Good morning all
I have seen some postings of EXPERT 1k users here on the reflector, I need
your help.
A friend has a K3 and a P3. Now he wants to connect his EXPERT PA to this
combo. The problem: The K3 RS232 is occupied by the cable to P3, both P3
RS232 are occupied by Cables to k3 and PC. Becau
Dear Peter,
Your friend needs to make a Y-cable from the K3 to the Expert according to
the Expert manual so the Expert can listen but not transmit via this cable.
And remember the Expert is slow so you have to select the right
communication speed. I do not remember exactly but I believe it is 1
The SPE Expert has the standard BCD band data interface as well. You can
just feed the band data outputs of the K3 to the SPE Expert and not even use
the RS232 interface.
Phil - AD5X
"Good morning all. I have seen some postings of EXPERT 1k users here on the
reflector, I need
your help. A f
This is the way I have my K3/P3 combination connected to the 1k-FA, and it
works well.
Stewart G3RXQ
On Mon, 28 Nov 2011 07:00:26 -0600, Phil & Debbie Salas wrote:
> The SPE Expert has the standard BCD band data interface as well. You can
> just feed the band data outputs of the K3 to the SPE Ex
Purely as a matter of interest, how much current does the KPA500 draw on CW key
down?
73 de M0XDF (K3 #174, P3 #108, KX3 #???)
--
He who asks is a fool for five minutes, but he who does not ask remains a fool
forever. -Chinese proverb
___
Good Day Everyone,
Has anyone figured out which Pelican case will accommodate the KX3?
Txn es 73
John KK4BOB
--
John Flynn
Tallahassee, Florida
USA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
On my resonant Tribander with 1.2.1 SWR and the bargraph indicating 500W
output, mine pulls 11.9 amps with the HV measuring 62.5 volts for a drain input
power of 743.75 watts. The amp is being run on a mains voltage of 240. Drive
power from the K3 indicates 28 watts.
Jim - W0EB
> Purely as a
Thank you very much, just what I wanted to know.
73 de M0XDF
--
When a distinguished but elderly scientist states that something is possible he
is almost certainly right. When he states that something is impossible, he is
very probably wrong.
-Arthur C Clarke, science fiction writer (1917-2008)
Does anyone know if Rose is making a padded, soft case for the KX3 that will
protect it inside a backpack?
73,
Phil, NS7P
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net]On Behalf Of John Flynn
Sent: Monday, November 28, 2011 8:26 AM
To:
In fact, Phil, my K3/10 probably qualifies as QRP full-time though I
do get 16w out at max on 2m. I think you will notice the difference
the first time I check-in at 300w ;-) Still haven't started work on that kit.
My current interest is modifying and older DEMI 2m transverter to be
ready for
On 11/28/2011 06:25 PM, Phillip Shepard wrote:
> Does anyone know if Rose is making a padded, soft case for the KX3 that will
> protect it inside a backpack?
Will a soft case protect a tuning wheel inside a backpack?
Jon LA4RT
>
> 73,
> Phil, NS7P
>
> -Original Message-
> From: elecraft-
I've been working with Wayne at Elecraft on a dust cover for
the KX3. Prototypes have been sent back and forth, and a
design is almost finalized.
The paddle assembly will be an option, and I'd like to know
if there are those who would -not- purchase the paddles, and
therefore would not want an op
I would not purchase the paddles. I want to use the money to purchase the
battery pack etc instead
73s
--Original Message--
From: Rose
Sender: elecraft-boun...@mailman.qth.net
To: Elecraft Reflector
Subject: [Elecraft] Dust cover for the KX3
Sent: Nov 28, 2011 15:06
I've been working wit
My KPA500 is as follows:
500 watts indicated on LEDs
Current: 10.3 Amps at 500 watts indicated on LEDs
Idling current: (key down - no modulation) 400 ma
Voltage at 500 watts: 59.8v
Power as indicated on display: 530 watts
Power dialed in on K3: 39 watts
Power source: 240v
Freq: 3.781 Mhz
SWR: 1:1
Is there any plans for a matching power supply for the K3?
Thanks,
Tim Herrick, KQ8M
k...@kq8m.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Rose...
