I get this error when transmitting. Happens on all bands into a dummy load.
It was transmitting fine last night. BTW thanks to all who helped me on the
KAT3 tuning question.
Regards,
Tedd K6OI
___
Elecraft mailing list
Post to: Elecraft@mailman.
Made a couple SSB QSOs prior to the start of WPX and one QSO in the contest
itself, but now am getting ERR TXF anytime I try to key the rig. Also, not
getting any power out to speak of. the pre contest QSOs were LP, the first
contest QSO QRP.
Checked all the settings, both directly and with the ut
Having a senior moment,
I can't transmit. Keep getting an error message."ERR TXF". I corrected this
when I first got the K3. But can't remember what I did.
Thanks
Don..w2xb
--
View this message in context:
http://n2.nabble.com/K3-ERR-TXF-MESSAGE-tp666938p666938.html
Sent from the Elecraft mai
Theodore Wong wrote:
>
> I get this error when transmitting. Happens on all bands into a dummy
> load. It was transmitting fine last night. BTW thanks to all who helped
> me on the KAT3 tuning question.
>
Check the filter settings CONFIG:FLx BW and CONFIG:FLTX SSB. I got this
after playin
Almost, but not quite. Only the 2.7 or 2.8 filter will work for now as the TX
filter for all modes except for AM, where the 6 kHz filter is used.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
K3#0009
On Wed Jan 30 0:58 , G4ILO sent:
>
>
>Theodore Wong wrote:
>>
>> I get
Julius,
ERR TXF indicates that the wrong filter is selected for SSB. It must be
the 2.7 or 2.8 kHz filter.
You can check usijng K3 Utility or directly with the K2 menu.
73,
Don W3FPR
On 3/23/2012 8:59 PM, Julius Fazekas n2wn wrote:
> Made a couple SSB QSOs prior to the start of WPX and one QSO
I've done that already Don. I've checked it via CONFIG and the Utility.
The correct filter is selected, all the settings are correct. It was working
fine, then this error popped up.
Apparently the filter is fine, as it works on RX.
73,
Julius
n2wn
-
Julius Fazekas
N2WN
Tennessee Contest
I'd like to thank Dale, at Elecraft, for helping me work through this
problem. Possibly the steps we went through may help someone who runs into a
similar problem. Items in quotes are my thoughts/explanations. This is a
first time issue for me, and I would consider it quite a rare occurrence
based
Julius,
I'm sure you mean an 807. 813s are non-alcoholic.
Monty K2DLJ
> 7) Save to new working configuration. 8) Test again, heck if only for peace
> of mind. If good, pop open an 813 and do a little jig (wired jig
> preferred... hihi) )
>
> 73,
> Julius
>
> -
> Julius Fazekas
> N2WN
___
Think mine fermented after sitting on the shelf for 40 years
-
Julius Fazekas
N2WN
Tennessee Contest Group
http://www.k4ro.net/tcg/index.html
Tennessee QSO Party
http://www.tnqp.org/
Elecraft K2#4455
Elecraft K3/100 #366
Elecraft K3/100
--
View this message in context:
http://ele
Hi-
On SB the rig works correctly. On FM and AM when I trigger the VOX I get the
"ERR TXF" message.
I have a K3 with 12, 2.7, 500, 200 filters beginning at slot 1.
CW, Data, AM and SSB modes are set for "FLTX FL2"; FM is set for "FLTX FL1".
FL1 is set to "ON" for FM; FL2, 3 and 4 are on for ot
...On FM and AM when I trigger the VOX I get the "ERR TXF" message.
I have a K3 with 12, 2.7, 500, 200 filters beginning at slot 1.
The FM filter in slot 1 must be set to 13.0.
I am uncertain if AM Tx is supported with any filter other than 6 kHz at
the moment.
73,
Lyle kK7P
_
12 matches
Mail list logo