KR>Elevator cables

Hello netters, I bought a KR2, and do not have plans with the plane. The cables to the elevator is very different in tension from the ailerons, so much so that I can get manual flutter at the elevator when fully deflected up. I bought a cable tension gauge, but do not have the plans to know

KR>Elevator cables

You should have a turnbuckle on each cable. If you don't, insert one on each. Tighten them to "tight". You need to be sure not to tighten one more than the other, because that will effectively make one shorter than the other and you will notice a binding as you operate the elevator. Your

KR>Elevator Cables

Colin, Is the belcrank spacing the same on both ends? If one arm is longer than the other it could cause a loose cable condition. My guess is; check the control stops and be sure they are adjusted properly. Lynn N37LH Colin Wrote I bought a KR2, and do not have plans with the plane. The

KR>Elevator cables

Plans are cheap insurance that Everything Has been done correctly and that what You do is correct. Buy a set, Virg On Thu, 17 Apr 2003 23:57:22 -0400 "Colin" writes: > Hello netters, > I bought a KR2, and do not have plans with the plane. The cables to > the