Right now I'm running Hamm. I'm pretty much a newbie to this. But what
good would it do to upgrade to slink? I had installation problems with
Hamm, like on the rescue disk when it would boot the kernel, it'd
automatically repartition my hard drive. And put 4 bogus partitions on
it that weren't the
On Mon, Jan 04, 1999 at 02:32:56PM -0500, Mike Rae wrote:
[..]
> "qt1g does not appear to be available".
the qt1g is the shared library from `Troll Tech' Qt-library
the actual version is 1.42.
You can take it from
http://http.us.debian.org/debian/dists/slink/
in the non-free categorie
ii qt1g
Hi !
With new kernel (2.0.36) I installed a support for 852 code page, how do I
use it ?
Thanx !
Martin Waller wrote:
> I've been a lucky boy and have got a new 56.6k modem for xams to replace
> my old 14.4.
>
> An old linux book I have (from kernel 1.2.13, and for slackware...) says
> to get fast modem speeds I have to run setserial ttys1 115200 to get
> higher modem speeds.
>
> The mode
Hi!
I am using a Debian machine as a Database Server. I am using
PostgreSQL and I am connecting to it with several Win9x
machines running access and VB50.
I installed the ODBC drivers on the win machines from:
http://www.insightdist.com/psqlodbc/
I had to change the configuration for postgreSQ
Ok, this is from the manual on lilo:
LI The first stage boot loader was able to load the second stage boot
loader, but has failed to execute it. This can either be caused by a
geometry mismatch or by moving /boot/boot.b without running the map
installer.
Not sure how to help you
>> "SI" == Sergey Imennov <[EMAIL PROTECTED]> writes:
SI> Just wondering, if 2.2.0 is out before slink is
SI> officially released, will the new kernel be
SI> shipped with slink?
No. It is not a drop-in replacement for 2.0 series. (Changes with lpt,
routing etc.)
SI> P.s. When will slink be o
Change the 'FocusMode' setting in your
WindowMaker file (which is probably in ~/GNUstep/Defaults).
You probably want 'FocusMode=Auto' or 'FocusMode=SemiAuto'.
Darko Martic wrote:
>
> Hi !
>
> How to configure WindowMaker to activate some window when mouse goes over
> it, without a click?
>
> T
Rich Harran. wrote:
>
> When you turn on your computer, it should make a beep noise through the
> internal speaker as the BIOS initialises (POST). This is so you know it
> has started correctly, for example if your monitor fails. If you do not
> get any sort of sound at start up, the speaker may
At 11:31 PM 1/4/1999 +0100, Darko Martic wrote:
>Hi !
>
>I created 'lilo.conf' but when I enter command 'lilo' I get message
>something with LOADER and BIOS ???
>
>Thanx !
>
Where is lilo.conf and what does it look like?
At 09:20 AM 1/4/1999 -0500, CJ wrote:
>Hi,
>
> I really need some (PLEASE). After I successfully installed the base
>system, I configured the /etc/lilo.conf file and when I reboot, my sytem
>displays this :
> LI
>and then freezes. Hopefully someone can help me.
here's another working example. in my case, the
Win95 host is not on the same ethernet subnet as my
debian (slink) host, so I use a command like:
smbmount //spunk/E spunk-e -I spunk.spanky.org -U spazwit
(host and user names changed to protect the innocent)
Sebastian Canagaratna wrote:
>
> I
What exactly you enter and what exactly you get?
The command to run lilo is
lilo -C /etc/lilo.conf
considering that you have /etc/lilo.conf
Andrew
> Hi !
>
> I created 'lilo.conf' but when I enter command 'lilo' I get message
> something with LOADER and BIOS ???
>
> Thanx !
>
>
> --
> Unsubs
pgptLXmn2EFLj.pgp
Description: PGP message
Hi !
I created 'lilo.conf' but when I enter command 'lilo' I get message
something with LOADER and BIOS ???
Thanx !
Hi !
Well, I still have a problem using EzPPP. As EzPPP use pppd program, I try
to run it manualy, and all I get was something like:
&/$%(&%$/%$( /&%(%&)/(&%)#/T C#N/)N )(/$#&)BC$#&)BC&/($#(/&/(
and such things, and it couldn't stop, so I had to kill that process.
Any ideas ?
Thanx !
Hi !
How to configure WindowMaker to activate some window when mouse goes over
it, without a click?
Thanx !
subscribe
Hi Debian users,
I can't use Eterm 0.8.7 from Slink with the color tint option.
Anyone too?
