On Wed, Sep 19, 2007 at 03:24:16PM -0400, Lowell Gilbert wrote:
Crist J. Clark [EMAIL PROTECTED] writes:
On Fri, Sep 14, 2007 at 07:35:24AM -0400, Lowell Gilbert wrote:
Crist J. Clark [EMAIL PROTECTED] writes:
Looking at the dmesg(1) from the last boot,
# fgrep cd0
Crist J. Clark [EMAIL PROTECTED] writes:
On Fri, Sep 14, 2007 at 07:35:24AM -0400, Lowell Gilbert wrote:
Crist J. Clark [EMAIL PROTECTED] writes:
Looking at the dmesg(1) from the last boot,
# fgrep cd0 /var/run/dmesg.boot
acd0: CDROM CRD-8400B/1.06 at ata1-master UDMA33
Makes
On Fri, Sep 14, 2007 at 07:35:24AM -0400, Lowell Gilbert wrote:
Crist J. Clark [EMAIL PROTECTED] writes:
Looking at the dmesg(1) from the last boot,
# fgrep cd0 /var/run/dmesg.boot
acd0: CDROM CRD-8400B/1.06 at ata1-master UDMA33
Makes me think the system is not recognizing the
Crist J. Clark wrote:
On Thu, Sep 13, 2007 at 03:15:10PM -0700, Predrag Punosevac wrote:
I know where is your problem the burning device is always cd0
Huh? Burncd(8) is explicitly for ATAPI CD-R/RW. From the man page,
DESCRIPTION
The burncd utility is used to burn CD-R/RW
Crist J. Clark [EMAIL PROTECTED] writes:
Looking at the dmesg(1) from the last boot,
# fgrep cd0 /var/run/dmesg.boot
acd0: CDROM CRD-8400B/1.06 at ata1-master UDMA33
Makes me think the system is not recognizing the device as CDRW,
only CDROM.
You're right, and that's the key point to
[reformatted]
On Thursday 13 September 2007 22:21:09 Predrag Punosevac wrote:
Crist J. Clark wrote:
I just tried to burn a CD for the first time in a long time
on a machine. The burncd(8) command worked fine on this machine
in FreeBSD 5.x (or was it 4.x?), but now in 6.2, I get,
#
On Friday 14 September 2007 00:16:46 Predrag Punosevac wrote:
I forgot to tell you assuming that you will do it your self
Just add
link acd0 cd0
but you have to use cd0.
This is very bad advice, please don't ever do that. acd0 and cd0 are quite
different devices under the hood.
(posted for
Crist J. Clark wrote:
I just tried to burn a CD for the first time in a long time
on a machine. The burncd(8) command worked fine on this machine
in FreeBSD 5.x (or was it 4.x?), but now in 6.2, I get,
[snip]
It's unclear to me whether you got a satisfactory answer. Anyway, I run
Mel wrote:
On Friday 14 September 2007 00:16:46 Predrag Punosevac wrote:
I forgot to tell you assuming that you will do it your self
Just add
link acd0 cd0
but you have to use cd0.
This is very bad advice, please don't ever do that. acd0 and cd0 are quite
different devices under the
Make sure you add atapicam into your kernel it is not in generic! I had
the same problem.
/etc/loader.conf atapicam_load=YES
Crist J. Clark wrote:
I just tried to burn a CD for the first time in a long time
on a machine. The burncd(8) command worked fine on this machine
in FreeBSD 5.x (or
On Thu, Sep 13, 2007 at 01:21:09PM -0700, Predrag Punosevac wrote:
Make sure you add atapicam into your kernel it is not in generic! I had
the same problem.
/etc/loader.conf atapicam_load=YES
I did a,
# kldload /boot/kernel/atapicam.ko
And to reinitiallize the drive,
#
I know where is your problem the burning device is always cd0
you must give the device node /dev/cd0
Take care!
Crist J. Clark wrote:
On Thu, Sep 13, 2007 at 01:21:09PM -0700, Predrag Punosevac wrote:
Make sure you add atapicam into your kernel it is not in generic! I had
the
I forgot to tell you assuming that you will do it your self
Just add
link acd0 cd0
but you have to use cd0.
Pedja
Crist J. Clark wrote:
On Thu, Sep 13, 2007 at 01:21:09PM -0700, Predrag Punosevac wrote:
Make sure you add atapicam into your kernel it is not in generic! I had
the same
On Thu, Sep 13, 2007 at 03:15:10PM -0700, Predrag Punosevac wrote:
I know where is your problem the burning device is always cd0
Huh? Burncd(8) is explicitly for ATAPI CD-R/RW. From the man page,
DESCRIPTION
The burncd utility is used to burn CD-R/RW media using the ATAPI cd
On Thu, 13 Sep 2007, Predrag Punosevac wrote:
I know where is your problem the burning device is always cd0
you must give the device node /dev/cd0
/dev/cd0 is provided by the atapicam kernel module, and used with
Linux-type utilities that need it.
However, burncd is FreeBSD native, and
15 matches
Mail list logo
