I am putting a new machine together and I have dual raptor raid 1 for the
root, which works just fine under all stress tests.
Then I have the WD 750 GiB drive (not RE2, desktop ones for ~150-160 on
sale now adays):
I ran the following:
dd if=/dev/zero of=/dev/sdc
dd if=/dev/zero of=/dev/sdd
On Sat, 1 Dec 2007, Jan Engelhardt wrote:
On Dec 1 2007 06:26, Justin Piszcz wrote:
I ran the following:
dd if=/dev/zero of=/dev/sdc
dd if=/dev/zero of=/dev/sdd
dd if=/dev/zero of=/dev/sde
(as it is always a very good idea to do this with any new disk)
Why would you care about what's on
On Dec 1 2007 06:26, Justin Piszcz wrote:
> I ran the following:
>
> dd if=/dev/zero of=/dev/sdc
> dd if=/dev/zero of=/dev/sdd
> dd if=/dev/zero of=/dev/sde
>
> (as it is always a very good idea to do this with any new disk)
Why would you care about what's on the disk? fdisk, mkfs and
the day-to-
On Dec 1, 2007 2:43 AM, Richard Scobie <[EMAIL PROTECTED]> wrote:
>
>
> Alan Cox wrote:
>
> > If you want really high performance use multiple drives, on multiple PCIE
> > controllers. Just make sure your backup planning of raid 1+0 setup is
> > done right as many drives means a lot more drive fail
sata_mv: Fix broken Marvell 7042 support.
The Marvell 7042 chip is more or less the same as the 6042 internally,
but sports a PCIe bus. Despite having identical SATA cores, the 7042
does differ from its PCI bus counterparts in placment and layout of
certain bus related registers.
This patch fi
On Sat, 01 Dec 2007 13:07:22 -0500
Mark Lord <[EMAIL PROTECTED]> wrote:
> sata_mv: Fix broken Marvell 7042 support.
>
> The Marvell 7042 chip is more or less the same as the 6042 internally,
> but sports a PCIe bus. Despite having identical SATA cores, the 7042
> does differ from its PCI bus co
Jan Engelhardt wrote:
On Dec 1 2007 06:26, Justin Piszcz wrote:
I ran the following:
dd if=/dev/zero of=/dev/sdc
dd if=/dev/zero of=/dev/sdd
dd if=/dev/zero of=/dev/sde
(as it is always a very good idea to do this with any new disk)
Why would you care about what's on the disk? fdisk, mkfs an
Greg Freemyer wrote:
Also, if you have Port Multiplexers (PMPs) in use, that would be
interesting to know. I don't even know if PMPs are supported via SAS
controllers in 2.6.24 or not. ie. PMP support is new to 2.6.24 and
only a few Sata controllers will have PMP support in 2.6.24.
No, por
Richard Scobie wrote:
Greg Freemyer wrote:
Also, if you have Port Multiplexers (PMPs) in use, that would be
interesting to know. I don't even know if PMPs are supported via SAS
controllers in 2.6.24 or not. ie. PMP support is new to 2.6.24 and
only a few Sata controllers will have PMP suppo
Justin Piszcz wrote:
I am putting a new machine together and I have dual raptor raid 1 for
the root, which works just fine under all stress tests.
Then I have the WD 750 GiB drive (not RE2, desktop ones for ~150-160 on
sale now adays):
I ran the following:
dd if=/dev/zero of=/dev/sdc
dd if=
Mark Lord wrote:
SATA port multipliers (think, "hub") permit multiple drives
to be active simultaneously.
Quite true, although the host controller could artificially limit this,
giving the user a mistaken impression of their port multiplier being
limited to one-command-per-N-drives.
:)
sonic zhang wrote:
UDMA Mode - Frequency compatibility
UDMA5 - 100 MB/s - SCLK = 133 MHz
UDMA4 - 66 MB/s- SCLK >= 80 MHz
UDMA3 - 44.4 MB/s - SCLK >= 50 MHz
UDMA2 - 33 MB/s- SCLK >= 40 MHz
Signed-off-by: Sonic Zhang <[EMAIL PROTECTED]>
---
drivers/ata/pata_bf54x.c |7 +++
Saeed Bishara wrote:
From: Saeed Bishara <[EMAIL PROTECTED]>
use sstatus instead status.
