> I can't get the hal file right to run a stepper tripod. If someone could
> share one that runs on wheezy I would be most appreciative. I was thinking
> I could build a 3d printer with this.
You get something up and running. What works? And what does not work?
>
You use halshow or watch tab on hal configuration to check all signals behave
as expected?
On Thu, 27 Jul 2017 06:08:50 -0700
Charles Brauer wrote:
> What I did, was ran emc stepper_inch_parallel_port. Then edited the
> core_hal file like this:
>
> # core HAL config
Anyone need a tapping head?
https://mesaus.com/index.php?route=product/product=74_78_id=140
JT
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org!
On 27 July 2017 at 14:08, Charles Brauer wrote:
> What happened, when I ran EMC, it loaded and when I jogged the x-axis the
> x-motor ran, but not the y-motor. I would expect they would both run
> together. Same with the y-axis, just the y-motor. I don't have the
And the last question is if I compile this code on my fast computer,
running under VMware Workstation, will I be able to transfer an iso file to
another computer and install it or just use the resultant hal file?
--
Check
I guess what I could do is get on "github" and get the files and compile it
using: ./configure --enable-run-in-place. (I didn't want to do all this
work...) This would hopefully give me the hal files I want. (me wanting the
softer way). This caused me to take a look at Machineket, which I don't
What I did, was ran emc stepper_inch_parallel_port. Then edited the
core_hal file like this:
# core HAL config file for steppers
# first load the core RT modules that will be needed
# kinematics
#I changed this-
#load trivkins
loadrt tripodkins
setp tripodkins.Bx 25.1250
setp tripodkins.Cx
https://www.youtube.com/watch?v=YnABuOOoi5w
https://www.youtube.com/watch?v=YCaAXpDC7Ag
> On 27. Jul 2017, at 04:25, Ken Johnson wrote:
>
> Thanks Andy, that helped a great deal, particularly the two formula's
> referring to the angle klm. If I make (Rmajor-r) the crank
Response received via Forum, thank you.
On 7/26/2017 10:48 AM, emc-users-requ...@lists.sourceforge.net wrote:
Send Emc-users mailing list submissions to
emc-users@lists.sourceforge.net
To subscribe or unsubscribe via the World Wide Web, visit