Have a nice day,Paulo Henrique
Does anyone know of a MP3 to WAV converter?
thanks
/daniel elenius
Hi,
I really need some (PLEASE). After I successfully installed the base
system, I configured the /etc/lilo.conf file and when I reboot, my sytem
displays this :
LI
and then freezes. Hopefully someone can help me.
Now I will give you a description of what I
>Has anyone been able to install this package and if so, where did they
>get it from, couse i downloaded it from two different debian mirrors.
I got it fine, but I should. I'm the package maintainer... :-) Try running
an md5sum on the package, and compare it against the one on the ftp site.
My lo
On Wed, 30 Dec 1998 14:56:15 -0500 (EST), you wrote:
>Marc Haber said
>> So I seem to be in a circular situation: I can't install equiv package
>> just made because I have smail installed. I can't uninstall smail
>> because I have numerous packages that require mail-transport-agent.
>>
>> How do I
When you turn on your computer, it should make a beep noise through the
internal speaker as the BIOS initialises (POST). This is so you know it
has started correctly, for example if your monitor fails. If you do not
get any sort of sound at start up, the speaker may be broken, or
disconnected.
I suspect that my PC's internal speaker is not working (I have no sound card).
I am trying to avoid replacing it.
Is there a way that can convinced me that it is not working ? Is there a
possibility that some other device (my modem, for example, which is capable
of using it with WIN3.11 software)
Hi,
One user on our computer can not start X windows one's she uses SSH to login.
Message is like:
<> X11 connection rejected because of wrong authentication at Mon Jan 4
14:10:40 1999.
a
Rejected connection at Mon Jan 4 14:10:40 1999: X11 connection from
pc781b.fnal.gov port 1171
X connecti
On Sun, Dec 27, 1998 at 02:22:09PM -0800, Evgeny Roubinchtein wrote:
> Does anyone have information/experience using XFree86 with the video
> controller that comes in Dell OptiPlex or Dimension series PCs?
> Dimensions XPS/V or OptiPlex G(X)1(P)? It looks like they use an ATI
> controller (built i
Try filerunner. Its a file manager and a ftp client
Never include a comment that will help | Andrew Ivanov
someone else understand your code. | [EMAIL PROTECTED]
If they understand it, they don't | ICQ: 12402354
need you
-BEGIN PGP SIGNED MESSAGE-
On Mon, 4 Jan 1999, Mike Rae wrote:
> Thanks for the reply. However, I tried that one first via dselect prior
> to posting, and a dependancy exists as follows
> "qt1g does not appear to be available".
qt1g is in non-free. At some point, Qt 2.0 will be release
ftp://ftp.debian.org/debian/dists/unstable/non-free/binary-i386/libs/qt1g_1.42-1.deb
>>> Mike Rae <[EMAIL PROTECTED]> 1/4/99 2:30:29 PM >>>
Thanks for the reply. However, I tried that one first via dselect prior
to posting, and a dependancy exists as follows
"qt1g does not appear to be availabl
Thanks for the reply. However, I tried that one first via dselect prior
to posting, and a dependancy exists as follows
"qt1g does not appear to be available".
Any ideas ?
Jeff Miller wrote:
>
> explorer
>
> >>> Mike Rae <[EMAIL PROTECTED]> 1/4/99 1:42:47 PM >>>
> Can anyone recommend a Win95/W
The reasoning is at the bottom of
http://master.debian.org/~branden/xsf.html
HTH,
Brandon
+--- ---+
| Brandon Mitchell * [EMAIL PROTECTED] * http://bhmit1.home.ml.org/ |
| Sometimes you have to release software with bugs. - MS Recruite
unsubscribe
explorer
>>> Mike Rae <[EMAIL PROTECTED]> 1/4/99 1:42:47 PM >>>
Can anyone recommend a Win95/WinNT like file manager for X ?
thanks
Mike Rae
--
Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
On Mon, Jan 04, 1999 at 01:31:38PM -0500, Robert Rati wrote:
> I just moved my system from one HD to another, and have been able to
> re-make all the devs in /dev but xconsole. I can't seem to find anything
> in MAKEDEV that will make that. Anyone know how I can get /dev/xconsole?
It's just name
Hi. Can someone point me towards information
on the 'xterm' vs. 'xterm-debian' configuration
and any other documentation?
thanks,
--
tony mollica
[EMAIL PROTECTED]
On 04-Jan-99 Robert Rati wrote:
> I just moved my system from one HD to another, and have been able to
> re-make all the devs in /dev but xconsole. I can't seem to find anything
> in MAKEDEV that will make that. Anyone know how I can get /dev/xconsole?