Signed-off-by: Saeed Bishara <[EMAIL PROTECTED]>
---
drivers/ata/sata_mv.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index a43f
Kristoffer Nyborg Gregertsen wrote:
Several fixes for the AVR32 PATA driver:
* Updated to use new AVR32 SMC timing API. This removes the need for "magic"
constants in signal timing.
* Removed the ATA_FLAG_PIO_POLLING, the driver should use interrupts.
* Removed .port_disable and .irq_ack as th
Tejun Heo wrote:
Protocol and CDB allocation size field are important in determining
what went wrong with ATAPI commands. Report them on failure.
Signed-off-by: Tejun Heo <[EMAIL PROTECTED]>
---
This one is for #upstream-fixes. Thanks.
nod, applied
-
To unsubscribe from this list: send the
Hi,
On Thursday 29 November 2007, Mark Lord wrote:
> Nick Warne wrote:
> > Hi all,
> >
> > 2.6.23.9
> >
> > I have noticed after applying Bart's patch to word93 blacklist my new
> > DVD drive:
> >
> > http://lkml.org/lkml/2007/10/23/475
> >
> > I see now in logs (look at the hdd line:
> >
>
Hi,
On Saturday 01 December 2007, Kiyoshi Ueda wrote:
> This patch converts ide-cd (cdrom_newpc_intr()) to use blk_end_request().
>
> ide-cd (cdrom_newpc_intr()) has some tricky behaviors below which
> need to use blk_end_request_callback().
> Needs to:
> 1. call post_transform_command() to mo
On Saturday 01 December 2007, Kiyoshi Ueda wrote:
> This patch converts "normal" parts of ide to use blk_end_request().
>
> Signed-off-by: Kiyoshi Ueda <[EMAIL PROTECTED]>
> Signed-off-by: Jun'ichi Nomura <[EMAIL PROTECTED]>
> ---
> drivers/ide/ide-cd.c |6 +++---
> drivers/ide/ide-io.c | 1
Mark Lord wrote:
sata_mv: Fix broken Marvell 7042 support.
The Marvell 7042 chip is more or less the same as the 6042 internally,
but sports a PCIe bus. Despite having identical SATA cores, the 7042
does differ from its PCI bus counterparts in placment and layout of
certain bus related registe
Tejun Heo wrote:
From: Peter Schwenke <[EMAIL PROTECTED]>
Add more toshiba laptops to broken suspend list. This is from OSDL
bugzilla bug 7780.
tj: re-formatted patch and added description and SOB.
Signed-off-by: Peter Schwenke <[EMAIL PROTECTED]>
Signed-off-by: Tejun Heo <[EMAIL PROTECTED]>
Tejun Heo wrote:
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 5eb5983..8d5cd16 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5969,7 +5946,7 @@ void ata_qc_issue(struct ata_queued_cmd *qc)
*/
WARN_ON(ap->ops->error_handler &
Tejun Heo wrote:
Move ata_set_mode() to libata-eh.c. ata_set_mode() is surely an EH
action and will be more tightly coupled with the rest of error
handling. Move it to libata-eh.c.
Signed-off-by: Tejun Heo <[EMAIL PROTECTED]>
Does this mean SET FEATURES - XFER MODE via SG_IO will be possible
Tejun Heo wrote:
It's very likely that the configured data transfer mode is the wrong
one if device fails data transfers right after initial data transfer
mode configuration (including NCQ on/off and xfermode). libata EH
needs to speed down fast before upper layers give up on probing.
This patc
Anton Vorontsov wrote:
Hi all,
Here is the second spin of the OF-platform PATA driver and
related patches.
Changes since RFC:
- nuked drivers/ata/pata_platform.h;
- powerpc bits: proper localbus node added.
Thanks for the previous review! This time I'm collecting acks,
don't be shy to give 'e
Tejun Heo wrote:
Area for DFLAGs which are cleared on INIT is full. Extend it by 8
bits.
