Hello!
Is anyone interested in a SunFire V240? I would like to sell mine around $200.
It contains an SCSI-s 4x 10k rpm
Cheetah drive array. Also a Sun X6758A PCI Dual Ultra3 SCSI Host Adapter too.
The machine switches on, but we did not have a serial cable and serial ports on
another machine t
I see. I already grabbed the original cables and after swapping them i
connected it to the motherboard by the correct way. I'm still looking for my
serial cable...
John Paul Adrian Glaubitz írta:
>On 04/10/2017 09:03 PM, transmail wrote:
>> So, it does matter, even with the
I did let Solaris chew on the DVD and after some minutes it printed the
copyrights, but after that it begun to endlessly omit this line on the console:
[AFT0] Softerror: mem_ce_simm[] out of space.
us
>know.On Mon, Apr 10, 2017 at 7:37 PM, transmail transm...@freemail.hu> wrote:I
>see, so it can go for a while, even if it does not connected properly. Good to
>know.
>
>I replaced the 80 pin cables to 40 pin ones. Does it matter for the 40 pin
>one, how it's connec
g/3050-2.jpgPlease try it and let us
>know.On Mon, Apr 10, 2017 at 7:37 PM, transmail transm...@freemail.hu> wrote:I
>see, so it can go for a while, even if it does not connected properly. Good to
>know.
>
>I replaced the 80 pin cables to 40 pin ones. Does it matter for the 4
ing messed up.
>
>Frans is absolutely right. Unless you connect the cable properly, don't be
>surprised by obscure crashes or hangs.
>
>Adrian
>
>> On Apr 10, 2017, at 7:25 PM, transmail wrote:
>>
>> But it works if it's not the blue is connected to th
try to mount it,
then it tells me, the file does not exists. And i have no idea how can i start
the network from there.
John Paul Adrian Glaubitz írta:
>On 04/10/2017 05:43 PM, transmail wrote:
>> I already moved it there, but until the SSD was on the first bus, it did not
>> appe
?
Frans van Berckel írta:
>On Mon, 2017-04-10 at 19:09 +0200, transmail wrote:
>> And which cable is correct for this machine? Because now "boot cdrom"
>> works with 80 pin too.
>>
>> It's impossible to plug the blue connector to the motherboard. The
>&
n 40 pin cables, cable select
>preferred on 80 pin cables.For the console ...You will need to set your
>output-device and input-device via setenv to switch the console to serial.On
>Mon, Apr 10, 2017 at 5:45 PM, transmail transm...@freemail.hu> wrote:Ok,
>i'll get a serial cabl
still sends messages via serial cable after
"boot cdrom" ?
John Paul Adrian Glaubitz írta:
>On 04/10/2017 03:40 PM, transmail wrote:
>> I think, it was the SSD which confused the system. Now as SSD is alone on
>> the secondary
>> channel and on the primary, the HD
blade100.ws/806-3416-10/806-3416-10.pdfPlease
> reference sections 6.2.5 and 6.2.6You might not think this matters on these
>machines, but it does.On Mon, Apr 10, 2017 at 3:47 PM, John Paul Adrian
>Glaubitz glaub...@physik.fu-berlin.de> wrote:On 04/10/2017 03:40 PM, transmail
>wrote:
&g
ot procedure.
Kevin Stabel írta:
>That's wrong.It should be set to slave or CSOn Mon, Apr 10, 2017 at 2:13
>PM, transmail transm...@freemail.hu> wrote:Nope, it's the primary master.
>
>Hartwig Atrops hartwig.atr...@arcor.de> írta:
>>Hi.
>>
>>On Sunday
in cables.On Mon, Apr
>10, 2017 at 2:18 PM, transmail transm...@freemail.hu> wrote:The setup seems
>fine: http://oscomp.hu/depot/probe-ide.jpg
>How should i setup the CS jumpers with a layout like this?
>The cables are 80 pinned. Should i replace them to 40 pin?
>
>Kevin Stab
t if it is a
>non-UDMA controller, it will not work correctly with 80 pin cables.On Mon, Apr
>10, 2017 at 2:18 PM, transmail transm...@freemail.hu> wrote:The setup seems
>fine: http://oscomp.hu/depot/probe-ide.jpg
>How should i setup the CS jumpers with a layout like this?
>The ca
ally came with the machine, but if it is a
>non-UDMA controller, it will not work correctly with 80 pin cables.On Mon, Apr
>10, 2017 at 2:18 PM, transmail transm...@freemail.hu> wrote:The setup seems
>fine: http://oscomp.hu/depot/probe-ide.jpg
>How should i setup the CS jumpers wit
e or CSOn Mon, Apr 10, 2017 at 2:13
>PM, transmail transm...@freemail.hu> wrote:Nope, it's the primary master.
