I have read the section http://lartc.org/howto/lartc.bridging.proxy-arp.html .
I configured my two ethernet devices with the same ip address .
Should i configure them with a specific command ?
I used : ifconfig eth0 192.168.47.104 netmask 255.255.255.0
ifconfig eth1 192.168.47.104
Nikolaos,
: I have read the section
: http://lartc.org/howto/lartc.bridging.proxy-arp.html . I configured my
: two ethernet devices with the same ip address . Should i configure them
: with a specific command ?
:
: I used : ifconfig eth0 192.168.47.104 netmask 255.255.255.0
:
Good day all!
I've been somewhat successful with shaping traffic coming in to my LAN's
clients, but am having a bit of difficulty shaping those same clients
outbound traffic. I'm using a Linux 2.4.20 multi-homed (eth0 and eth1)
firewall with IPTables. Looking at the example given at
On Thursday 03 April 2003 02:16, Osgaldo Suanzes wrote:
Hi there, this is my first post, so please excuse me Im still new to this
one,
Problem description
I have a linux router with 3 interfaces 1 goes to the internet 2MB
Bandwidth, 2 Lan FastEthernet
On the first Lan Interface I need to
What to do in future if you dont know the Ip Adress of Source
because of
DHCP Server?
That's an other problem. Maybe you can use the dhcp configuration so
each
time an ip-address is given to a pc, the tc scripts are updated. And
you can
use the hardware address to identify the client who
Hi folks,
i spent my whole day trying to set up my linux router using load
balancing with multiple uplinks. I mainly focused on the nano howto, but
somewhere I have a big mistake within my head.
Basically the load-balancing is working, but not on a per-connection
basis - just on a per packet
Hello..
I have a linux box and I want to make priority on traffic generated by my
LAN's computers..
I don't have a guaranted bandwidth, so I wanna use sfq...
I want to make traffic to port 80 , 443 , 25 110 PRIORITY 1
Traffic src or dest 192.168.0.2 to make priority 2
And the rest to put it
On Thursday 03 April 2003 21:43, Alexandru Coseru wrote:
Hello..
I have a linux box and I want to make priority on traffic generated by my
LAN's computers..
I don't have a guaranted bandwidth, so I wanna use sfq...
I want to make traffic to port 80 , 443 , 25 110 PRIORITY 1
Traffic src
I hope somebody can point me in the right direction. Ive seen a lot of
documentation on how to get htb and cbq to work with different types of
modems, but is there any documentation about t-1's? This is what my
situation is: I have a 24 channel t-1 fractionalized down to 16 because
of the 8
On Thursday 03 April 2003 22:44, Bernard wrote:
I hope somebody can point me in the right direction. Ive seen a lot of
documentation on how to get htb and cbq to work with different types of
modems, but is there any documentation about t-1's? This is what my
situation is: I have a 24 channel
Hello,
On Thu, 3 Apr 2003, Sjaak Nabuurs wrote:
iproute2 version ss001007 is running a newer version gives deadlink on
pervasive (whatever it means) !!!
This version fixes the problem:
ftp://ftp.inr.ac.ru/ip-routing/iproute2-2.4.7-now-ss020116-try.tar.gz
Regards
--
Julian
Hello,
On Thu, 3 Apr 2003, Michael Schoen wrote:
Due to the fact, I have the same gateway, I used the iif parameter for
policy routing - is that the problem??
Try without using iif, just dev pppXXX, without via GWIP,
i.e. check what happens when using only nexthop dev pppX
Hello!
I reada post on LARTC mailing list(http://mailman.ds9a.nl/pipermail/lartc/2002q3/004827.html) ...and Ifound a script called "Games
Script"!
I need to knowwhat I have done wrong in my scripts(see below) ! When
the bandwith it's FULL (of downloads), CounterStrike lag it's very very
I own a WIreless ISP and have recently began suppling bandwidth to college
dorms. As I expected, 90% of the bandwidth they consume is downloading music
with programs such as Kazaa. I would like to throttle this bandwidth, only as
needed. As long as extra, unused bandwidth was present, the
14 matches
Mail list logo