Andrey Chernov a...@freebsd.org wrote
in 50a88d0e.1070...@freebsd.org:
ac On every IPv6 address of my card and router and every broadcast and
ac link-local scope addresses I see now:
ac kernel: sa6_recoverscope: assumption failure (non 0 ID): ipv6 address
ac
ac What does it mean and why there
TB --- 2012-11-19 07:12:07 - tinderbox 2.9 running on freebsd-current.sentex.ca
TB --- 2012-11-19 07:12:07 - FreeBSD freebsd-current.sentex.ca 8.3-PRERELEASE
FreeBSD 8.3-PRERELEASE #0: Mon Mar 26 13:54:12 EDT 2012
d...@freebsd-current.sentex.ca:/usr/obj/usr/src/sys/GENERIC amd64
TB ---
19.11.2012 10:24, Alex Keda wrote:
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: WDC WD1600BEVT-00A0RT0 01.01A01 ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 152627MB (312581809 512 byte sectors: 16H 63S/T 16383C)
19.11.2012 10:59, Volodymyr Kostyrko wrote:
19.11.2012 10:24, Alex Keda wrote:
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: WDC WD1600BEVT-00A0RT0 01.01A01 ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 152627MB
19.11.2012 13:19, Volodymyr Kostyrko пишет:
19.11.2012 10:59, Volodymyr Kostyrko wrote:
19.11.2012 10:24, Alex Keda wrote:
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: WDC WD1600BEVT-00A0RT0 01.01A01 ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
On 19.11.2012 11:59, Hiroki Sato wrote:
This warning message itself is not harmful actually, but my commit
triggered it. It should be fixed at r243235. Can you let me know if
this problem persists even at this revision or later? Thank you.
I see no such messages after boot at r243235,
on 18/11/2012 13:48 Andriy Gapon said the following:
on 18/11/2012 02:26 Bartosz Stec said the following:
W dniu 2012-11-16 17:17, Guido Falsi pisze:
On 11/16/12 16:45, Andriy Gapon wrote:
Guido, Bartosz,
could you please test the patch?
I have just compiler an r242910 kernel with this
19.11.2012 13:19, Volodymyr Kostyrko пишет:
19.11.2012 10:59, Volodymyr Kostyrko wrote:
19.11.2012 10:24, Alex Keda wrote:
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: WDC WD1600BEVT-00A0RT0 01.01A01 ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
19.11.2012 15:01, Alex Keda wrote:
It's not build
config:
===
root@HP:/usr/src # vim /usr/src/sys/amd64/conf/HP
#
include GENERIC
ident HPKERNEL
nodevice ata
nodevice siis
device atacore
device ataati
device ataahci
Looks like I have missed `device atapci` here.
=
19.11.2012 17:18, Volodymyr Kostyrko пишет:
19.11.2012 15:01, Alex Keda wrote:
It's not build
config:
===
root@HP:/usr/src # vim /usr/src/sys/amd64/conf/HP
#
include GENERIC
ident HPKERNEL
nodevice ata
nodevice siis
device atacore
device ataati
device ataahci
Looks like I
19.11.2012 15:59, Alex Keda wrote:
19.11.2012 17:18, Volodymyr Kostyrko пишет:
19.11.2012 15:01, Alex Keda wrote:
It's not build
config:
===
root@HP:/usr/src # vim /usr/src/sys/amd64/conf/HP
#
include GENERIC
ident HPKERNEL
nodevice ata
nodevice siis
device atacore
device ataati
Ian FREISLICH wrote:
Gleb Smirnoff wrote:
On Sat, Nov 17, 2012 at 05:07:54PM +0200, Ian FREISLICH wrote:
I I have this consistently with:
I
I FreeBSD firewall2.jnb1.gp-online.net 10.0-CURRENT FreeBSD 10.0-CURRENT #
30
r243156: Fri Nov 16 20:12:33 SAST 2012
On Mon, 19 Nov 2012, Alex Keda wrote:
I try update my laptop - Compaq 6715s from 9.0 to 9.1-rc3
it cannot boot, because no HDD found
dmesg from 9.0/9.1 and pciconf in attached files
If there is an IDE/AHCI mode setting in the BIOS, switch it to the other
setting.
On 11/19/12 14:00, Andriy Gapon wrote:
on 18/11/2012 13:48 Andriy Gapon said the following:
on 18/11/2012 02:26 Bartosz Stec said the following:
Thank you both very much for testing!
Committed as r243213.
