PROTECTED]
babbled:
2008/11/23 Bernd Prünster [EMAIL PROTECTED]:
do you really care about segv ? this si not a debian issue, e17 is
still
Moritz Bitsch wrote:
Hi,
I've built a small binary package. It can be get from here:
https://turmspitze.org/files/rotate_0.0.1_armv4t.ipk
A Source package can be get from here:
https://turmspitze.org/files/rotate-0.0.1.tar.gz
I have just installed your package.
The prefix /usr/ is
mallikarjun arjun wrote:
On Mon, Nov 24, 2008 at 3:25 AM, The Rasterman Carsten Haitzler
[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] wrote:
Hello guys, can any one of u tell me how to install e17 on debian???
because i did not find any package when i typed apt-get install
Tilman Baumann ha scritto:
Moritz Bitsch wrote:
hi
i have made a similar application, can you test on SHR for me? :)
you can download from http://minucci.net/file/opkg/ruotami_0.2_all.opk
thank you
see you
___
Openmoko community mailing list
yes you can, you just need to read the top of this discussion... there is a
deb provided from some private repos
d
On 11/24/08, mallikarjun arjun [EMAIL PROTECTED] wrote:
On Mon, Nov 24, 2008 at 3:25 AM, The Rasterman Carsten Haitzler
[EMAIL PROTECTED] wrote:
On Sun, 23 Nov 2008 21:38:05
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Joel Newkirk wrote:
On Sat, 22 Nov 2008 02:58:48 +0100, Marco Trevisan (Treviño)
[EMAIL PROTECTED] wrote:
Alastair Johnson wrote:
Or you could follow
Joel Newkirk's simple lightweight configuration described at
Carlo Minucci wrote:
Tilman Baumann ha scritto:
Moritz Bitsch wrote:
hi
i have made a similar application, can you test on SHR for me? :)
you can download from http://minucci.net/file/opkg/ruotami_0.2_all.opk
thank you
Sure. But I like to point out that I'm rather biased towards
Hello guys,
I am using om-2008.9. When i try installing some packages it gives these
errors.
opkg install mokoko.
Configuring libid3tag0
Collected errors:
* Warning: remove /usr/lib/libcurl.so.4.0.1 failed: No such file or
directory
* Warning: remove /usr/lib/libcurl.so.4.0.1 failed:
On Mon, Nov 24, 2008 at 9:21 PM, Tilman Baumann [EMAIL PROTECTED] wrote:
mallikarjun arjun wrote:
On Mon, Nov 24, 2008 at 3:25 AM, The Rasterman Carsten Haitzler
[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] wrote:
Hello guys, can any one of u tell me how to install e17 on
Hi!
Are there some news about gentoo for freerunner?
It would be nice if mantainers would produce a ready to go stage4 tarball
for fast and simple deploying.
Nicola
___
Openmoko community mailing list
community@lists.openmoko.org
Hi,
thanks for testing.
I've fixed the build script and the desktop file. All files are now
with PREFIX=/usr.
I also fixed the stupid dependency error.
A updated ipkg and tgz can be get from here:
https://turmspitze.org/files/
On Mon, 24 Nov 2008 16:47:26 +0100
Tilman Baumann [EMAIL
Hi!
I've tried SHR just after the last milestone-release and it worked quite well.
At least a lot better than the most recent version I pulled yesterday where I
have no GPS anymore and the power-management ignores tapping on the screen, so
that NEO falls asleep while I'm typing... This version
Where did you find any milestone-release?
http://shr.bearstech.com/trac/ clear says:
SHR has not been released yet. There are only preview images so far.
Leonti
___
Openmoko community mailing list
community@lists.openmoko.org
Am Monday 24 November 2008 13:33:54 schrieb Paul Fertser:
I think i know what happens. If i restart Zhone without restarting
frameworkd it never receives ReadyStatus signal from
org.freesmartphone.GSM.SIM because sim was ready long ago it
started.
This should no longer be a problem as
Hello,
I recently upgraded my laptop to Xubuntu 8.10, and now I run into the
issues described in USB Networking[1] on the wiki:
- editing /etc/network/interfaces doesn't work
- Network Manager setup (with /etc/udev/rules.d/80-freerunner.rules
and /usr/local/sbin/freerunner-usb-add.sh) doesn't
FYI - the upgrade worked as described in the wiki, on mye Neo
Frerunner. Good job!
(No, I don't know if I was the victim of any GSM bugs).
--
Regards,
Torfinn Ingolfsen
___
Openmoko community mailing list
community@lists.openmoko.org
Am Montag 24 November 2008 schrieb Torfinn Ingolfsen:
Hello,
I recently upgraded my laptop to Xubuntu 8.10, and now I run into the
issues described in USB Networking[1] on the wiki:
- editing /etc/network/interfaces doesn't work
- Network Manager setup (with
Hi,
Michael 'Mickey' Lauer [EMAIL PROTECTED] writes:
Am Monday 24 November 2008 13:33:54 schrieb Paul Fertser:
I think i know what happens. If i restart Zhone without restarting
frameworkd it never receives ReadyStatus signal from
org.freesmartphone.GSM.SIM because sim was ready long ago it
Hello,
On Mon, Nov 24, 2008 at 9:07 PM, Joerg Lippmann [EMAIL PROTECTED] wrote:
I have 'auto usb0' first, then the rest of the lines are the same as yours
iface usb0 inet static
address 192.168.0.200
netmask 255.255.255.0
network 192.168.0.0
up iptables -A POSTROUTING -t nat -j MASQUERADE
up until recently I never ever experienced White Screen Of Death(wsod)
on my debain openmoko.
