Hi Michel Xhaard,
Thank you for your input, I tried by passing the arguments as per your
suggestion but only width(horizontal)will vary and height(vertical) will not
vary.
I checked same thing with X86 it works fine.
Don't know where is the problem, did anyone faced this problem??
Please sugge
I use mvista 2.6.20,but the mmc/sd driver has issue.It seems that in
2.6.10works well(?),now where can I get the
2.6.10kernel, I want to look for how can I modify the driver in 2.6.20kernel.
Thanks
___
Davinci-linux-open-source mailing list
Davinci-linux
Hi, there,Sorry for posting twice. I tried to make it easy to read.I tried to
built the kernel and I got the following error messageStarting portmap daemon:
portmap. Cleaning: /tmp /var/lock /var/run done.INIT: Entering runlevel: 3cess
permissions...Starting system log daemon: syslogd klogd.Star
Hi, there,I tried to built the kernel and I got the following error
messagecmemk: disagrees about version of symbol struct_moduleinsmod: error
inserting 'cmemk.ko': -1 Invalid module formatdsplinkk: no version for
"struct_module" found: kernel tainted.dsplinkk: version magic '2.6.10_mvl401
Hi,
I'm assuming UART mode is supported by a factory chip DM6446AZWT.
We have our new boards in and trying to get "BOOTME" to show up.
This is what I have done so far:
1) Verified Power and Ground to Davinci.
2) Verified the 27Mhz Christal is isolating.
3) Verified the 1.8V
Ivan Tonchev wrote:
The patch is against git. I am very interested in structural comments,
like the best way to support similar, but different boards.
My patch is against u-boot 1.2. I'm also interested to have DaVinci
support integrated in the u-boot mainline. Have you already spoken with
TI
Hi Philip,
I am trying to get a patch together to add support for the TI Davinci
processor into u-boot. I have started with one of the patches floating
around the internet and am in the process of modifying to support the
Lyrtech SFF SDR board. Currently, this patch will boot on the board and
us
I posted this on the u-boot list, and then I realized this list is also
a good place to collect comments.
Philip
Original Message
Subject: [U-Boot-Users] Starting a patch for TI Davinci support
Date: Thu, 21 Jun 2007 10:23:25 -0400
From: Philip Balister <[EMAIL PROTECTED]>
To:
If you're using Codec Engine, the semantics are that the application (on the
ARM) provides both inBufs and outBufs to the DSP. If necessary, the app can
get a physically contiguous buffer with Memory_allocContig().
The DSP reads from inBufs and writes to outBufs. When *_process() returns to
Hi,
I work on webcam with ti-davinci and i perform a codec on it.
I want to recover the outBufs buffer, which are in the dsp-side (process
function),
to the arm side.
I dont know to alloc it and how to recover it.
Please I need your help.
___
Davinc
Hi,
I git cloned kevins tree and executed below command to
get the 2.6.18 version
$ git -b checkout br18 v2.6.18
However, the new branch does _not_ have any davinci
changes and it looks to be a vanilla kernel
Any pointers on what I need to do to get davinci
2.6.18 kernel ?
Thanks !
_
On 6/21/07, feiyang yun <[EMAIL PROTECTED]> wrote:
I'm testing mmc/sd driver from git tree(2.6.20), the struct mmc_data changed
and can't compile it. I follow a patch:
http://www.mail-archive.com/davinci-linux-open-source@linux.davincidsp.com/msg00514/0001-ARM-Davinci-mmc-cleanup.patch
But it's
On 6/21/07, Trilok Soni <[EMAIL PROTECTED]> wrote:
On 6/21/07, Ivan Tonchev <[EMAIL PROTECTED]> wrote:
>
> Hi Yogesh,
>
> I took a look at GIT tree and I think that it has a different SD/MMC
> interface than the 2.6.10.
>
> For example struct mmc_data has 'blksz' and 'mrq' instead of 'blksz_bi
I'm testing mmc/sd driver from git tree(2.6.20), the struct mmc_data changed
and can't compile it. I follow a patch:
http://www.mail-archive.com/davinci-linux-open-source@linux.davincidsp.com/msg00514/0001-ARM-Davinci-mmc-cleanup.patch
But it's hard to understand it for me. can someone please pas
Ivan,
I only wish I could take all the credit, but I cannot ;) A lot of the
guys involved hang around on the IRC, so pop by #davinci sometime.
The elinux wiki in general also has loads of stuff that us embedded arm
developers will find useful. Those #edev guys (on freenode) really know
their stuf
Hi Andrew,
Your wiki is beautiful!
I created a new entry on the main page -- "Undocumented Findings" -- and
one article -- "DaVinci RBL"
Thanks,
Ivan
Andrew Armstrong wrote:
You could try the unofficial wiki:
http://www.elinux.org/DaVinci
or you could wait for an official one. Im sure one
You could try the unofficial wiki:
http://www.elinux.org/DaVinci
or you could wait for an official one. Im sure one should be along any
minute now.
Andrew
On Thu, 2007-06-21 at 11:44 +0300, Ivan Tonchev wrote:
> Hi Huy,
>
> What's the status of the Wiki/FAQ proposal.
>
> Over the pa
Hi, I could able to make my web cam work with TI-DAVINCI EMV using
gspcav1-20070508 and spcaview-20061208.
I use 2.6.20-omap1 kernel.
I connect TV to display video output, the problem now is, it video window
size is very narrow not able to see full video.
I tried different size by passing the a
Hi Yogesh,
I took a look at GIT tree and I think that it has a different SD/MMC
interface than the 2.6.10.
For example struct mmc_data has 'blksz' and 'mrq' instead of
'blksz_bits' and 'req'. SD/MMC driver from 2.6.10 has to be reworked for
this new API
BR,
Ivan
Yogesh Kumar M wrote:
Hi
On 6/21/07, Ivan Tonchev <[EMAIL PROTECTED]> wrote:
Hi Yogesh,
I took a look at GIT tree and I think that it has a different SD/MMC
interface than the 2.6.10.
For example struct mmc_data has 'blksz' and 'mrq' instead of 'blksz_bits'
and 'req'. SD/MMC driver from 2.6.10 has to be reworked fo
Hi Ivan,
Thanks Ivan for the replay but can you please confirm what ahs to be done
for the below mentioned error.
should i need to do some modificetion with kernel code.
thanks
regards
yogesh
-Original Message-
From: Ivan Tonchev [mailto:[EMAIL PROTECTED]
Sent: Thursday, June 21, 2007 2:
Hi Huy,
What's the status of the Wiki/FAQ proposal.
Over the past few days I collected valuable information about DaVinci
RBL ECC/Bad block (non)handling and I'd like to share it.
Is there an official place for such content already?
BR,
Ivan
Pham, Huy wrote:
Jean,
We're looking at the end
Hi all,
Do you know whether DaVinci MMC/SD supports MMC?
I have tested with with SD and MMC cards and it works fine with the SDs,
but doesn't detect the MMCs.
Do I have to change something to make it work with MMC?
BR,
Ivan
___
Davinci-linux-open-s
Hi Yogesh,
I haven't tested this on GIT tree, but on 2.6.10 it works. At least for
SD :)
BR,
Ivan
Yogesh Kumar M wrote:
Hi all,
I use Git kernel 2.6.20 version,when compile the mmc/sd driver, error likes:
error: 'struct mmc_data' has no member named 'req'
error: 'struct mmc_data' has no memb
hi,allwhen use cgtools of c64 for linux,how can i set difference compiler
options for different source files? Thanks!
--
Regards
Paco Wong___
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.com
http://linux.davincidsp
25 matches
Mail list logo