just tried, result: http://static.mah.priv.at/public/hm2log.txt
I guess I'll wait until PCW recovers from the snake bite ;)
- Michael
Am 08.04.2014 um 07:53 schrieb Michael Haberler :
> Andy,
>
> Am 08.04.2014 um 01:46 schrieb andy pugh :
>
>> I have pushed what I believe to be a fix for thi
Andy,
Am 08.04.2014 um 01:46 schrieb andy pugh :
> I have pushed what I believe to be a fix for this issue to the 2.6 branch.
thanks for this patch!
just to make sure I understand this right, since I have this issue:
my config line used to read:
loadrt hm2_pci config="firmware=hm2/5i20/SVST
On 2014-04-08 00:00, Matt Shaver wrote:
> On Mon, 07 Apr 2014 22:30:03 +0200
> Marius Liebenberg wrote:
>
>> You have to look at the [TRAJ] section of the ini file and change the
>> entry MAX_LINEAR_VELOCITY = xxx to MAX_VELOCITY = xxx
> THANKS! This fixed the screen artifact problem!
>> Did you
On Monday 07 April 2014 23:23:40 L Mars did opine:
>
>> Hello,
>> I'm wondering if someone on this list has experience using LinuxCNC with
>> Cincinnati Milacron T3 arms?
>> The arm is, specifically, a Cincinnati Milacron T3-426 Industrial Robot.
>> The existing controller is not easy to interface
On Monday 07 April 2014 23:23:40 L Mars did opine:
>
>> Hello,
>> I'm wondering if someone on this list has experience using LinuxCNC with
>> Cincinnati Milacron T3 arms?
>> The arm is, specifically, a Cincinnati Milacron T3-426 Industrial Robot.
>> The existing controller is not easy to interface
On 04/07/2014 10:10 PM, L Mars wrote:
> Hello,
> I'm wondering if someone on this list has experience using LinuxCNC with
> Cincinnati Milacron T3 arms?
> The arm is, specifically, a Cincinnati Milacron T3-426 Industrial Robot.
> The existing controller is not easy to interface with - its main data
Describe the machine geometrically then write forward and inverse
kinematics.
This will allow you to program motion using gcode.
On Apr 7, 2014 10:18 PM, "L Mars" wrote:
> Hello,
> I'm wondering if someone on this list has experience using LinuxCNC with
> Cincinnati Milacron T3 arms?
> The arm is
On Monday 07 April 2014 23:23:40 L Mars did opine:
> Hello,
> I'm wondering if someone on this list has experience using LinuxCNC with
> Cincinnati Milacron T3 arms?
> The arm is, specifically, a Cincinnati Milacron T3-426 Industrial Robot.
> The existing controller is not easy to interface with -
Hello,
I'm wondering if someone on this list has experience using LinuxCNC with
Cincinnati Milacron T3 arms?
The arm is, specifically, a Cincinnati Milacron T3-426 Industrial Robot.
The existing controller is not easy to interface with - its main data port
is a tape drive connector; thus my interes
I'll file a bug report, sure, if you think it's a bug... I usually assume
operator error so I don't start with bug reports. :D
On Mon, Apr 7, 2014 at 3:29 PM, Michael Haberler wrote:
>
> Am 07.04.2014 um 19:46 schrieb Rod Fitzsimmons Frey :
>
> > Thanks Michael. That fixed things, with no appar
I have pushed what I believe to be a fix for this issue to the 2.6 branch.
--
atp
If you can't fix it, you don't own it.
http://www.ifixit.com/Manifesto
--
Put Bad Developers to Shame
Dominate Development with Jenkins C
On Mon, 07 Apr 2014 22:30:03 +0200
Marius Liebenberg wrote:
> You have to look at the [TRAJ] section of the ini file and change the
> entry MAX_LINEAR_VELOCITY = xxx to MAX_VELOCITY = xxx
THANKS! This fixed the screen artifact problem!