I have a couple of your K3 soft cases (happy with 'em!) and will
want a carry-case of some sort for my putative KX3. I will definitely
have the paddle "option," and would possibly want extra space for mic
and for a small power supply and other stuff. Altogether, the space in
the K
Hmm, this works out to an efficiency of 87%!
Not sure I believe that.
73 de Brian/K3KO
On 11/28/2011 20:34, Roy Morris wrote:
> My KPA500 is as follows:
> 500 watts indicated on LEDs
> Current: 10.3 Amps at 500 watts indicated on LEDs
> Idling current: (key down - no modulation) 400 ma
> Voltage
On 11/28/2011 12:06 PM, Rose wrote:
> The paddle assembly will be an option, and I'd like to know
> if there are those who would -not- purchase the paddles, and
> therefore would not want an opening in the cover for them.
I likely will not get a KX3 ... KX1 and K2 pretty much fill my needs ...
b
There is a 4 watt discrepancy between the 39 watts dialed in the K3 and the
43 watts that is shown on my PowerMaster meter. The PowerMaster coupler is
attached directly to the output of the K3 (using a double male connector)
with a 5 foot length of RG8 coax to the input of the KPA500. The
Pow
An alternative view from a 71 year old. I don't "backpack" in the usual
sense, I have some orthopedic injuries from long ago, but I've become
addicted to Summits On The Air and do make 1-2 mile "final ascents" to
summits that have roads or good trails with a back pack.
My "K2 Rose case" holds
Like virtually all "fixed tune" or "no tune" rigs, the efficiency and so
current demand varies widely with SWR since the output filters cannot be
adjusted to compensate. (There was an advantage to "dipping the final" in
the old rigs - it kept the efficiency up.)
Also, the efficiency and so current
Good evening, I was in the CQ WW CW contest this weekend and was operating at
500mW's or QRPp level. There were times I had to pump the power up to 5 watts
to make the contact, then bring the level back down to 500mW's. Is there a
macro or other way to toggle the rig back and forth between the
* On 2011 28 Nov 17:50 -0600, Mike Weir wrote:
>
> Good evening, I was in the CQ WW CW contest this weekend and was operating at
> 500mW's or QRPp level. There were times I had to pump the power up to 5 watts
> to make the contact, then bring the level back down to 500mW's. Is there a
> macro o
Hi
I just learned about macros myself.
Try this- open the k3 utilitiy program and connect it to the k3
Open the command tester tab.
Click edit macros.
In the labels give it a label maybe 5 for 5watts.
In the command to right type in 005or pc0051;
I have not tried it so I am not sure
Hello 6m (or aspiring 6m) DXers!
I have purchased a quantity of the Harris Platinum I Channel 2 amplifiers for
the
purpose of making them available at an affordable price to serious 6m operators
-
especially those in rare DXCC - who have been limited to "barefoot power". 10w
input
produces
Went through my documents and can describe more completely the mods, some of
which I had forgotten. Maybe useful as a list for others. Also below is
detail on my XV144 I had mentioned.
ELecraft modules:
K2/10 10W QRP Rig
KSB2 SSB Module
K160RX 2nd RX ant + 160Meter band
K60XV Xverter+60M band
My DX club newsletter reports that the HK0NA expedition will put Malpelo on
the air some time around Jan 24, 2012. The expedition will feature K3s and
KPA500s on all bands. I don't have actual data, but it seems that of all
the DXpeditions that I've worked this year, half the radios have been
Elecr
Hi Gang, my utility is about to roll out smart meters and it occured to me will
it generate rf on hf? It will be 6' from shack. Anyone pulling their hair out
over smart meters? I hope not.
73
Mike R
Sent from my spy ring
Amateur/Ham Radio KE5GBC
HF & Echolink
_
Here's some info from the ARRL regarding smart meters:
http://www.arrl.org/smart-meters
Bob NW8L
>Hi Gang, my utility is about to roll out smart meters and it occured to me will
>it generate rf on hf? It will be 6' from shack. Anyone pulling their hair out
>over smart meters? I hope not.
>
>73
>
29 matches
Mail list logo