On Thu, May 15, 2008 at 9:20 PM, James [EMAIL PROTECTED] wrote:
Hello,
I have a FreeAgent(Seagate) usb drive, that shows up as /medea/sdb1
in Konqueror. I can go thru it via Konqueror and see all of the files
(dll .exe, docs etc) but I cannot cd into the directories and sub
directories and
On Thursday 15 May 2008, Mick wrote:
You'll probably get better results with X by selecting a suitable
process scheduler and configuring your HZ to 1000
Now, this I have noticed making a difference. Not all schedulers are
born the same. I have found that (the current version of) CFQ is
On Thursday 15 May 2008, Mick wrote:
As a matter of interest, I remember reading somewhere that squeezing
1000Hz out of an old machine may have the opposite effect to that
intended. Is this pub talk, or have you experienced something that
confirms this?
No, it's not just pub talk. The trick
Is it possible in packages.mask to mask only release
candidates/alpha/beta versions, while leaving final releases unmasked?
what is the aim of this? To have a stable system? In that case you
should make sure ACCEPT_KEYWORDS in make.conf does NOT have a ~
Then you may get release
Marko Kocić schrieb:
Is it possible in packages.mask to mask only release
candidates/alpha/beta versions, while leaving final releases unmasked?
what is the aim of this? To have a stable system? In that case you
should make sure ACCEPT_KEYWORDS in make.conf does NOT have a ~
Then you
Justin schrieb:
Marko Kocić schrieb:
Is it possible in packages.mask to mask only release
candidates/alpha/beta versions, while leaving final releases unmasked?
what is the aim of this? To have a stable system? In that case you
should make sure ACCEPT_KEYWORDS in make.conf does NOT
In my portage there are only rc for 26. So just add
=sys-kernel/vanilla-sources-2.6.26 to your packages.keywords.
I ment sys-kernel/vanilla-sources-2.6.26!!
Yes, but then I will not be notified by portage that new version (2.6.26 final)
is available. I will have to manually track versions.
Justin schrieb:
Marko Kocić schrieb:
In my portage there are only rc for 26. So just add
=sys-kernel/vanilla-sources-2.6.26 to your packages.keywords.
I ment sys-kernel/vanilla-sources-2.6.26!!
Yes, but then I will not be notified by portage that new version
(2.6.26 final)
is
Marko Kocić schrieb:
In my portage there are only rc for 26. So just add
=sys-kernel/vanilla-sources-2.6.26 to your packages.keywords.
I ment sys-kernel/vanilla-sources-2.6.26!!
Yes, but then I will not be notified by portage that new version (2.6.26 final)
is available. I will
You have to put it in packages.keywords and not mask!
Just add following to /etc/portage/packages.mask
=sys-kernel/vanilla-sources-2.6.26_rc*
=sys-kernel/vanilla-sources-2.6.27_rc*
=sys-kernel/vanilla-sources-2.6.28_rc*
=sys-kernel/vanilla-sources-2.6.29_rc*
On my system it works.
Hello!
I'm trying to join my Gentoo box to Windows 2003 domain and I need some
help.
I've set up smb.conf,. krb5.conf, got a krb ticket, but I'm not able to join
domain:
# net ads join -U [EMAIL PROTECTED] -d2
[2008/05/16 16:13:11, 2] lib/interface.c:add_interface(81)
added interface
On 15 May 2008, at 19:20, James wrote:
...
I have a FreeAgent(Seagate) usb drive, that shows up as /medea/sdb1
in Konqueror. I can go thru it via Konqueror and see all of the files
(dll .exe, docs etc) but I cannot cd into the directories and sub
directories and see any files.
...
What does
On Thu, May 15, 2008 at 11:20 AM, James [EMAIL PROTECTED] wrote:
Hello,
I have a FreeAgent(Seagate) usb drive, that shows up as /medea/sdb1
in Konqueror. I can go thru it via Konqueror and see all of the files
(dll .exe, docs etc) but I cannot cd into the directories and sub
directories and
[EMAIL PROTECTED] writes:
James [EMAIL PROTECTED] writes:
# mount -o bind /dev /mnt/gentoo/dev
[...]
Any of the above steps that are not necessary?
Other have commented about the .../boot stuff but in dozens of times
chrooting during all kinds of install situations I've never done
I was looking at my users and groups on my box, and I realized that
certain services add user accounts with specific UIDs, but then just
gets the next GID for it's corresponding group. I know I, personally,
would like to have the UIDs and GIDs match (and I spent the time with
usermod, groupmod,
Thanks for your exhaustive replies. I've decided to go
for the APC ES-350 for seventy bucks at the local Staples.
been following this page:
http://gentoo-wiki.com/HOWTO_APCUPSD
Kernel seems to have all the right stuff...
[EMAIL PROTECTED] ~ $ emerge -pv apcupsd
These are the packages that
On Fri, 16 May 2008 14:57:24 -0700 (PDT), maxim wexler wrote:
Thanks for your exhaustive replies. I've decided to go
for the APC ES-350 for seventy bucks at the local Staples.
But when I try dialup I get this:
Device ttyS0 is blocked by PID 3981
which turns out is apcupsd. So I have
Stroller stroller at stellar.eclipse.co.uk writes:
On 15 May 2008, at 19:20, James wrote:
...
I have a FreeAgent(Seagate) usb drive, that shows up as /medea/sdb1
in Konqueror. I can go thru it via Konqueror and see all of the files
(dll .exe, docs etc) but I cannot cd into the
On Friday 16 May 2008, King Spook wrote:
I was looking at my users and groups on my box, and I realized that
certain services add user accounts with specific UIDs, but then just
gets the next GID for it's corresponding group. I know I,
personally, would like to have the UIDs and GIDs match
Mark Knecht markknecht at gmail.com writes:
I have multiple external USB drives that I use with this kernel.
However I do have a couple that don't seem to work so well. My clue is
to look at dmesg with the drive attached and then again after the
drive is first attached. In the case of a good
Well, naturally I wasn't going to file a bug unless someone told me
they were supposed to have matching uids/gids.
It just seemed odd, for example, to have clamav's uid=103, and it's gid=1004.
--
gentoo-user@lists.gentoo.org mailing list
--- On Fri, 5/16/08, Neil Bothwick [EMAIL PROTECTED] wrote:
From: Neil Bothwick [EMAIL PROTECTED]
Subject: Re: [gentoo-user] ttyS0 conflict was UPS recommendation
To: gentoo-user@lists.gentoo.org
Date: Friday, May 16, 2008, 3:21 PM
On Fri, 16 May 2008 14:57:24 -0700 (PDT), maxim wexler
Okay, I've had this happen before and was never able to fix it, hopefully
someone here will recognize what is happening and tell me where I went
wrong.
I'm installing a new Gentoo box, and have the basic system installed (
without X ). The problem began after I completed a successful emerge
On Saturday 17 May 2008, Bob Young wrote:
Can anybody explain what's going on here, and tell me how I can fix
it?
BTW, if I edit with vi.everything works fine, and of course typing at
the console works okay as well.
Just a guess... Did you run etc-update?
Ciao
Francesco
--
24 matches
Mail list logo
