Hi Matthieu
My next suggestion would have been to see if the port works but you have
done that now.
I suggest that you email Peter Wallace at Mesa directly. He might be
able to help better.
On 2014-02-10 08:36, Matthieu Patou wrote:
> Hi Marius,
>
> On 02/09/2014 08:46 PM, Marius Liebenberg wrot
Hi Marius,
On 02/09/2014 08:46 PM, Marius Liebenberg wrote:
> Mattieu
>
> Chris did confirm that there is a bug when you dont use the default
> port. What happens if you use this line
>
> loadrt hm2_7i43 config="ioaddr=0x3bc firmware=hm2/7i43-2/SVST4_4.BIT
> num_encoders=0 num_pwmgens=0 num_3pwmge
Mattieu
Chris did confirm that there is a bug when you dont use the default
port. What happens if you use this line
loadrt hm2_7i43 config="ioaddr=0x3bc firmware=hm2/7i43-2/SVST4_4.BIT
num_encoders=0 num_pwmgens=0 num_3pwmgens=0 num_stepgens=3 "
Also, you must make sure that the parallel port
Marius,
Well I have only one parallel port in this laptop and I want that the
7i43 that is connected to it to the port at the address 0x3BC.
When I connect the same 7i43 to an atom based workstation it works well
because the address of the port is 0x378.
Matthieu.
On 02/09/2014 12:32 AM, Mar
If it is the case then it's confirmed that PNCConf has a bug because it
should generate this kind of configuration when a non default address is
specified for the parallel port.
Matthieu.
Yes this is a confirmed bug.
https://sourceforge.net/p/emc/bugs/358/
Thanks
Chris M
Matthieu
The HAL file is correct. The PNCCONF utility will load the Mesa card
drivers as it does.
What you are wanting to do is load an extra parallel port. This is not
the same as the 7i43 card but rather a parport. You should add to your
HAL file the following stuff.
Have a look at this fir
Hi Marius,
See the attached file, I don't see anything related to loading the
parport driver.
It seems that the hm2_7i43 module is trying to use the default address.
I get this on the dmesg
hm2_7i43.0: board at (ioaddr=0x0378, ioaddr_hi=0x0778, epp_wide ON) not
found!
I suspect that I shou
> Date: Wed, 5 Feb 2014 00:10:15 -0800
> From: m...@matws.net
> To: emc-users@lists.sourceforge.net
> Subject: [Emc-users] Address in of parrallel port not used in PNCCONF ?
>
> Hello All,
>
> I have an atom desktop with a partport at 0x378 and a 7i43 + 7i42 hooked
See if the address that is used when the parport driver is loaded in the
HAL file is what you expected it to be. You can also post you HAL file
here so we can have look at that for you.
On 2014-02-05 10:10, Matthieu Patou wrote:
> Hello All,
>
> I have an atom desktop with a partport at 0x378 a
Also, PNCCONF might not have loaded the parport driver that you should use.
On 2014-02-05 10:10, Matthieu Patou wrote:
> Hello All,
>
> I have an atom desktop with a partport at 0x378 and a 7i43 + 7i42 hooked
> to it and it's working well with LinuxCNC 2.5.3.
> On a thinkpad laptop I have a PCMCIA
Hello All,
I have an atom desktop with a partport at 0x378 and a 7i43 + 7i42 hooked
to it and it's working well with LinuxCNC 2.5.3.
On a thinkpad laptop I have a PCMCIA parport card at 0x3bc and when I
try to run Axis, after configuring this laptop for the same card, I got
errors about missing
11 matches
Mail list logo
