On Thu, Oct 13, 2011 at 07:09:33AM +1100, Frank Tkalcevic wrote:
> I am setting up a gantry system with 4 axis. I have X,Y and Z set to home,
> but my A doesn't have a home switch, so I set the home sequence to -1.
I made that mistake too. What you want to do is set the HOME_SEQUENCE=0
but don't
On 12 October 2011 21:09, Frank Tkalcevic wrote:
> Is there any .INI file setting that would automatically mark the axis as
> homed?
I _think_ you just need to set the home search velocity to zero.
--
atp
"Torque wrenches are for the obedience of fools and the guidance of wise men"
--
I am setting up a gantry system with 4 axis. I have X,Y and Z set to home,
but my A doesn't have a home switch, so I set the home sequence to -1.
The issue (minor issue) is that I can't switch from joint mode to world mode
unless all axis are homed. I have to manually go to through the menus and
