Correct my current setup is Mesa 5i25, 7i76, THCAD and Gecko 203v's with
Nema 23 triple stack steppers.
JT
On 9/6/2013 9:34 AM, Marius Liebenberg wrote:
> John
> I take it that you used the Mesa THCAD with your current THC comp?
>
> On 2013/09/06 12:55 PM, John Thornton wrote:
>> Yes, I built my
John
I take it that you used the Mesa THCAD with your current THC comp?
On 2013/09/06 12:55 PM, John Thornton wrote:
> Yes, I built my own plasma table.
>
> http://s47.photobucket.com/user/johnplctech/library/Plasma%20Cutter?sort=3&page=1
>
> In these videos I didn't have a THC
> http://www.youtub
Yes, I built my own plasma table.
http://s47.photobucket.com/user/johnplctech/library/Plasma%20Cutter?sort=3&page=1
In these videos I didn't have a THC
http://www.youtube.com/watch?v=e70jdiDm7yc
http://www.youtube.com/watch?v=knf3cPrZPrk
http://www.youtube.com/watch?v=3o84BzF90JM
http://www.youtu
On Thu, 9/5/13, Jack Coats wrote:
Subject: [Emc-users] Plasma Table
To: "Enhanced Machine Controller (EMC)"
Date: Thursday, September 5, 2013, 8:47 PM
Has anyone done a DIY plasma table,
or have suggestions I could find
out about a DIY version?
I am a rookie and jus
2013/9/6 Marius Liebenberg
> Jack
> In this case Google is your friend. There are literally thousands of
> ideas from guys who have done their own thing. Two things I recommend
> that you don't do without.
> 1: You must fit a THC of sorts. Especially if you are going to cut
> thinner materials.
>
Jack
In this case Google is your friend. There are literally thousands of
ideas from guys who have done their own thing. Two things I recommend
that you don't do without.
1: You must fit a THC of sorts. Especially if you are going to cut
thinner materials.
2: You must fit a water bed for your ow
Has anyone done a DIY plasma table, or have suggestions I could find
out about a DIY version?
I am a rookie and just learning, wanting to find out if it could be
practical for a hobby setup.
TIA, Jack
--
Learn the latest
Viesturs;
On 2013-02-19, at 2:35 PM, Viesturs Lācis wrote:
> Since I posted lots of questions on this list about the plasma table I
> was building, I thought that I should share something:
> http://www.youtube.com/watch?v=OK0hldTjnX0
Interesting! Thanks for posting the video.
(have no experie
Hello!
Since I posted lots of questions on this list about the plasma table I
was building, I thought that I should share something:
http://www.youtube.com/watch?v=OK0hldTjnX0
I took that video with my phone.
I was not able to get the servos work correctly, so I ended up with
stepper motors, whic