>
it is a named pipe (fifo) so the mkfifo
Can anyone recommend a Win95/WinNT like file manager for X ?
thanks
Mike Rae
I just moved my system from one HD to another, and have been able to
re-make all the devs in /dev but xconsole. I can't seem to find anything
in MAKEDEV that will make that. Anyone know how I can get /dev/xconsole?
Rob
I had X running fine with one little problem before getting a Monster 3D
II card a little while back. One small problem was that I have xdm kick
up two X windows. Well, about five minutes after boot, I would get kicked
over to the second X window for no reason. I could switch back to the
first o
any1 here who know what to put on the qvirtual option of fetchmail
I've read the docs, manpages and tried different parameters but fetchmail
barfs:
fetchmail:/home/keyoz/.fetchmailrc:8 server option after user options at
Deliver-To (or any other text after qvirtual)
I can't fetchmail when I swit
util-linux conflicts with mount. It is getting fixed.
On 04-Jan-99 Paulo Henrique Baptista de Oliveira wrote:
> Hi debian users,
> today I run dselect to upgrade my box and there was a conflict between
> modutils and util-linux and it sayed that it is going to remove a lot of
> packag
On Mon, 4 Jan 1999, Jeff Beley wrote:
>
> If memory serves, most of the recent versions of sendmail use
> procmail as their default delivery agent.
>
After I got your message, I looked and noticed that my mail was being
sorted without the .forward, just as you said... I probably wouldn't have
n
Hi debian users,
today I run dselect to upgrade my box and there was a conflict between
modutils and util-linux and it sayed that it is going to remove a lot of
packages.
I didn't upgrade of course. Anyone know if there is a problem in
current slink?
Have a nice da
I'm having similar problems on my 'slink' system with all of the
versions of netscape I've downloaded from Netscape, including the
unsupported one for libc6. In addition to the "bus error", I also get a
message about
locale `C' not supported
If I knew how, I'd consider backing off to 'ha
In article <[EMAIL PROTECTED]>,
Jose Rodriguez <[EMAIL PROTECTED]> wrote:
>Hi!
>
>I'm using the Postgres SQL database under Debian, and would like to
>convert my machine in a Database server. I would like to serve other
>machines which run under Win9x . One solution for this is via odbc.
>However
Hi !
While loading a get a line where says 'ppp can't locate module ppp', and
the same thing for slip. Could that be a reason why EzPPP after calling and
when I have to enter username always says 'The pppd daemon died
unexpectedly' ? and why is he saying that ?
Thanx !
I've been a lucky boy and have got a new 56.6k modem for xams to replace
my old 14.4.
An old linux book I have (from kernel 1.2.13, and for slackware...) says
to get fast modem speeds I have to run setserial ttys1 115200 to get
higher modem speeds.
The modem works OK, but I'm only getting a 28
I have used the command:
smbmount //HS03/scanagar /mnt -U scanagaratna
to mount a filesystem scanagar on maching HS03 on /mnt on my harddrive.
So I do not understand the problem. HS04 runs NT, and run Debian Linux 2.1
Sebastian Canagaratna
Department of Chemistry
Ohio Northern University
Ada,
Hi!
I'm using the Postgres SQL database under Debian, and would like to
convert my machine in a Database server. I would like to serve other
machines which run under Win9x . One solution for this is via odbc.
However, libodbc.so is not installed in my system (I couldnt't find it),
but I know it d
I'm tearing my hair out. Here's the story. I upgraded to hamm vi the
autosh script and grabbed the 2.0.34 kernel and recompiled it. As far
as I can tell, the modem worked OK after those steps. I then reviewed
my installed packages and upgraded a bunch of them. I also installed
diald and tried
Andrea Novara writes:
Andrea> The problem is the MIDI system. I've installed the awe32 patch on a
Andrea> 2.0.35 kernel. make xconfig, dep, clean, zImage, modules and
Andrea> modules_install configured lilo ad reinstalled it! I have a recursive
Andrea> line:
Andrea> Jan 3 04:28:50 gromit kernel:
Ian Eure wrote:
> I'm just wondering where xvidtune has got to- I don't see it on any of my
> slink systems (all current) and I have no hamm boxes left. I seem to recall
> that it was available in bo when I first started using Debian, and I see my
> old kvidtune package on one of my systems, but t
Jérôme Zago <[EMAIL PROTECTED]> writes:
> "smbclient //servif3/user4if -U jzago" works just fine but I would like to
> mount this share to /mnt/servif3.
