Greetings; fresh thread.
I downloaded a tarball from psha.orh.ru, containing 0.2.0.7 sources
Unpacking it into a ~/src/camview-emc directory,
"./configure --with-v4l2-plugin --with-v4l-plugin"
appeared to work, but despite having v4l2.dev stuff installed,
make exits a minute or so later with
On Wednesday 20 January 2016 09:44:27 Gene Heskett wrote:
Update: ssh'd into the GO704 machine, I put a copy of the tarballs
contents in ~/linuxcnc/src directory. Configure failed, no libv4l2
stuffs. Had synaptic install the -dev version.
No clue if it will work, but
./configure --with-v4l2-p
On Wednesday 20 January 2016 10:34:40 Gene Heskett wrote:
Second update:
Now linuxcnc runs again, but shows a white screen and none of the halui
buttons, just the blank window.
And on the screen that I launch it from a snapshot.png is attached.
Taken with this same camera :)
The invalid opti
On Wednesday 20 January 2016 12:22:24 Gene Heskett wrote:
Third update:
Nothing I can do will make it build the docs, in either .html or .pdf
format, and no errors are being reported even if I run the Makefile in
any of the three docs subdirs. The Makefiles are being updated when I
rerun ./co
On Wednesday 20 January 2016 13:03:01 Gene Heskett wrote:
> On Wednesday 20 January 2016 12:22:24 Gene Heskett wrote:
>
> Third update:
>
> Nothing I can do will make it build the docs, in either .html or .pdf
> format, and no errors are being reported even if I run the Makefile in
> any of the th