BTW, if you have some spare time and a desire to do some more testing, you can
try the
on 19/11/2012 17:07 Guido Falsi said the following:
On 11/19/12 14:00, Andriy Gapon wrote:
on 18/11/2012 13:48 Andriy Gapon said the following:
on 18/11/2012 02:26 Bartosz Stec said the following:
Thank you both very much for testing!
Committed as r243213.
BTW, if you have some spare time
On 19.11.2012 18:50, Warren Block wrote:
On Mon, 19 Nov 2012, Alex Keda wrote:
I try update my laptop - Compaq 6715s from 9.0 to 9.1-rc3
it cannot boot, because no HDD found
dmesg from 9.0/9.1 and pciconf in attached files
If there is an IDE/AHCI mode setting in the BIOS, switch it to the
On 18 November 2012 18:44, Mateusz Guzik mjgu...@gmail.com wrote:
Just take user name from id -nu.
While that does provide the $user value I want, id is in /usr/bin/
which may not be mounted.
Is there a builtin which provides similar functionality?
--
Eitan Adler
Eitan Adler lists at eitanadler.com writes:
On 18 November 2012 18:44, Mateusz Guzik mjguzik at gmail.com wrote:
Just take user name from id -nu.
While that does provide the $user value I want, id is in /usr/bin/
which may not be mounted.
/rescue/id
jb
TB --- 2012-11-19 17:30:22 - tinderbox 2.9 running on freebsd-current.sentex.ca
TB --- 2012-11-19 17:30:22 - FreeBSD freebsd-current.sentex.ca 8.3-PRERELEASE
FreeBSD 8.3-PRERELEASE #0: Mon Mar 26 13:54:12 EDT 2012
d...@freebsd-current.sentex.ca:/usr/obj/usr/src/sys/GENERIC amd64
TB ---
On Mon, Nov 19, 2012 at 10:45:35AM -0500, Eitan Adler wrote:
On 18 November 2012 18:44, Mateusz Guzik mjgu...@gmail.com wrote:
Just take user name from id -nu.
While that does provide the $user value I want, id is in /usr/bin/
which may not be mounted.
Is there a builtin which provides
today i was comparing the performance of some netmap-related code
on FreeBSD and Linux (RELENG_9 vs 3.2) and i was surprised to see that
our system calls are significantly slower.
On comparable hardware (i7-2600k vs E5-1650) the syscall
getppid() takes about 95ns on FreeBSD and 38ns on linux.
(i
On Sat, Nov 17, 2012 at 11:20:21AM -0500, Ryan Stone wrote:
My original complaint that /etc/group gets permissions of 0600 is a result
of a bug in libutil, which bapt@ ported pw to use in r242349. The new
group manipulation API using mktemp to create a temporary file, writes the
new group
On Mon, Nov 19, 2012 at 11:28:43PM +0100, Mateusz Guzik wrote:
On Sat, Nov 17, 2012 at 11:20:21AM -0500, Ryan Stone wrote:
My original complaint that /etc/group gets permissions of 0600 is a result
of a bug in libutil, which bapt@ ported pw to use in r242349. The new
group manipulation API
I've been using this layout for a long time in X and I create kbdmap for
syscons.
Does it any chance to be put in source tree? So my question is, is it
worth.
___
freebsd-current@freebsd.org mailing list
On 2012-Nov-20 02:42:50 +0200, mbsd m...@isgroup.com.ua wrote:
I've been using this layout for a long time in X and I create kbdmap for
syscons.
Does it any chance to be put in source tree? So my question is, is it
worth.
I suggest you write a PR that includes the keymap and an appropriate
patch
On 18 November 2012 18:32, Eitan Adler li...@eitanadler.com wrote:
Hey,
at the moment the current default csh prompt looks like
user@hostname:directory% command
This leads to an unexpected[*] result when using su (without -).
In particular the user part is *not* changed to root (or toor
Forward notice:
I sent this to freebsd-pf originally and did not CC -current, but as the
issue would affect current and the more opinions the better... I have sent
it here too.
-- Cheers, daemon
-- original message
Good day all,
I am aware this is a much discussed subject since the
On Mon, Nov 19, 2012 at 11:37:45PM +0100, Baptiste Daroussin wrote:
On Mon, Nov 19, 2012 at 11:28:43PM +0100, Mateusz Guzik wrote:
On Sat, Nov 17, 2012 at 11:20:21AM -0500, Ryan Stone wrote:
My original complaint that /etc/group gets permissions of 0600 is a result
of a bug in libutil,
28 matches
Mail list logo