Will,
Several of the critical components of the XV432 are no longer available
through reliable sources forcing it to be discontinued.
I doubt that you will see a re-design in the near future.
73,
Don W3FPR
On 7/31/2018 9:08 AM, WILLIE BABER wrote:
I guess Elecraft suspended the production o
I guess Elecraft suspended the production of its 432 transverter kt...I went
looking to possible purchase one, and it is not listed. Any information as to
whether it will be produced again?
73, Will, wj9b
CWops #1085
CWA Advisor levels II and III
http://cwops.org/
VR2BrettGraham wrote:
> whether you can change the frequency using the FA; and FB; commands
> while transmitting - this is essential.
The K2 cannot do this.
More than that - you can't QSY whilst transmitting.
Pretty sure that most of the digital control side of the K2 goes into
sleep mode
VE7NGR added:
> Regarding software: solutions exist, the big thing to check with the K2 is
> whether you can change the frequency using the FA; and FB; commands while
> transmitting - this is essential.
The K2 cannot do this.
More than that - you can't QSY whilst transmitting.
After years of
Then for satellites you are sadly stuffed. But I guess this is a firmware
issue which could be 'resolved'. I understand why this may be so, anyway I
suggest you band on the door of Eric ever so politely :-)
Simon Brown, HB9DRV
---
www.hb9drv.ch, www.laax.ch
- Original Message -
From:
On Tue, 2005-10-18 at 13:45 +0100, Simon Brown wrote:
> Regarding software: solutions exist, the big thing to check with the K2 is
> whether you can change the frequency using the FA; and FB; commands while
> transmitting - this is essential.
The K2 cannot do this.
__
There are quite a few considerations when working with satellites, here's my
opinion which is a bit terse as my back hurts and I want to get on with some
new code.
Ideally you will have two K2's or a K2 and a good second receiver. Myself I
have the IC-7800 and IC-703 and will never own the K2
I guess this question is too early but will there be any type of
software or hardware interface to put between two K2's or between a 432
and 2m transverter with ONE K2 so that you maybe able to perform
inverting and non inverting on the satellites to allow proper tracking
of two frequencies? Also
To: Doug Shields <[EMAIL PROTECTED]>
To:
Subject: [Elecraft] 432 Transverter availablity?
Date: Wed, 12 Jan 2005 17:44:28 -0500
Hello all,
My curiousity has gotten the better of me and I have to ask. Is
there
any word on when a 432 MHz transverter will be available? I believe that
Hello all,
My curiousity has gotten the better of me and I have to ask. Is there
any word on when a 432 MHz transverter will be available? I believe that I
heard somewhere that they were working on it. Any ideas?
Doug W4DAS
___
Elecraft mailin
10 matches
Mail list logo