It's time to let go my Elecraft KX1 4 bands (S/N:2284)
It has the following options installed:
KXB3080
(80,30 Meters);
Internal tuner (KXAT1);
Morse Key KXPD1 paddle include.
It was build by me in 2012, it's aligned and in fully working condition with
minor use marks.
I am asking 350 EUR pl
Hi all,
I have been building my Elecraft K2 serial 7179 since July 2011, it works fine
since day one and it has the KAT2, KIO2, KNB2, K160RX, KSB2 and the just
installed KAF2.
I always notice that the my MDS readings whit the XG2 on 20 Meters band are 4
dB lower, I can read -135dBm (pre-amp ON,
Hi,
I would like increase the available current from KIO2 pin 8 from 50 mA to about
300 mA. I want to power a NUE-PSK modem and a NESCAF filter with a CW tune
indicator. I did notice that the current limit is due to L1 on the AUX2 Board.
Can I replace L1 with 6 turns off wire on a FT37-43 ind
it SOUNDS equal, leave it
> alone.
>
> 73, Guy.
>
> On Thu, Jul 28, 2011 at 11:06 AM, Pedro Correia
> wrote:
> >
> > Good Morning,
> >
> > Just finish my K2 serial 7179 a week ago, I run thru the menus and I was
> > learnig how to use it in the best
Good Morning,
Just finish my K2 serial 7179 a week ago, I run thru the menus and I was
learnig how to use it in the best way, and now I do not undurstand the Keying
Weight (DOT) menu. Shouldn't it be in a 1:1 default setting? I am used to a 1:1
ratio, for that the menu is 1.00 setting? Right?
sure on the main board when the bottom cover is in place.
>
> 73,
> Don W3FPR
>
> On 11/9/2010 11:00 AM, Pedro Correia wrote:
> > Hi,
> >
> > I have a problem with my KX1, I notice that if apply some minor force to
> > the covers my audio level will vary. This som
Hi,
I have a problem with my KX1, I notice that if apply some minor force to the
covers my audio level will vary. This sometimes appends if I tap the main knob.
I did a full soldering rework and still no solution.
Any ideas please.
Best regards,
Pedro Correia, CT2GET
7 matches
Mail list logo