If I remember correctly the commands in HP Basic for Local or Remote
mode are LOCAL and REMOTE.
Also there are some slight variations between the 856x analyzers and the
859x analyzers. Your best bet is to look for the programming commands
>from Agilents web site. They can be difficult to find, b
are you sure that the term that you are reading into is dimensioned
large enough to accept the data coming from the analyzer?
--
Duane R. Bagdons
President
du...@icsi-us.com
International Certification Services, Inc.
1100 Falcon Ave
Glencoe, MN 55336
Tele: 1-320-864-
Fax: 1-320-864-6611
www
Mike,
Have you checked to make sure the address is the same? Address 18 is hardcoded
in your program. I know the 8566 is always at 18. I think 18 may be the
default for the 859x series, but you may need to double check.
I use the MKA?; command with the 8594, it should be common with the entire
Here is a question for the older generationas a deviation from all these
questions about standards.
HP362 computer running HP BASIC
I needed to knock together a routine to drive an oscillator and spectrum
analyser and thought this would be a simple way to do things.
Anyhow, I find that whilst
4 matches
Mail list logo