And I still find it faintly obscure that IC pins are spaced at a tenth of an
inchwhere does that come from?
Older hams this side will recall school exercise books which had all the
imperial measurements printed on the back. Horse racing still deals with
furlongs (the length of a furrow...)
Francophone kit-builders will enjoy the site of F6BQU.
For some reason my posting is sent back if I paste the right address; but
you'll find him as lpistor using chez.tiscali.fr and then go to "Entree du
site" then "la passion du radioamateurisme" and "mes realisations publiees dans
la presse s
From: Pete, G0PKS.
FWIW: When I was first learning morse using pre-recorded cassettes on a walkman
I quickly become familiar with the content; I then wired the output from a
practice sidetone oscillator to one headphone and the walkman to the other.
You quickly judge whether you are keying sy
From: Pete Norman, g0pks.
I've come across some very neat, physically small, switch mode power supplies,
rated at 23A. Is the general consensus that these are A Good Thing or To Be
Avoided At All Costs?
I'll be needing to equip myself with something soon (I hope) and any advice
would be hel
>From Pete Norman:
I don't know whether you get the same adverts stateside for certain stains and
varnishes but there's one over here that simply says, "It does what it says on
the tin!"
I am delighted to say that on a thoroughly miserable day in Somerset I feel
dead chuffed because #4609 is a
From: Pete Norman
Hi everyone! I've got the crystal zero beat on 4 MHz but the best PLL range I
can manage is 9.5 kHz which is frustratingly close to the required range! I
think everything is in the right place! Any suggestions, please? Pete, g0pks.
__
From: Pete Norman
Well those pesky IC pins must have behaved themselves because when I switched
on for the first time everything checked out A1 OK and I think that's the first
time I can ever say that
All the more exciting because I am doing an audio diary of my build for a
magazine I do re
From: Pete Norman
Thanks for all the interesting feedback, everyone! What an amazing pool of
knowledge there is out there... Pete, g0pks.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscrib
From: Pete Norman
Hello everyone! I'm just toddling along with my build. The major problem so
far has been fixing the bail to the bottom panel! What a beast!
Anyway, it occurs to me (and has often occurred to me) why do we have to reform
the pins on ICs? How come they aren't manufactured th
9 matches
Mail list logo
