Re: fglrx 8.29.6 and Xorg 7.1.1 :: ABI major version mismatch

a loadable module but in use its only flickering on any window redraw. -- mit freundlichem Gruss -- regards Thomas Drillich Heugasse 4 / D-55116 Mainz / Germany fon +49 (0)6131 570 26 21 fax +49 (0)180 506 033 437 443 [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject

Re: fglrx-driver: 3D too slow

cause your display runs slow. if you don't have a correct kernel module. -- mit freundlichem Gruss -- regards Thomas Drillich -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: ati vs nvidia, how to tell if sleep is supported

, the graphics card? Anything to watch out for --- are there sleep problems with Nvidia/ATI? On ati-devices only the vesa driver runs fine -- follow the tread http://ati.cchtml.com/show_bug.cgi?id=253 -- mit freundlichem Gruss -- regards Thomas Drillich -- To UNSUBSCRIBE, email to [EMAIL

Re: ATI-drivers flickers was: ATI-driver will not start with 3D-acceleration (Update)

Thomas Drillich Heugasse 4 / D-55116 Mainz / Germany fon +49 (0)6131 570 26 21 fax +49 (0)180 506 033 437 443 [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

ATI-drivers flickers was: ATI-driver will not start with 3D-acceleration (Update)

Hello, I'm running a shuttle xpc st 20g5, with an ATI Radeon Xpress 200 on board graphics. But when I use the ati driver (8.22.5) it turns the dvi port off, and on every window redraw the desktop flickers horizontally. I do not have those problems with the std vesa driver. Do you had similar

Re: AMD64 port on a Shuttle ST20G5

Hi, I have a running st20g5 with debian etch: -- you have to install debian on ide disk -- cause sata_uli is not inside kernel -- kernel params noapic acpi=off -- setup sata raid on in bios -- if you like you could get a special debian package with kernel 2.6.15 with sata_uli

Re: Hello! from a newbie+ problems with debian for amd64+can't boot debian for i386 on amd64 from cd+can't extract sbm.bin from cd

should be finished in december, and there amd64 should be one of the standard supported systems. -- mit freundlichem Gruss -- regards Thomas Drillich -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: X86_64 on Shuttle-XPC ST20G5

from alsa-project.org shall support the realtech alc880 chipset. btw. the answer I got from shuttle support was approximately translated : Do not use such exotic chipsets like ati or nvidia on linux, use intel ;-)) -- mit freundlichem Gruss -- regards Thomas Drillich Heugasse 4 / D-55116 Mainz

X86_64 on Shuttle-XPC ST20G5

Hello, debian runs on that machine but suboptimal, here are some notes I send to the manufacturer support: sata support: sata_uli If the raid switch is turned off in the bios, the linux kernel module sata_uli detects the hard disc only after a second load. Only if the bios switch for

no correct boot after update of libpcre | debian amd64 unstable

be independend from libpcre. grep version 2.5.1.ds2-3 libpcre version 6.4-1 -- mit freundlichem Gruss -- regards Thomas Drillich -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: installer can't find disk

about problems with sata_uli, especially with the shuttle xpc st20g5. -- mit freundlichem Gruss -- regards Thomas Drillich Heugasse 4 / D-55116 Mainz / Germany fon +49 (0)6131 570 26 21 fax +49 (0)180 506 033 437 443 [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject