Re: [Elecraft] P3 v1.57 / SVGA v1.31 BETA firmware available

Hi Vic, As far as I know no work was done on that particular bug for this release. 73, Paul -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-v1-57-SVGA-v1-31-BETA-firmware-available-tp7614603p7614613.html Sent from the Elecraft mailing list archive at Nabble.com.

Re: [Elecraft] P3 v1.57 / SVGA v1.31 BETA firmware available

Jim, I'm not familiar with that macro design. I do know that this version allows intermixing of P3 and K3(s) commands within the same keyboard macro. 73, Paul -- View this message in context:

Re: [Elecraft] P3 v1.57 / SVGA v1.31 BETA firmware available

The bug that the p3 and svga freeze for a second or three apparently randomly still exists in the production firmware. It's particularly noticeable when operating QSK CW in a pileup. Does this version address that? Vic 4X6GP/K2VCO > On 26 Feb 2016, at 12:42 AM, Paul Saffren N6HZ

Re: [Elecraft] P3 v1.57 / SVGA v1.31 BETA firmware available

So with this firmware will it be possible to do the DX on the LHS of the P3 screen and the pileup to the right and assign it to a P3 Fn key? jim ab3cv On Thu, Feb 25, 2016 at 5:42 PM, Paul Saffren N6HZ wrote: > BETA firmware packages for the P3 & SVGA are now available for

[Elecraft] FS: Buddipole antenna w/tripod, mast, rotating arm/vertical kit

Hello all, I am putting up for sale my Buddipole portable HF antenna. The accessories that I have match well with the "Buddipole deluxe" version that the manufacturer now sells. Included are a tripod and mast, buddipole matching carry bag, clamp for vertical configuration (with counterpoise),

Re: [Elecraft] K3 transmit out of band question [ANSWERED]

Rats. I was hoping for a broader answer. I have a custom 432 DEMI transverter with a *26* Mhz IF. Any ideas how well / if the K3 transverter output would work on 26 Mhz? (I have the KBPF3) Thanks, Bert - K4AR   Bert Rollen, PMP rol...@comcast.net 865-599-6074 -Original

Re: [Elecraft] FS: QRPworks Key Log Go, Mint Condition

Sold! -- View this message in context: http://elecraft.365791.n2.nabble.com/FS-QRPworks-Key-Log-Go-Mint-Condition-tp7614590p7614607.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home:

Re: [Elecraft] and now something completely different.. the w2

Oh one more thing, this of course means that you cannot have both in the same antenna chain in this mode.. the big case for this being if you wanted an inboard low power sensor, and an outboard high power sensor. This is not possible with the W2 and you would need 2 wattmeters. But it works

Re: [Elecraft] and now something completely different.. the w2

Hi Dave hope all is well, haven't seen you for quite a while now. It works.. and the magic answer was... drum roll See the "W2 Owners Manual Rev D2", available on the Elecraft website. > On page 5, "Important note" #5, it describes how to put the W2 into > "search" mode. The W2 will

[Elecraft] NEOGRIP

Thanks to all for the help, I did finally navigate the Elecraft site and find it. Difficult site, or perhaps I've accumulated too many birthdays for this new spider web stuff. I do remember when dirt was young. 73, Fred K6DGW - Northern California Contest Club - CU in the Cal QSO Party 1-2

[Elecraft] P3 v1.57 / SVGA v1.31 BETA firmware available

BETA firmware packages for the P3 & SVGA are now available for download from the Elecraft website. These BETA versions contain new features as well as several bug fixes. With these versions we introduce the ability to embed P3 commands within SVGA keyboard macros. Also new is the ability to

[Elecraft] K3 FS Mint

Elecraft K3/100 #7504, which includes all factory upgrades. This is a good basic K3 that won't take much to Option up. K3SYN3AUPG newest Synthesizer option installed. This significantly improves receiver performance. KXV3A Receive ANT IF out and XVRTR Interface board. KIO3 I/O board

Re: [Elecraft] HRD question

A full reinstall of Win 10 was made and the problem went away. The only thing changed on my Windows system is the updates (no control over them). Bill W2BLC K-Line __ Elecraft mailing list Home:

Re: [Elecraft] Best Place to Sell Equipment?

On Thu,2/25/2016 4:32 AM, Jose Rivera wrote: I am looking to sell some of my Yaesu Radios in order to purchase a K3s. What are good reliable places to sell my radios? (FT-950 and FT-857D). I've successfully used eham classified for many years. As with any public site like this there are

Re: [Elecraft] K3 transmit out of band question [ANSWERED]

Elecraft have confirmed "You would not need to use the KBPF3 for only 50 kHz out of band on 20M" Great news. Thanks to all you great folks. 73 from David GM4JJJ > On 25 Feb 2016, at 13:40, David Anderson wrote: > > Thanks also to Ken K3IU who has tested his K3 with and

Re: [Elecraft] K3 transmit out of band question

Thanks also to Ken K3IU who has tested his K3 with and without the general coverage bandpass filter enabled and found no difference in receive sensitivity between 14.350and 14.400. Question answered! 73 from David GM4JJJ > On 25 Feb 2016, at 12:46, David Anderson wrote:

Re: [Elecraft] HRD question

I believe it has been made to run under WINE. I personally don't have details though. 73 Dave G0WBX In any case, what your asking isn't a HRD question, but more a Windows OS question. Best you look in Task Manager (with show process from all users selected) to see what the differences are

Re: [Elecraft] Best Place to Sell Equipment?

Jose, I have always used KA9FOX's classifieds site. Sold and bought many radios from his listings for many years. 100% satisfied. http://swap.qth.com/index.php GL Gene, N9TF K3S 10057 P3 -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jose

Re: [Elecraft] Best Place to Sell Equipment?

Hi Jose! FWIW, I've never had a problem with E-Bay or PayPal, and I have a 100% rating for over 200 transactions. It's the only place I use. 73 Ken - K0PP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft

Re: [Elecraft] K3 transmit out of band question

Perfect many thanks Don. 73 from David GM4JJJ > On 25 Feb 2016, at 12:17, Don Wilhelm wrote: > > David, > > Transmission only 50 kHz above the ham band should not be a problem. If you > see a dropoff in receive sensitivity, than add the KBPF3. > > 73, > Don W3FPR >

[Elecraft] Best Place to Sell Equipment?

I am looking to sell some of my Yaesu Radios in order to purchase a K3s. What are good reliable places to sell my radios? (FT-950 and FT-857D). I am trying to avoid ebay. I live in New York City, Manhattan. Jose N2LRB n2...@n2lrb.com

Re: [Elecraft] K3 transmit out of band question

David, Transmission only 50 kHz above the ham band should not be a problem. If you see a dropoff in receive sensitivity, than add the KBPF3. 73, Don W3FPR On 2/25/2016 4:02 AM, David Anderson wrote: Still not got a definitive answer to my question, which I repeat: K3 - Do I require the

Re: [Elecraft] K3 transmit out of band question

Still not got a definitive answer to my question, which I repeat: K3 - Do I require the general coverage bandpass filter option to allow transmission just for an extra 50 kHz above 14.350? ( provided the radio is unlocked for transmit beyond the ham bands). 73 from David GM4JJJ > On 24 Feb