Folks,
I appreciate all the feedback that I have received. I am now able to
link up to Winlink stations
reliably with my K3 and my SCS DR-7400.
73,
Tony L. (KJ5XF)
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/li
in:
TNC setup values in Winlink (RMS Express)
K3 settings used.
73,
Tony Lyon (KJ5XF)
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
level
is WA lower than what I need on either MixW or MultiPsk.
With the 2 tweaks mentioned above, now copy is where it should. That's
what I really enjoy
about this Elecraft email list. Lots of good feedback...
73,
Tony Lyon (
my Signalink pots (except Delay) are usually at 12 o'clock.
__
Slava (Sal) B, W2RMS
w2...@arrl.net
On Jun 24, 2014, at 9:47 PM, Tony Lyon wrote:
Folks,
I decided to try HRD/DM780 for first time after using another HF digital
software program for
probably 10 years. I am
all the way, I had solid copy. Where is yours set at?
73, Steve K6SAB
On Jun 24, 2014, at 6:47 PM, Tony Lyon wrote:
Folks,
I decided to try HRD/DM780 for first time after using another HF digital
software program for
probably 10 years. I am using an Elecraft K3 and a SignaLink USB interface
Hi Gerald,
My K3 is indeed set to Data Mode. The bandwidth is set correctly and I
also have the default settings.
I also have re-installed HRD/DM780 I also re-checked the Signalink
soundcard settings and they are OK.
Still no go... TX is fine, RX drops characters.
73,
Tony L. (KJ5XF)
Folks,
I decided to try HRD/DM780 for first time after using another HF digital
software program for
probably 10 years. I am using an Elecraft K3 and a SignaLink USB
interface and both
MixW and MultiPSK fine with ZERO problems on either RX or TX. With
HRD/DM780 (version 6.2) the K3
will TX
Greetings,
Thanks to all who responded.. I found a ham here in Austin that will be
giving me a demo
of his K3 tomorrow afternoon.
73,
Tony L. (KJ5XF)
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: ht
in the SSB characteristics of the K3. CW. I am in the pre-purchase phase
and would like to get an idea of how the K3 is like. If someone could help
out, I would
appreciate it if you could contact me off the list.
73,
Tony Lyon (KJ5XF
lling it is to fund the purchase of
a K3/100. If you're interested, send an email to *tonykj5xf at gmail dot com
*
and I can send detailed pictures of it.
$1100 + shipping (CONUSA only)
73,
Tony Lyon (KJ5XF)
__
Elecraft mailing list
obile. Pictures available upon
request.
$1000 + (shipping and insurance costs)
Please contact me directly off list...
73,
Tony Lyon (KJ5XF)
Reason for sale: Selling one of my K2/100's to get funds for my upcoming
K3/100... :-)
___
Elecraft mailing li
know and I can also also send some pictures.
73,
Tony Lyon (KJ5XF)
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman
Don,
Thanks for the info. Well, I would like to get 2 of your boards from you...
So, what's the cost and where do I mail the check to?
73,
Tony L.
P.S. Thanks a lot for all of the great hints regarding the AF direct output.
I REALLY hope that Elecraft considers adding an HF digital port
to drive the AF input of a
RigEXpert?
73,
Tony Lyon (KJ5XF)
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman
Folks,
After wearing out the front panel headphone connector (twice in 2
yearsdue to
connecting/disconnecting soundcard cable for HF digital modes) it has
become
quite obvious that I need a dedicated HF digital interface port for my
K2/100.
I looked through the LA3ZA K2 mod information
15 matches
Mail list logo