Hi, Martin.
which is your experience with frottle ?
Which is your external AP ?
Can you post your frottle configure files ?
regards
andres
- Hi,
-
- I'm trying to configure IMQ to work on the same machine with frottle
- (http://frottle.sourceforge.net). The problem is both feed themselves
Hi,
I do not have much of experience with frottle, but the project is well
documented and my configuration is almost exact copy of the default one:
This are non-commented lines from my master's /etc/frottle.conf:
mastermode 1
clientmode 1
daemon 1
masterip 10.0.0.249
queuesize 100
hiports
Hi,
Thanks for the response, Ed.
It seems I have not been clear enough. Forget about frottle, currently the
problem is much simpler. I have two NICs in a bridge (which is router's
LAN interface) and another NIC which is the WAN. The upstream can be
easily controlled with an egress qdisc set on
I have compiled IMQ as a module (with NAT patch).
I have also compiled ip_queue as a module.
Problem is that when imq module is loaded, you can not load the ip_queue
module and v.v.
I'm not sure which ip_queue you mean, but on my 2.6 wolk kernel I have
IMQ compiled and ip_nf_queue (userspace
To be able to serve them in a
predetermined, controlled fashion I want to put all traffic that goes
out of eighter LAN NIC into IMQ device and impose QoS policy on top of
it. This will allow to use in the most efficient manner all available
WAN bandwidth.
Perhaps I misunderstand, but for outoing