Re: [Emc-users] Blown BOB and ???

that looks crispy... On Mon, May 2, 2022 at 2:25 PM Alan Condit wrote: > Andy, Chris, Dave and Jon, > > Here is a link to the photo . > I guess it was too big to post directly. > > Alan > > > On Mon, May 2, 2022 at 11:18 AM Alan Condit wrote: > > >

Re: [Emc-users] Blown BOB and ???

Andy, Chris, Dave and Jon, Here is a link to the photo . I guess it was too big to post directly. Alan On Mon, May 2, 2022 at 11:18 AM Alan Condit wrote: > Chris, Andy, and Dave, > > I guess I didn’t give enough info. I built this controller in

Re: [Emc-users] Blown BOB and ???

Chris, Andy, and Dave, I guess I didn’t give enough info. I built this controller in 2005 for my lathe. I used it on my lathe until a couple of years ago when I added another drive and switched this controller over to my PCBmill and X2 Mini mill. I built a new controller for my lathe using a

Re: [Emc-users] Emc-users Digest, Vol 193, Issue 2

The Mesa converter does appear to be just an adaptor Im in South Africa, i think the shipping would not make it worth while, but the offer is very kind, thank you. It may even be less expensive to just buy the adaptors from mesa, then agin you would need 3 of them... Not sure if the firmware for

Re: [Emc-users] Connecting Mesa 25 pin daughtercards to 50 pin FPGA card??

On Mon, 2 May 2022, hdpre...@gmail.com wrote: Date: Mon, 2 May 2022 06:32:41 +0200 From: hdpre...@gmail.com Reply-To: "Enhanced Machine Controller (EMC)" To: emc-users@lists.sourceforge.net Subject: [Emc-users] Connecting Mesa 25 pin daughtercards to 50 pin FPGA card?? HI Is this

Re: [Emc-users] Connecting Mesa 25 pin daughtercards to 50 pin FPGA card??

On Mon, 2 May 2022 at 05:37, wrote: > > HI > Is this possible? > For example, can I connect a 7i77 + 7i74 to a 7i80HD using a special cable? Do you already have the daughter cards? ie it is too late to swap to 7i33TA and 7i44 ? Both are relatively cheap and in stock. I think that it is

Re: [Emc-users] Connecting Mesa 25 pin daughtercards to 50 pin FPGA card??

Hi Le lun. 2 mai 2022 à 06:36, a écrit : > HI > Is this possible? > This may be helpful http://store.mesanet.com/index.php?route=product/product_id=285 ... If you can get one ! TY J ___ Emc-users mailing list Emc-users@lists.sourceforge.net