Hi All,
I've been playing with QOS for a short while now and have worked out how to do
what I want using HTB. Great queuing discipline btw.
My problem is the tc filters I want to setup aren't working because
iptables is getting to the packets first and mangling the src address.
The iptables sc
On Wed, May 11, 2005 at 08:00:30AM +0200, Hamish Whittal wrote:
> Hi all,
> I have the following configuration:
> ___
> ++/
> diginet link
Hi
i have looked at this Classify
its say
This target is only valid in the POST_ROUTING chain of the mangle table.
Usage:
iptables -t mangle -A POSTROUTING .. -j CLASSIFY --set-class MAJOR:MINOR
how about forward ??
hare
- Original Message -
From: "Andy Furniss" <[EMAIL PROTECTED]>
U can configure MRTG to measure traffic counted by iptables FORWARD chain. This way u will measure how much each host is taking without installing snmp. On 5/12/05,
KartheeK <[EMAIL PROTECTED]> wrote:
Hello Everybody,
I have configured a Linux box that does traffic shaping. Its working wonderfully
Hello Everybody,
I have configured a Linux box that does traffic shaping. Its working wonderfully fine, just as expected...Now i want to measure the bandwidth consumed by each of my hostsBut I dont want SNMP to run on all the hosts[as required by MRTG]
I used iptraf on my linux box, but it only
On Wed, 11 May 2005 23:39:35 +0100
Andy Furniss <[EMAIL PROTECTED]> wrote:
> Pan'ko Alexzender wrote:
> > Hi!
> > By iptables I set marking (-j MARK) just before -j IMQ.
> > There are only three marks. Exectly all of them are ditected to 1:20
>
> What are the rules.
There was three tables. At th
Hi,
I have a question concerning the configuration of multiple uplinks as
described in the lartc howto, chapter 4.2:
I have a scenario as described in the lartc in Chapter 4.2 (Routing for
multiple uplinks/providers), i.e. one linux router with two uplinks:
* 2 Mbps low delay DSL connection on
Scott Mcdermott wrote:
I am looking for a simple way to guarantee to each flow
going through my traffic control point 1/numflows of
bandwidth. I thought using SFQ would do this effectively
but it appears to be quite unfair: a very high speed
download that fills the pipe easily starves smaller flow
Pan'ko Alexzender wrote:
Hi!
By iptables I set marking (-j MARK) just before -j IMQ.
There are only three marks. Exectly all of them are ditected to 1:20
What are the rules.
Why I see 3 pkts in default 1:30?
How explain it?
Maybe there was traffic flowing when you ran the script.
Andy.
### imq0:
Ulrich Pöschl wrote:
hello folks,
this is my first post to that list. so I hope I am not completely OT
here :-)
reading the (excellent!) lartc and then writing my own qos-script I have
still some open questions which I will try to formulate now:
- "Now we can optionally attach queuing disciplin
Robert Denier wrote:
I couldn't find anyone who had actually made it work via google so I
guess I'll ask here.
My setup is a VPN point to point link. The VPN is a modified version of
Openvpn where I'm using zlib compression to improve the compression a
bit.
The goal is to shape traffic coming from
S.Mehdi Sheikhalishahi wrote:
Does tc understand irregular configurations?
For example in a configuration that parent class has ceil and rate
parameters less than child classes?
How can I limit output traffic of an interface?
I test it by limiting parent class traffic but it does not work.
I t
richard lucassen wrote:
Is it possible (one way or another) to guarantee or to limit bandwidth
of 1 session?
E.g.:
RDP: 750kbit rate, 1Mbit ceil
default: 250kbit rate, 1Mbit ceil
max bw per RDP connection: 100kbit
guaranteed bw per RDP session: 20kbit
R.
If you can't make a rule to match each conne
PRETI wrote:
Hi everybody,
My config is two RED waiting queues and I would like to know if it is
possible to have the size of the waiting queue in real time with the tc
command or whatever.
tc -s qdisc ls dev eth0 or whatever dev you shape on will give a packet
count as backlog.
Andy.
Pavan Kumar wrote:
Hi,
Sorry to bother you all. I have a typical problem sharing DSL upstream
bandwidth with users. I have 3 types of traffic high-priority,
medium-priority and low priority. My upstream rate is 960kbits. Traffic (any
priority) can vary in bandwidth from 0 to 960kbits. I have a test
hareram wrote:
Hi all
Its been long time i have sending this message to this news group
but i could not get proper responce from the authors or any experts
that, is that bug or only the problem with my ssytem
iam tryin this config with FC
iptable 1.3.0
and latest TC tc utility, iproute2-ss050330
Stef Coene wrote:
Hi,
I'm subscribed to this mailing list for a long time. During that time, I
enjoyed reading all posts and try to understand them :)
LARTC started as a something I could use to impress my boss. After a while it
became clear to me that my boss was not impressed ;(, but I kept
Am Dienstag, 10. Mai 2005 14:56 schrieb Markus Schulz:
> Am Dienstag, 10. Mai 2005 09:33 schrieb Rafael A Barrero:
> > Thanks for the link!
> >
> > At the beginning of the document it states that it will not work
> > with two modem connections. What if both my ADSL lines are pppoe?
> > Will this st
Hi,
I'm subscribed to this mailing list for a long time. During that time, I
enjoyed reading all posts and try to understand them :)
LARTC started as a something I could use to impress my boss. After a while it
became clear to me that my boss was not impressed ;(, but I kept following
this
Naturally I forgot to attach the code, as I was rushing to get to lunch.
R.harper
p.s why do my messages end up as a reply to someone else's message in the
archive?
_
Log på MSN Messenger direkte fra nettet http://webmessenger.msn.c
Hello lartc
I wrote a scheduling qdisc that works on a per-flow basis. It dequeue
packets according to a flow interval. But as it turns out there is a problem
with it.
The qdisc loads just fine and is working correctly. The problem is that if
the qdisc is removed and loaded again, it stops resp
21 matches
Mail list logo