Re: [K3] [Elecraft] Loud audio blast on power up

inal Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Dick Dievendorff Sent: Tuesday, November 25, 2008 12:47 PM To: 'Chuck - AE4CW'; elecraft@mailman.qth.net Subject: RE: [K3] [Elecraft] Loud audio blast on power up You can also load data tables (along with all t

RE: [K3] [Elecraft] Loud audio blast on power up

t: Tuesday, November 25, 2008 12:47 PM To: 'Chuck - AE4CW'; elecraft@mailman.qth.net Subject: RE: [K3] [Elecraft] Loud audio blast on power up You can also load data tables (along with all the other firmware, a complete refresh) by clicking "Send All Firmware to K3" on the Fir

RE: [K3] [Elecraft] Loud audio blast on power up

lto:[EMAIL PROTECTED] On Behalf Of Chuck - AE4CW Sent: Tuesday, November 25, 2008 9:24 AM To: elecraft@mailman.qth.net Subject: Re: [K3] [Elecraft] Loud audio blast on power up Shep, sorry for the late reply; I've been traveling. In the K3 Utility under View, check Advanced Mode. This will disp

Re: [K3] [Elecraft] Loud audio blast on power up

Shep, sorry for the late reply; I've been traveling. In the K3 Utility under View, check Advanced Mode. This will display a check box labeled *Always load DSP data tables*. Also, be sure to check all the appropriate boxes for loading the Firmware modules. This is the solution Gary provided bac

RE: [K3] [Elecraft] Loud audio blast on power up

: elecraft@mailman.qth.net Subject: Re: [K3] [Elecraft] Loud audio blast on power up Chuck- I have the same problem. It started with V2.57. How do I reload "data tables" ? Thanks Shep - W2BSB Elecraft web page: http://www.elecraft.com ___ E

Re: [K3] [Elecraft] Loud audio blast on power up

Chuck- I have the same problem. It started with V2.57. How do I reload "data tables" ? Thanks Shep - W2BSB Chuck - AE4CW wrote: > > I had this problem long ago; a reload of the firmware AND the data tables > cured it. The trick was the data tables. Thanks to Gary at Elecraft. > > Chuck, AE

Re: [K3] [Elecraft] Loud audio blast on power up

Chuck - AE4CW wrote: > > I had this problem long ago; a reload of the firmware AND the data tables > cured it. The trick was the data tables. Thanks to Gary at Elecraft. > > Chuck, AE4CW > > > Monty Shultes wrote: >> >> Mike - >> >> I have a similar phenomenon, but it's a "soft blast", a

Re: [K3] [Elecraft] Loud audio blast on power up

I had this problem long ago; a reload of the firmware AND the data tables cured it. The trick was the data tables. Thanks to Gary at Elecraft. Chuck, AE4CW Monty Shultes wrote: > > Mike - > > I have a similar phenomenon, but it's a "soft blast", a burst of low audio > as the radio turns on