No warm up time for ink jets? My Canon i560 inkjet does a little dance
that lasts for over a minute when it first turns on. My Lexmark laser
takes maybe 5 seconds from power on switch to when it starts printing.
:-) Guess we should be careful with generalizations! (And there's no
comparison fo
At 03:35 PM 3/25/2007, Dick Flanagan wrote:
>At 12:28 PM 3/25/2007, Karl Oyster, K1KO wrote:
> >Can anyone tell me if there's a way to do a global change from UPL
> >CONF but no regular confirmation to both UPL and regular showing
> >as confirmed.
>
>Preferences -> QSO -> Confirmed QSOs -> "Card o
I differentiate by Upl Cnf = Y for LOTW only And Cnfm = Y AND Upl Cnf = N
for cards.
Bryan, ZL1NI
> . have
> both flags set would make it more difficult to determine which
> confirmed QSOs were only on cards and/or which were only on
> LOTW
>
> Karl, K1KO
> Virg
Thanks to all who responded. I decided to save a copy of the log
(always a smart move, I think), and hen did the search (F8) for
UPL CNFM marked Y, then to QSO|Multiple QSOs Operation|Set
Confirmed Flag|Yes.
Worked like a champ, which is usual, it seems with DX4WIN.
Incidentally, one gent, Di
At 02:11 PM 3/25/2007, Les Kalmus wrote:
>Back up up your log.
>Do a search (F8) for QSOs with the UPL CONF flag set to yes. Then
>QSO|Multiple QSOs Operation|Set Confirmed Flag|Yes.
>This will set all the selected QSOs to Yes for both.
The big problem with actually setting both flags is you l
Has anyone printed directly on a QSL using an HP LaserJet 6? Will this
printer accept QSL sized stock?
Les W2LK
Roger D Johnson wrote:
> [EMAIL PROTECTED] wrote:
>> Cesar and Group
>>
>> I use a laser printer to direct print on the QSL cards.
>>
>> I have used an inkjet in the past. It prints
Back up up your log.
Do a search (F8) for QSOs with the UPL CONF flag set to yes. Then
QSO|Multiple QSOs Operation|Set Confirmed Flag|Yes.
This will set all the selected QSOs to Yes for both.
73, Les W2LK
Karl Oyster, K1KO wrote:
> With the advent of LOTW there have been lots of qsls which are
[EMAIL PROTECTED] wrote:
> Cesar and Group
>
> I use a laser printer to direct print on the QSL cards.
>
> I have used an inkjet in the past. It prints a less than desirable results.
> It will blur if it accidentally comes in contact with a liquid source.
>
>
I just did a test with my HP
Thanks for all the replies. Obviously, I had not progressed along far
enough in the label printing process to realize that Dx4win allows you to
skip over missing labels and thus use a partial sheet of label; neat!
73 - John, W4AU
--
No virus found in this outgoing message.
Checked by AVG Free
At 12:28 PM 3/25/2007, Karl Oyster, K1KO wrote:
>Can anyone tell me if there's a way to do a global change from UPL
>CONF but no regular confirmation to both UPL and regular showing
>as confirmed.
Preferences -> QSO -> Confirmed QSOs -> "Card or upload"
73, Dick
--
Dick Flanagan K7VC NV SM
[EM
10 matches
Mail list logo