>
> "Usage: smbmount-2.1.x service [-p port] [-d debuglevel] [-l log]"
> it seems like smbclient. where does I provide the mount point ?
smbm
> Does upgrading to slink merely involve installing the packages from the
> frozen directory? Does this upograde the kernel? I have kernel version
> 2.0.34 with hamm right now, what is the latest kernel that would be
> recommended for slink?
Im using slink with 2.0.34 and 2.0.36 - both work very we
In article <[EMAIL PROTECTED]>, Randy Edwards
<[EMAIL PROTECTED]> wrote:
> I get the same thing about several non-existent files in non-us/slink.
>This was discussed a week or two ago and I had hoped that it'd soon be cleared
>up, but it hasn't been.
I currently think that non-us.debian.org is
I will be out of the office on Dec. 31, 1998.
On Mon, Jan 04, 1999 at 01:07:59AM +0800, Richard Alhama wrote:
> Well, I finally decided to use qmail for my MTA.
> Now I can't send mail except logging into my shell account (slooowww).
> Any1 here knows how to configure qmail/serialmail on a dynip address?
Yes, install exim :-)
Sorry, but qmai
.forward:
"|IFS=' '&&exec /usr/bin/procmail -f-||exit 75 #sstrickl"
Sendmail responds to messages filtered by procmail through this .forward
with "Address <[EMAIL PROTECTED]> is unsafe for mailing to programs".
I'm not an expert at .forwards or Sendmail (yes, I plan to work on it
soon!), but this
> [EMAIL PROTECTED] wrote:
> > I am setting up a program called MOPAC7 for use in one of my chemistry
> > classes and need several libraries. I am not sure which I should be using
[...]
> > Can anyone help me with the existence and/or compatibility (when found) of
> > these with my Deb. 2.0 packa
[EMAIL PROTECTED] wrote:
> I am setting up a program called MOPAC7 for use in one of my chemistry
> classes and need several libraries. I am not sure which I should be using
> (version #),
> or if they are even available/compatible. ???
>
> need libm.so.5 => I see libm.so linked to libm-2.0.7.so
I am setting up a program called MOPAC7 for use in one of my chemistry
classes and need several libraries. I am not sure which I should be using
(version #),
or if they are even available/compatible. ???
need libm.so.5 => I see libm.so linked to libm-2.0.7.so
need libc.so.5 => have libc.so
nee
>> "MB" == Mitch Blevins <[EMAIL PROTECTED]> writes:
MB> Austanners Wet Blue Pty Ltd wrote:
>> I know this question has been asked before but i've looked in the archives
>> and cannot find much. HOWTO not much help either. I'm using fetchmail to
>> recieve mail from my isp and Mutt to read.Which
I will be out of the office on Dec. 31, 1998.
> There have been a number of reports from people recently that doing
> a presort inc sometimes fails from within exmh.
I have been doing some further experiments.
The output from exmh is as follows:
BgAction Inc IncInner
BackgroundPending Inc
exmh-bg {Inc_Presort +MyIncTmp: {child killed:
I'm just wondering where xvidtune has got to- I don't see it on any of my slink
systems (all current) and I have no hamm boxes left. I seem to recall that it
was available in bo when I first started using Debian, and I see my old kvidtune
package on one of my systems, but there is no xvidtune to be
Hi,
There have been a number of reports from people recently that doing a
presort inc sometimes fails from within exmh. The same thing has
happened to me several times. It seems to be something to do with
certain mail files which cause the problem. I can do a manual inc
from the command line, a
On Sun, Jan 03, 1999 at 06:15:25PM -0900, Christopher S. Swingley wrote:
>
> This may not be the best place to ask this, but does anyone out there know
> of a way to adjust the gamma value in X Windows? I seem to recall seeing
> something like this (although it didn't work) in gnome, but I've sin
"Harold G. Stevenson" wrote:
>
> help..on a couple major areas for me. some
> of it has too do with permission issues on my machine. i had to
> reconfigure x. i can bring it up a root or as tempuser, but not as user
> zorro. would like very much to be zorro when i bring up x.
X shoul
libIm is *WAY OLD*. There is a current Eterm package in slink/potato -- please
use it or at least grab the source and compile your own.
On 03-Jan-99 Darko Martic wrote:
> Hi !
>
> I just install Eterm and I can't start it because it keep saying something
> like: "can't open libIm.so.1". Yes, I h
I have installed Debian GNU/Linux several times, but have not yet been
able to get network support. I have a SONY VAIO PCG-505G with a CONTEC
C-NET card. According to the documentation on debian.org, I must use the
driver pcnet_cs or fmvj18_cs. I expect these drivers to be included on
the driver di
Rahsheen Porter writes:
> I noticed that "man mutt" does nothing.