Signed-off-by: Tejun Heo <[EMAIL PROTECTED]>
---
include/linux/libata.h |6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
applied 1-8 to #upstream
-
To unsubscribe from this list: send th
Tejun Heo wrote:
Cable detection on NV PATA hosts isn't implemented and the CBLID-
cable isn't wired according to the sepc either, so both host-side and
generic drive-side cable detections are broken. Till now,
nv_cable_detect() relied on peeking BIOS and ACPI configurations to
upgrade to 80C bu
Tejun Heo wrote:
Make pdc_atapi_pkt() use values from qc->tf instead of creating its
own. This is to ease future ATAPI handling changes.
DONT APPLY YET
---
Mikael, would this work? Values other than lbam and lbah remain the
same. Does sata_promise have strict requirements for lbam and lbah?
Kristen Carlson Accardi wrote:
Enclosure Management via LED
This patch implements Enclosure Management via the LED protocol as specified
in AHCI specification.
Signed-off-by: Kristen Carlson Accardi <[EMAIL PROTECTED]>
---
This revision makes the change to the comment requested by Mark Lord,
fi
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
upstream-linus
to receive the following updates:
drivers/ata/ata_piix.c| 28 +++
drivers/ata/libata-core.c |8 +++--
drivers/ata/libata-eh.c | 42 +++
Tejun Heo wrote:
ata_id_to_dma_mode() isn't quite generic. The function is basically
privately implemented ata_id_xfermask() combined with hardcoded mode
printing and configuration which are specific to ata_generic.
Kill the function and open code it in generic_set_mode() using generic
xfermode
On Sat, 1 Dec 2007 22:59:35 +0100 Bartlomiej Zolnierkiewicz wrote:
> Thanks for reporting/debugging it guys!
>
> > Something in there needs to insert a '\n' before the "skipping word"
> > message.
> > Since it doesn't do that right now, the KERN_DEBUG string appears as "<7>"
>
> This seems like
Tejun Heo wrote:
Unindent loop body in generic_set_mode(). This is to ease future
change.
Signed-off-by: Tejun Heo <[EMAIL PROTECTED]>
---
drivers/ata/ata_generic.c | 31 ---
1 files changed, 16 insertions(+), 15 deletions(-)
applied 1-12 to #upstream, with comm
Jeff Garzik wrote:
Mark Lord wrote:
SATA port multipliers (think, "hub") permit multiple drives
to be active simultaneously.
Quite true, although the host controller could artificially limit this,
giving the user a mistaken impression of their port multiplier being
limited to one-command-p
On Sat, Dec 01, 2007 at 05:54:49PM -0500, Jeff Garzik wrote:
> Anton Vorontsov wrote:
> > Hi all,
> >
> > Here is the second spin of the OF-platform PATA driver and
> > related patches.
> >
> > Changes since RFC:
> > - nuked drivers/ata/pata_platform.h;
> > - powerpc bits: proper localbus node ad
Richard Scobie wrote:
Jeff Garzik wrote:
Mark Lord wrote:
SATA port multipliers (think, "hub") permit multiple drives
to be active simultaneously.
Quite true, although the host controller could artificially limit
this, giving the user a mistaken impression of their port multiplier
being l
Oh, more fiction:
Because SATA uses point-to-point connectivity, the scaling
available with SAS controllers is not possible with SATA
controllers. SATA drives must be connected on a one-to-one
basis with the SATA connectors on the controller – i.e, a fourport
SATA controller can connect up to fo
On Sun, Dec 02, 2007 at 02:58:10AM +0300, Anton Vorontsov wrote:
> On Sat, Dec 01, 2007 at 05:54:49PM -0500, Jeff Garzik wrote:
> while (1) {
> send_patches();
>
> if (ack_collected(PaulM) && ack_collected(PowerPC_people))
> break;
>
> sleep(wait_for_comments_timeo
On Tue, Nov 27, 2007 at 06:39:08PM +0300, Anton Vorontsov wrote:
> +static struct of_device_id pata_of_platform_match[] = {
> + { .compatible = "pata-platform", },
> +};
On top of previous comment about the compatible string being
inappropriate:
You should add a MODULE_DEVICE_TABLE() entry f
38 matches
Mail list logo