>
>Hartwig Atrops hartwig.atr...@arcor.de> írta:
>>Hi.
>>
>>On Sunday 09 April 2017 22:12:52 transmail wrote:
>>> Can anyone help me o
Solaris 10.
>
>Gasha
>
>On 04/09/2017 07:56 PM, transmail wrote:
>> You were right, DVD+RW is not supported by this drive.
>> However CD-RW is and still, i cannot boot up neither FreeBSD 11, nor Debian
>> 9. Any idea why?
>> (Hitachi GD-7000 docs are here:
>&
The jumpers are fine and i believe the cables are too. Here is the result of
"probe-ide":
http://oscomp.hu/depot/probe-ide.jpg
John Paul Adrian Glaubitz írta:
>On 04/10/2017 09:44 AM, Hartwig Atrops wrote:
>> Just out of my head, my Blade 100's are not ready-to-start at the moment:
>> the
>> D
Nope, it's the primary master.
Hartwig Atrops írta:
>Hi.
>
>On Sunday 09 April 2017 22:12:52 transmail wrote:
>> Can anyone help me on this matter? No matter what i'm trying, i cannot boot
>> anything on my machine. I've tried Solaris, Linux and FreeBSD. It
Can anyone help me on this matter? No matter what i'm trying, i cannot boot
anything on my machine. I've tried Solaris, Linux and FreeBSD. It always tells
me, it "cannot read disk label", "cannot read disk label package" and "cannot
open boot device".
If i try to "show-disks", selecting the "cdr
>you could try to look up what your drive supports.On Sun, Apr 9, 2017 at 5:11
>PM, transmail transm...@freemail.hu> wrote:Yes, it is. It's a DVD+RW. And
>both the FreeBSD and Debian CD-s i tried to boot up were CD-RW. Should i try
>CD-R and DVD-R?
>
>Kevin Stabel kev
If yes, then please tell me how can i do that.
Mark Morgan Lloyd írta:
>On 09/04/17 17:00, Frans van Berckel wrote:
>> On Sun, 2017-04-09 at 16:52 +0200, transmail wrote:
>>> How can i boot up the Debian 9 netinstaller on my Sun Blade 100? Is
>>> there any manuals
isc, you could.If you do mind the cost,
>you could try to look up what your drive supports.On Sun, Apr 9, 2017 at 5:11
>PM, transmail transm...@freemail.hu> wrote:Yes, it is. It's a DVD+RW. And
>both the FreeBSD and Debian CD-s i tried to boot up were CD-RW. Should i try
>CD-
net/helpcenter/answers/different_dvd_r_formatsOn Sun, Apr 9, 2017
>at 4:51 PM, transmail transm...@freemail.hu> wrote:I've tried to set
>auto-boot? to false but it's still ejecting my Solaris DVD. What can cause
>this?
>
>Mark Morgan Lloyd markmll.debian-sp...@telemetry.c
How can i boot up the Debian 9 netinstaller on my Sun Blade 100? Is there any
manuals/tutorials about installing Debian on a Sparc machine?
I've tried to set auto-boot? to false but it's still ejecting my Solaris DVD.
What can cause this?
Mark Morgan Lloyd írta:
>On 09/04/17 12:00, John Paul Adrian Glaubitz wrote:
>> That's not a proof that this drive works. Try reading a known good medium,
>> e.g. a commercially pressed CD and see
7;ve created.
>Testing them on a modern drive is moot. Modern drives are more tolerant with
>CD-Rs and CD-RWs.
>
>Adrian
>
>> On Apr 9, 2017, at 1:02 PM, transmail wrote:
>>
>> Both medium was OK on my x86 Linux box. I tried to run Debian 9 Sparc64 by
>> &
Both medium was OK on my x86 Linux box. I tried to run Debian 9 Sparc64 by
"boot cdrom", but also no avail.
John Paul Adrian Glaubitz írta:
>On 04/08/2017 10:32 PM, transmail wrote:
>> I guess, i'm doing something wrong again, but i have no idea what.
>
>Have you
I just wrote the ISO out.
Mark Morgan Lloyd írta:
>On 08/04/17 21:00, transmail wrote:
>> I tried to boot up Solaris 10 from my Blade 100, but when i insert the DVD,
>> the drive spins up, tries to do something, then ejects itself. If i instert
>> the FreeBSD 11 CD, t
I tried to boot up Solaris 10 from my Blade 100, but when i insert the DVD, the
drive spins up, tries to do something, then ejects itself. If i instert the
FreeBSD 11 CD, then it does not eject automatically, but when i tell "boot
cdrom", it tells me, that it "cannot read disk label", the "canno
I suspected, but it was better to ask and be sure.
