Hi Sal,
Yes, I went through the Signalink audio level config again and no change.
The Signalink pots are also set just like yours.
73,
Tony L. (KJ5XF)
Hi Tony!
Have you gone through the Signalink audio levels config procedure?
Is it possible that its just Windows audio levels that are low?
All my Signalink pots (except Delay) are usually at 12 o'clock.
__________________
Slava (Sal) B, W2RMS
w2...@arrl.net
On Jun 24, 2014, at 9:47 PM, Tony Lyon <tony.l...@austin.rr.com> wrote:
Folks,
I decided to try HRD/DM780 for first time after using another HF digital
software program for
probably 10 years. I am using an Elecraft K3 and a SignaLink USB interface and
both
MixW and MultiPSK fine with ZERO problems on either RX or TX. With HRD/DM780
(version 6.2) the K3
will TX fine (great signal reports), but on RX (with the Audio input set
between 50-60%), I only get about
90% copy even with a solid OLIVIA signal in the waterfall. I have tried all
kinds of SYNC/TUNE Margins
(while using OLIVIA) to no avail. I have also tried all different levels of
audio RX input to no avail.
If someone could share their SignaLink and any K3 LINE-IN/LINE-OUT config
values to get DM780 to work I
would appreciate it. I have been at this for a week (part time) and still can't
get DM780 to work correctly
with my K3.
There is clearly a parameter I am missing, but the documentation for setting up
the soundcard for version
is 6.2 is a tad vague.
73,
Tony L. (KJ5XF)
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to sla...@nullserv.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
