Adam Towarnyckyj wrote:
> Any tc filter command I try to
> add from here on out gives me the same error even if I try it manually
> instead of using the script.
Adam,
That is a killer.
Please read the following and then, when we both have the same
information, I'm going to try again to assist yo
gypsy wrote:
> Your script can be modified to display the line with the substitutions
> and to exit when executing causes an error. What I envision is that
> you'll watch 2000+ lines of good stuff scroll by and that the final
line
> will be your Bad Boy. And the last few lines are what we all are
On Wed, Jul 14, 2004 at 07:13:11PM -0700, gypsy wrote:
> Your script can be modified to display the line with the substitutions
> and to exit when executing causes an error. What I envision is that
> you'll watch 2000+ lines of good stuff scroll by and that the final line
> will be your Bad Boy.
On Thu, Jul 15, 2004 at 01:20:45PM +0530, anupam chomal wrote:
> I am trying to set up a linux box with 5 N/W cards of which one is
> 10/100/1000T and the others are 10/100T. I connected all the cards and
> turned on the machine. I wanted to force eth0 to be the 1000T cards but
> the cards get allo
Yup.
I had the same problem.
Soltuion: use nameif
You can call any interface anything you want.
Turning off auto negotiation and flow control may be an option when you
load the moadule (check docs)-- example: if it is a 3com 100mbps 905b -
you may be able to use ethtool to change it.
-Or
Hi,
I am trying to set up a linux box with 5 N/W cards of which one is
10/100/1000T and the others are 10/100T. I connected all the cards and
turned on the machine. I wanted to force eth0 to be the 1000T cards but
the cards get allotted eth0 to eth4 randomly. Is there some way wherein I
can force