Romain Dolbeau írta:
>2017-04-07 18:41 GMT+02:00 transmail :
>> Maybe i don't get it, but if we stop the clock, then we must set the time at
>> every boot?
>
>Yes, but SunOS and Solaris both kick-start the clock at boo
Maybe i don't get it, but if we stop the clock, then we must set the time at
every boot? Why the clock should be stopped then?
Romain Dolbeau írta:
>2017-04-07 17:52 GMT+02:00 Mark Morgan Lloyd
>:
>> Any half-decent system designer provides a way to shut the clock down
>> on one of these chips,
This is it, isn't it? http://cmheong.tripod.com/work/mk48t02.html
I haven't found a chip like this on my motherboard. Where it is?
Mark Morgan Lloyd írta:
>On 07/04/17 13:18, transmail wrote:
>> I see. And where is that battery exactly? I only see the standard CR2032. Is
&
I see. And where is that battery exactly? I only see the standard CR2032. Is it
that big green/black box near the CPU fan's power supply connector?
Mark Morgan Lloyd írta:
>On 07/04/17 11:30, transmail wrote:
>> I tried to reset the NVRAM,
>
>It's not just that. M
Yes! That did it, it enlisted the devices, i selected the XVR-500 and then told
"setenv output-device ^Y" and then rebooted the machine. Now, it outputs via
the XVR! Many thanks man!
Frans van Berckel írta:
>On Fri, 2017-04-07 at 12:15 +0200, transmail wrote:
>> Is there
I tried to reset the NVRAM, but i did not see the result, because i did not
connected the KVM's keyboard and mouse to the machine. The case is solved now,
thankfully the machine is fully operational.
John Paul Adrian Glaubitz írta:
>On 04/06/2017 06:56 PM, transmail wrote:
>> I j
need a mouse, i did not plug the converted USB
from the KVM, so the KVM thought that there is no machine there. It somehow
transmitted the signal to make the monitor alive, but did not transmitted the
image.
Mark Morgan Lloyd írta:
>On 07/04/17 10:00, transmail wrote:
>> Okay, i figure
Is there a way to force the video output of the machine through the XVR-500?
Currently i only get the picture, if i plug the VGA into the MB's video output.
Or the XVR-500 can only be used by the installed operating systems, so i have
to install them using the MB's video out and then plug the ca
Okay, i figured it out: I was so lame, i simply
did not connected the PS/2 keyboard/mouse to the machine (i thought
the SUN keyboard will be enough), so the KVM did not shown the
image... I was such a noob, sorry for wasting your time.
transmail írta:
>Hi!
>
>I just got my Sun 6 USB key
What kind of display problem can it be? If i put an XVR-500 into it, then i'll
get a screen?
And what is that known I/O chipset problem? Can i repair it by replacing a chip?
Mark Morgan Lloyd írta:
>On 06/04/17 17:30, transmail wrote:
>> Hi!
>>
>> I just got my Sun 6
Yes i am using a monitor connected to the video port. What should i do with the
serial port?
Rick Leir írta:
>Hi TCH
>Are you using a screen connected to the video port? Try instead a serial
>port. It might be 9600 no parity. HTH -- RickOn April 6, 2017 12:56:57 PM EDT,
>tran
Hi!
I just got my Sun 6 USB keyboard, so finally i could try my Sun Blade 100.
However, i cannot enter OBP. The machine seems to be alive: after the power
button is pressed, the LED goes green, a short beep emitted, the LED flashes
five times and then remains on and the monitor switches on (but
> Most of the other init systems aren't actually maintained either. Upstart
> was dropped by Canonical and OpenRC and runit are merely moving along.
> It's
> just too much of a big effort trying to keep up when the rest of the Linux
> plumberland is moving so quickly.
Most of them? Then there are
> Compiling a package from source is not maintaining it. Maintaining a package
> means that there is someone who is looking after bugs and regressions and
> fixing them.
I have never said i am gonna maintain it. I just want to install and use it.
> There is no maintainer for sysvinit anymore whic
Hi!
Okay, thanks for warning me. If the binary support will be dropped, then i can
still compile it manually.
John Paul Adrian Glaubitz írta:
>Hello!
>
>On 12/21/2016 08:02 PM, transmail wrote:
>> Thanks, that sounds great. I also don't want to start to argue, i just
&g
Thanks, that sounds great. I also don't want to start to argue, i just
asked, if i have the choice. If you're curious about the reasons behind the
"hate", then visit without-systemd.org.
James Clarke írta:
>Hi,
>>
>> On 21 Dec 2016, at 13:36, transmail wro
Hi.
I just would like to know, if the Sparc64 port of Debian 9 will support my
XVR500 card in my Sun Blade 100 and also i would like to know, that if there
will be SysVInit in the binary repos, so i can just replace systemd with
SysVInit.
- TCH
47 matches
Mail list logo