>
> Did you have a look at the wiki for Gmoccapy regarding
Matt
You have to look at the [TRAJ] section of the ini file and change the
entry MAX_LINEAR_VELOCITY = xxx to MAX_VELOCITY = xxx
Did you have a look at the wiki for Gmoccapy regarding the soft Limit? I
cannot help with that as I have not tested it yet but if it is not in
the wiki, Norbert will
I'm working with gmoccapy and there is a _long_ number displayed in the
"Tool information" area of the screen. See: http://imagebin.org/304304
Anyone have an idea of what this could be? It doesn't happen when I run
sim/gmoccapy, so it must be something in my configuration, but I'd love
a clue :)
Hi,
An FYI about the 2GB eMMC on the BBB. It looks like some future version will
have a 4GB eMMC. The following is from the beagleboene black page:
http://elinux.org/Beagleboard:BeagleBoneBlack#Revision_C_.28Pending.29
=
Am 07.04.2014 um 19:46 schrieb Rod Fitzsimmons Frey :
> Thanks Michael. That fixed things, with no apparent ill effects on
> positioning, etc.
hm, I would still like to understand the causality here.
I am fairly sure it has to do with the way the interpreter deals with a
queuebuster (which is
I'm using M73, what do you consider a queue buster ? I want to make sure I
don't have this issue..
On 04/07/2014 01:46 PM, Rod Fitzsimmons Frey wrote:
> Thanks Michael. That fixed things, with no apparent ill effects on
> positioning, etc.
>
>
> On Mon, Apr 7, 2014 at 1:19 PM, Michael Haberler w
Thanks Michael. That fixed things, with no apparent ill effects on
positioning, etc.
On Mon, Apr 7, 2014 at 1:19 PM, Michael Haberler wrote:
>
> Am 07.04.2014 um 19:06 schrieb Rod Fitzsimmons Frey :
>
> > Thanks Michael. Here's the relevant files
> >
> > https://gist.github.com/rodfrey/1002420
Am 07.04.2014 um 19:06 schrieb Rod Fitzsimmons Frey :
> Thanks Michael. Here's the relevant files
>
> https://gist.github.com/rodfrey/10024205
My gut feeling is - some odd interaction between the M73 and the fact that you
do a queuebuster here
would you try and remove the M73 and see if the e
Thanks Michael. Here's the relevant files
https://gist.github.com/rodfrey/10024205
It works well until I exceed 1200mm/min on any section of my program.
On Mon, Apr 7, 2014 at 12:52 PM, Michael Haberler wrote:
>
> Am 07.04.2014 um 17:52 schrieb Rod Fitzsimmons Frey :
>
> > Hi! I'm having som
Am 07.04.2014 um 17:52 schrieb Rod Fitzsimmons Frey :
> Hi! I'm having some issues with remapping M6 when I up my feed rates. My
> program works great at 750mm/min, but when I up it to 2000mm/min I get this
> error:
>
> M7x: restore_settings failed executing: ' F2000.0': Queue is not empty
> a
Hi! I'm having some issues with remapping M6 when I up my feed rates. My
program works great at 750mm/min, but when I up it to 2000mm/min I get this
error:
M7x: restore_settings failed executing: ' F2000.0': Queue is not empty
after tool change
It will happen a few hundred commands into the pat
On Monday 07 April 2014 05:36:49 Peter Blodow did opine:
> Am 04.04.2014 14:46, schrieb Gene Heskett:
> > yeah, and I've been looking for the any key for 30 years. Haven't
> > found a new keyboard with one of them yet. Cheers, Gene
>
> Gene,
> The Any Key is on the PC case outside, right beside t
Am 04.04.2014 14:46, schrieb Gene Heskett:
> yeah, and I've been looking for the any key for 30 years. Haven't
> found a new keyboard with one of them yet. Cheers, Gene
Gene,
The Any Key is on the PC case outside, right beside the small red lamp,
sometimes labelled "R". Pressing will always brin
24 matches
Mail list logo