Suddenly I get it all the time with Debian, probably after recent
upgrades.
I've read that wsod happens after suspend. How do I completely disable
suspend in debian?
--
Joakim Verona
mallikarjun arjun wrote:
Hello guys,
I am using om-2008.9. When i try installing some packages it gives these
errors.
opkg install mokoko.
Configuring libid3tag0
Collected errors:
* Warning: remove /usr/lib/libcurl.so.4.0.1 failed: No such file or
directory
* Warning:
Yes, I know that, but I'm unable to connect to the phone through
DFU protocol because Neo don't offer itself as a device supporting
DFU.
Have you tried to connect usb cable AFTER freerunner started NOR u-boot?
...
My early problems with DFU disappeared after I took this approach in a
Dear all,
Is a little bit offtopic but due recent mp2/mp3 fight against pirat...
sorry Sysvel, maybe is interesting to spread this little bit of hope
to the Openmoko community
Trough a local FOSS-friendly news site[1] I read there is a 180
degrees in Software pattent policy in US pattent office ,
Can you contribute the result to
http://wiki.openmoko.org/wiki/USB_Networking under a Ubuntu 8.10 header?
Torfinn Ingolfsen wrote:
Hello,
On Mon, Nov 24, 2008 at 9:07 PM, Joerg Lippmann [EMAIL PROTECTED] wrote:
I have 'auto usb0' first, then the rest of the lines are the same as yours
On Sunday 23 November 2008, Joel Newkirk wrote:
On Sat, 22 Nov 2008 11:44:49 +, Al Johnson
[EMAIL PROTECTED] wrote:
On Saturday 22 November 2008, julien cubizolles wrote:
--snip--
It can wait. Just out of curiosity, is there some work being done on
this front ?
A PIM interface is
On Monday 24 November 2008, Leonti Bielski wrote:
Hello!
I use OE environment and I would like to use ipk files it produces to
install on my FR using opkg.
My problem is that OE doesn't include all of the compiled packages to
Packages,gz.
So after reading some ipkg instructions I run:
ok, replying to myself as it may help others:
First off, when I eventually got 2008.9 registered, an SMS that was sent
some hours before came in (that perennial 2008.x problem :( I surmise
that this was the reason I couldnt get it to flash (e.g., SMS waiting)
Next I shut down X on 2008.9 and
[EMAIL PROTECTED] writes:
Suddenly I get it all the time with Debian, probably after recent
upgrades.
Can you please downgrade? It would be imporant to figure out which
upgrade did this.
___
Openmoko community mailing list
Also be aware that the Network Manager in Ubuntu Intrepid is currently
buggy. If you have it running, it is prone to do friendly things like
automatically add the static IP and route for eth0 to usb0 when it comes
up. Either it controls all interfaces, or it's not running, right now it
refuses to
On Tue, Nov 25, 2008 at 2:24 AM, ivvmm [EMAIL PROTECTED] wrote:
mallikarjun arjun wrote:
Hello guys,
I am using om-2008.9. When i try installing some packages it gives these
errors.
opkg install mokoko.
Configuring libid3tag0
Collected errors:
* Warning: remove
the image i used are testing-om-gta01-20081124.uImage.bin,
testing-om-gta01-20081124.rootfs.jffs2
gta01bv4-u-boot.bin.
I followed the Wiki.openmoko.org, firstly installed required software, then
download the mokomakefile, make qemu,make run-qemu. the qemu lauched
with the menu. But when I choose
Seemingly no luck here.
T-Mobile SIM, I suppose 3G.
Still says sim missing.
-ls
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Please could you switch to original thread on [devel]-ML.
/j
Am Di 25. November 2008 schrieb Lally Singh:
Seemingly no luck here.
T-Mobile SIM, I suppose 3G.
Still says sim missing.
-ls
___
Openmoko community mailing list
On Nov 23, 2008 8:12pm, Andy Green [EMAIL PROTECTED] wrote:
Recent kernels have a workaround in that starts the card at slower clock
until the first bulk transfer completed successfully when it is cranked
up to 16MHz, that seemed to make the previous problems with some cards
pretty much go away.
May I request everybody answering to this topic please switch to the original
thread on [devel]-mailinglist[1], so we can keep all the stuff ongoing
regarding success / problems with flashing GSM-FW at one place.
Many thanks for kindly regarding this.
cheers
jOERG
Am Mi 19. November 2008
On Monday 24 November 2008 20:19:55 Torfinn Ingolfsen wrote:
Hello,
I recently upgraded my laptop to Xubuntu 8.10, and now I run into the
issues described in USB Networking[1] on the wiki:
... same here
Manual setup still works, but it is cumbersome.
Is there a better way?
It's possible to
I'm having the same problem, also with ubuntu 8.04.
Saludoss
On Tue, Nov 25, 2008 at 3:59 AM, lostdays [EMAIL PROTECTED] wrote:
the image i used are testing-om-gta01-20081124.uImage.bin,
testing-om-gta01-20081124.rootfs.jffs2
gta01bv4-u-boot.bin.
I followed the Wiki.openmoko.org, firstly
54 matches
Mail list logo
