Dear John,
SIEMIC InfoTech (China) Ltd can do IP testing in Beijing, China (
www.siemic.com.cn).
Pls bear in mind, most of IP products are NOT able to get China MII approvals
at this time, i.e. China MII (ministry of Information Industry) has not fully
acceptance of IP products for two reasons
I have just a bit of personal experience in testing implantable pacemakers and
volumetric infusion pumps. I had been doing RF immunity studies for a
manufacturer, circa 1990, using an FDA standard (MDS-401-xxx?) for medical
electronic devices.
I exposed devices to fields as strong as I could cr
The standards EN 50061 /EN 45502-2-1 are dealing with the immunity of pace
makers.
Immunity is tested in a torso simulator and a specific antenna to transmit
close to water at the right frequency.
The problem is not the pacemaker itself, it is the fact that the sensors
provide a good antenna.
B
I am no expert in this subject, and some of what I am about to say is hearsay,
but here it is for what it's worth.
Safety levels are generally based not on field strength, but on power density.
However, these levels are set for the power absorption of the body (in W/kg)
based on the heating effec
Duncan,
You are on the right track by doing all the board-level tests up front. Your
customer will have to integrate the blade into their ATCA application and get
the entire system NEBS certified and approved by the end-customer (Verizon,
SBC, AT&T, etc.). I would also recommend that you don't ove
Hi Pat - You might be interested in a presentation on this
very subject (albeit using a GTEM) that was presented at
one of our EMC Society meetings last year.
Go to http://www.ieee.org/rmcemc and click on archives.
Look for the May 20th 2003 link and download the paper
titled : Prediction not Cor
I don't know what the standards call for but it is quite possible for a person
to be subjected to an E-field exceeding 500 V/m very near to an amateur radio
station. This is the field at my operating position when I am transmitting at
1.8 MHz. A cell phone held close to the body will cause a field,
Hello Duncan,
Although I don't have an answer, you might also want to post this at the
NEBS WEB Group. It is located at:
http://groups.yahoo.com/group/nebsweb
Somebody there may be able to assist you as they all deal with NEBS issues.
This was formally the NEBS Forum on IEEE but was migrated to
Group,
One division of our company is looking to design an ATCA card that is
designed to be installed in telco applications, although not directly
connected to a telco network. The card is to be sold as a single card
for systems integrators and therefore requires a chassis or frame to be
able to w
In article <20041119055032.90761.qm...@web14826.mail.yahoo.com>, peter
merguerian writes
>John,
>
>
>TUV Rheinland China can do the testing.
>
>http://www.tuv.com/en/index.php
>
>
>
Thank you. I have forwarded your message to my colleague.
--
Regards, John Woodgate, OOO - Own Opinions Only
David,
See answers in body of your message.
David Heald wrote:
Greetings all,
I wanted to run this by everyone to see if there is some consensus out there
(not that it would matter if we're all wrong anyway, but...)
We know of the following countries that require special markings for power
s
John,
TUV Rheinland China can do the testing.
http://www.tuv.com/en/index.php
John Woodgate wrote:
A colleague of mine would be grateful for information on a lab that can
do IP testing ... in China.
--
Regards, John Woodgate, OOO - Own Opinions Only.
The good news is that nothing i
12 matches
Mail list logo