Hi,
We are trying to add another OSA LCS Ethernet on our z/9 z/Linux LPAR (SLES 10
sp1)
CHP F1 is defined in IODF as OSE
Looking at some PDFs I see that it say that we only have to do the following:
echo 0.0.f100,0.0.f101 > /sys/bus/ccwgroup/drivers/lcs/group
1. Without an "echo -n" we get an echo invalid argument
2. With "echo -n " we get no message and nothing build in the appropriate
/sys/bus/ccwgroup areas.
Next we tried YAST, we rebooted and it f100 times out.
F200 is already an LCS, but we want to convert it to QETH as soon I we can get
this second LCS Ethernet working.
There is NO OAT for f100.
I have done an "zipl -c /etc/zipl.conf"
Here is my /etc/zipl.conf
[defaultboot]
defaultmenu = menu
[SLES_10_SP1]
image = /boot/image-2.6.16.54-0.2.3-default
target = /boot/zipl
ramdisk = /boot/initrd-2.6.16.54-0.2.3-default,0x1000000
# parameters = "root=/dev/disk/by-id/ccw-IBM.75000000029646.3800.2f-part2
TERM=dumb"
parameters = "dasd=382f,392f
root=/dev/disk/by-id/ccw-IBM.75000000029646.3800.2f-part2 TERM=dumb"
:menu
default = 1
prompt = 1
target = /boot/zipl
timeout = 15
1 = ipl
###Don't change this comment - YaST2 identifier: Original name: ipl###
[ipl]
image = /boot/image
target = /boot/zipl
ramdisk = /boot/initrd,0x1000000
#parameters = "root=/dev/disk/by-id/ccw-IBM.75000000029646.3800.2f-part2
TERM=dumb"
parameters = "dasd=382f,392f
root=/dev/disk/by-id/ccw-IBM.75000000029646.3800.2f-part2 TERM=dumb
cio_ignore=all,!0.0.382F,!0.0.392F,!0.0.F100-0.0.F11E,!0.0.F200-0.0.F202,!0.0.C000-0.0.C01F,!0.0.C100
-0.0.C11F"
Sam Bass
254-771-7212
Sr z/OS Systems Specialist
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