> ...
> Isn't that wrong?
File a bug.
--
John Hasler
[EMAIL PROTECTED] (John Hasler)
Dancing Horse Hill
Elmwood, WI
What kernel version are you using???
<[EMAIL PROTECTED]> wrote:
> I can't figure how to mount SMB shares...
>
> "smbclient //servif3/user4if -U jzago" works just fine but I would like to
> mount this share to /mnt/servif3.
smbclient works with _any_ kernel version (2.0.x, 2.1.x, and
2.2.0prex)
This may not be the best place to ask this, but does anyone out there know
of a way to adjust the gamma value in X Windows? I seem to recall seeing
something like this (although it didn't work) in gnome, but I've since
removed gnome. I looked at all the manual pages I could think of, and the
only
On Sun, Jan 03, 1999 at 10:00:31PM -0500, Craig P. McDaniel wrote:
> Does upgrading to slink merely involve installing the packages from the
> frozen directory? Does this upograde the kernel? I have kernel version
> 2.0.34 with hamm right now, what is the latest kernel that would be
> recommended f
I noticed that "man mutt" does nothing. It says there is no page. I did
a "dpkg -L mutt" and saw this:
<-- snip -->
/usr/doc/man
/usr/doc/man/man1
/usr/doc/man/man1/mutt.1.gz
/usr/doc/man/man1/mutt_dotlock.1.gz
Isn't that wrong?
I'm running Debian slink and:
ii mutt0.95-1 T
The Netscape that comes with the Communicator 4.5 packages
is disappearing from the X Windows root window again with the
following X Windows error message.
/usr/bin/X11/netscape: line 64:364 bus error
LD_PRELOAD=/lib/libBrokenLocale.so.1 $netscape "$@"
Is there some way to
Does upgrading to slink merely involve installing the packages from the
frozen directory? Does this upograde the kernel? I have kernel version
2.0.34 with hamm right now, what is the latest kernel that would be
recommended for slink?
Later,
_) Craig McDaniel
_)_) [EMAIL PROTECTED]
_)_)_) [EMAIL PR
Actually, kernel-package and make-kpkg did a good job of getting
kernel 2.1.132 installed here. The way these kernels are going into
/boot is a good thing, too, IMO, although I needed to make link
afterward ( but maybe I only had to do that because I made a mistake
with this system in the pas
Tom, take a look at vmlinuz in the "/" directory. Then look
at "/boot/vmlinuz-2.1.125." See what I mean? You might try symlinking
from /vmlinuz (after renaming or removing it) to /boot/vmlinuz-2.1.125,
if it's there as my 2.1.132 kernel is. ...not sure about 2.1.125, but it
might be a goo
Does 'make install' put vmlinuz where lilo expects it to be? You might
install kernel-package and use 'make-kpkg' to compile the kernel and
create a .deb which you can install. This works quite nicely.
Bob
On Sun, 3 Jan 1999, Tom wrote:
> I am trying to upgrade from 2.0.36 to 2.1.125. After c
Here is the answer of Jim Pick, gnome mantainer for this question.
> I'm aware of this behaviour. I had talked to the Gnome guys, and was
> hoping that they would fix it upstream, but they didn't.
Take a look in the "Gnome 0.30 x KDE" thread in debian-devel (October)
The point is that the Gnome
I will be out of the office on Dec. 31, 1998.
I am trying to upgrade from 2.0.36 to 2.1.125. After configuring with
"make xconfig" I run "make install". At the end I run lilo. Everything
seems fine, but when I reboot I am still in 2.0.36. I tried some
variations. I ran "make dep", and saw no error messages. I tried
compiling a 486 kernel
Hello,
I still have problem with natscape 45.
I have installed Debian 2.0r3.
I have used apt-get to download netscape-base-45 from slink, but I have the
fallowing
error:
/usr/local/home/paolop$ netscape
ERROR: /usr/lib/netscape/45/communicator/plugins/libnullplugin.so: undefined
symbol: FE_GetTopl
On 3 Jan, Olafur Jens Sigurdsson wrote:
> Þann 03. janúar 1999 reit Stephen Pitts svohljóðandi:
>
>> I've already got it installed, don't remember having any problems with
>> it. Perhaps try a different floppy disk? Debian packages can be
>> copied. What error message are you getting? What does d
*- Stan Brown wrote about "Anyone know a program to read HP690C printer status?"
> I have an HP 690C printer which I use. This printer
> supportbi-directional communications under windoze, to tell when ink
> cartrdiges are empty etc. Has anyone rverse engineerd this?
>
>
I get
87 matches
Mail list logo
