d then add F200 back as QDIO.
Sam Bass
254-771-7212
Sr z/OS Systems Specialist
-Original Message-
From: Sam Bass
Sent: Monday, April 14, 2008 1:02 PM
To: 'Linux on 390 Port'
Subject: Help needed adding LCS Ethernet on a z9 for z/Linux LPAR (NO VM)
I am reposting to mak
Sam,
are your devices 0.0.f100, 0.0.f101 known, i.e. contained in the output for
"lscss"?
Are the modules cu3088 and lcs loaded, i.e. contained in the output for
"lsmod"?
Best regards, Ursula Braun, IBM Germany
--
For LINUX-390 s
I am reposting to make sure this went out.
Any help would be greatly appreciated.
Sam
Hi,
We are trying to add another OSA LCS Ethernet on our z/9 z/Linux LPAR (SLES 10
sp1)
CHP F1 is defined in IODF as OSE
Looking at some PDFs I see that it say that we only have to do the following:
>>> On Mon, Apr 14, 2008 at 10:48 AM, in message
<[EMAIL PROTECTED]>, Sam
Bass <[EMAIL PROTECTED]> wrote:
-snip-
> Looking at some PDFs I see that it say that we only have to do the
> following:
>
> echo 0.0.f100,0.0.f101 > /sys/bus/ccwgroup/drivers/lcs/group
>
> 1.Without an "echo -n"
Hi,
We are trying to add another OSA LCS Ethernet on our z/9 z/Linux LPAR (SLES 10
sp1)
CHP F1 is defined in IODF as OSE
Looking at some PDFs I see that it say that we only have to do the following:
echo 0.0.f100,0.0.f101 > /sys/bus/ccwgroup/drivers/lcs/group
1. Without an "echo -n