Subject: [Elecraft] Finger dimple
I'm in search of a few finger dimples for a project that I am working on. A
google search failed to yield any positive results. Any assistance is
greatly appreciated.
Thanks
I'm in search of a few finger dimples for a project that I am working on. A
google search failed to yield any positive results. Any assistance is
greatly appreciated.
Thanks
Gregg W6IZT
__
Elecraft mailing list
Home: http://mailman.qth.n
Spoken for already.
73
Greg
On Sun, Dec 25, 2011 at 6:10 PM, Greg wrote:
> Hi folks.
>
> While going through some stuff in the shack I came across an unused finger
> dimple that I have no need for. If anyone can use it let me know and I
> will drop it in the mail for you.
>
> 73 and Merry Chr
Hi folks.
While going through some stuff in the shack I came across an unused finger
dimple that I have no need for. If anyone can use it let me know and I
will drop it in the mail for you.
73 and Merry Christmas
Greg
AB7R
__
Elecraft m
You can get sticky tape removal solvent at a good office supply store. Little
bottle that takes the sticky stuff right off.
Then, I would use a blob of hot glue, which is not permanent to stick it back
on.
Lee Buller - K0WA
In our day and age it seems that Common Sense is in short supply.
David,
Not sure about some of it, but WD-40 does "loosen" many adhesives
and will probably work on that one. Also, most adhesives of this type
can be removed by rubbing them off just using your finger.
As to the rest, I have no clue!
Regards,
kurtt
Kurt Pawlikowski, AKA WB9F
Hi All I My finger Dimple on the k2 come off on me
during field day and the little double sided adhesive
strip folded up.
So. How can I Get that off without tearing up or
defacing the knob?
And where can I locate the double side stuff that was
used to begin with. I do not wish to "super" Glue it
b
Very Witty! The thought then struck me! I have about 3 old rigs (Yausu
etc) that I deemed not worth enough to sell that had pretty nice tuning knobs
on
them. I pulled a couple and found to my delight that not just one, but two
had very nice knobs - counterweighted and "dimpled" - that fit
>Good evening Elecrafters,
>I have for sale a very nice finger dimple...for $1150.00!
>Attached and included with this finger dimple are the following:
>K2 #755
>K160RX
>KSB2
>KNB2
>KPA100
>KAT100-1
>This K2 has been updated to the current K2 configuration regarding
>Firmware levels, K2 Keyin
Good evening Elecrafters,
I have for sale a very nice finger dimple...for $1150.00!
Attached and included with this finger dimple are the following:
K2 #755
K160RX
KSB2
KNB2
KPA100
KAT100-1
This K2 has been updated to the current K2 configuration regarding
Firmware levels, K2 Keying Bandwidth
10 matches
Mail list logo