Hi,
We have an early serial K3 which has got an issue with power spikes. I have
done a TX gain calibration without it making a difference. The spike
happens mainly when you have changed to a new band and during the first
transmission. After that the spike is a lot smaller and not much of an
issue.
Hi,
I posted earlier that I had accidentally gotten too much RF input into one
of the K3's at the station during a contest, when an operator switched the
radio to 30m where there is no BPF.
D25 had broken, so I changed that and all bands except 30m work just fine.
40m has got problems sometimes b
ou know, my K4D
> arrived. :-)
>
> 73 Eric WD6DBM
>
> On Sat, Jan 21, 2023, 12:47 PM David Olean wrote:
>
>> I have #1504 and it does not add any spike ever. I have no idea what
>> would cause a spike. Does this happen on CW?
>>
>> Dave K1WHS
>>
>> On 1/1
Hi,
I have 5 pcs Elecraft K3 in my shack and one of them, which is a very early
model (serial #1938) suffers from quite a power spike when transmitting.
You can clearly notice it on the amplifier and it is only this K3, none of
the others.
Can somebody give me some insight on this?
/Mike, SJ2W
_
up barely switching any thus just generating noise
instead. By adjusting it so it switches properly the problem went away.
73 de Mike, SM2WMV (SJ2W)
http://www.sj2w.se/contest/
On 8 November 2019 at 23:26:32 +01:00, Mikael Larsmark wrote:
> Hi again,
>
> I tried the factory settings a
port.
>
>
> Dick, K8ZTT
>
>
>
> Sent from Yahoo Mail on Android
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSigna
owth&af_sub3=EmailSignature>
>
>
> > On Fri, Nov 8, 2019 at 10:01, Mikael Larsmark
> > wrote:
> >
> > Hi,
> >
> > I am having an issue which confuses me quite a bit. When I unplug my
> > antennas and listen to 80m for example I have very l
Hi,
I am having an issue which confuses me quite a bit. When I unplug my antennas
and listen to 80m for example I have very low noise and the S-meter does not
light up a single bar. When I go to 160m and do the same thing I have S3-S4 and
I can hear a much higher noise level. It is the same beh
8 matches
Mail list logo