These fields are only used within ucc_geth_startup(), so they might as
well be local variables in that function rather than being stashed in
struct ucc_geth_private.
Aside from making that struct a tiny bit smaller, it also shortens
some lines (getting rid of pointless casts while here), and
ugeth is the netdiv_priv() part of the netdevice. Accessing the memory
pointed to by ugeth (such as done by ucc_geth_memclean() and the two
of_node_puts) after free_netdev() is thus use-after-free.
Signed-off-by: Rasmus Villemoes
---
drivers/net/ethernet/freescale/ucc_geth.c | 4 ++--
1 file
On Thu, 3 Dec 2020 11:53:50 +0800
Ye Xiang wrote:
> Currently custom sensors properties are not decoded and it is up to
> user space to interpret.
>
> Some manufacturers already standardized the meaning of some custom sensors.
> They can be presented as a proper IIO sensor. We can identify
Add a helper that takes a virtual address rather than the muram
offset. This will be used in a couple of places to avoid having to
store both the offset and the virtual address, as well as removing
NULL checks from the callers.
Signed-off-by: Rasmus Villemoes
---
drivers/soc/fsl/qe/qe_common.c
This removes the explicit NULL checks, and allows us to stop storing
at least some of the _offset values separately.
Signed-off-by: Rasmus Villemoes
---
drivers/net/ethernet/freescale/ucc_geth.c | 77 ++-
1 file changed, 33 insertions(+), 44 deletions(-)
diff --git
Signed-off-by: Rasmus Villemoes
---
drivers/net/ethernet/freescale/ucc_geth.c | 5 +
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c
b/drivers/net/ethernet/freescale/ucc_geth.c
index f854ff90f238..e1574c14b7e5 100644
---
On Fri, Dec 04, 2020 at 10:42:26AM +0800, Zhen Lei wrote:
> All warnings are related only to "wrong indentation", except one:
> Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml:4:1: \
> [error] missing document start "---" (document-start)
>
> Signed-off-by: Zhen Lei
> Cc: Rob Herring
Table 8-53 in the QUICC Engine Reference manual shows definitions of
fields up to a size of 192 bytes, not just 128. But in table 8-111,
one does find the text
Base Address of the Global Transmitter Parameter RAM Page. [...]
The user needs to allocate 128 bytes for this page. The address must
In theory, such a read-after-write might be required by the hardware,
but nothing in the data sheet suggests that to be the case. The name
test also suggests that it's some debug leftover.
Signed-off-by: Rasmus Villemoes
---
drivers/net/ethernet/freescale/ucc_geth.c | 3 ---
1 file changed, 3
Allow passing const-qualified pointers without requiring a cast in the
caller.
Signed-off-by: Rasmus Villemoes
---
drivers/soc/fsl/qe/qe_common.c | 2 +-
include/soc/fsl/qe/qe.h| 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/soc/fsl/qe/qe_common.c
While trying to figure out how to allow bumping the MTU with the
ucc_geth driver, I fell into a rabbit hole and stumbled on a whole
bunch of issues of varying importance - some are outright bug fixes,
while most are a matter of simplifying the code to make it more
accessible.
At the end of
Hi Neil,
> +
> +static int khadas_ts050_panel_probe(struct mipi_dsi_device *dsi)
> +{
> + struct khadas_ts050_panel *khadas_ts050;
> + int err;
> +
> + dsi->lanes = 4;
> + dsi->format = MIPI_DSI_FMT_RGB888;
> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST
Le vendredi 4 décembre 2020, 19:02:09 CET James Bottomley a écrit :
> On Fri, 2020-12-04 at 18:07 +0100, Ard Biesheuvel wrote:
> > On Fri, 4 Dec 2020 at 18:06,
> >
> > wrote:
> > > From: Francis Laniel
> > >
> > > The two functions indicates if a string begins with a given prefix.
> > > The
On Sat, Dec 05 2020 at 17:24, Oleksandr Natalenko wrote:
> On Sat, Dec 05, 2020 at 05:19:18PM +0100, Thomas Gleixner wrote:
>> +/**
>> + * generic_dispatch_irq - Dispatch an interrupt from an interrupt handler
>> + * @irq:The irq number to handle
>> + *
>> + * A wrapper around
Davidlohr Bueso writes:
> On Fri, 04 Dec 2020, Linus Torvalds wrote:
>
>>On Fri, Dec 4, 2020 at 12:30 PM Bernd Edlinger
>> wrote:
>>> >perf_event_open (exec_update_mutex -> ovl_i_mutex)
>>
>>Side note: this one looks like it should be easy to fix.
>>
>>Is there any real reason why
When I build kernel with ARCH=arm64, the building errors came out like
this:
CC mm/kfence/core.o
In file included from ../mm/kfence/core.c:21:
../arch/arm64/include/asm/kfence.h: In function ‘kfence_protect_page’:
../arch/arm64/include/asm/kfence.h:12:2: error: implicit declaration of
commit 1fde6f21d90f8ba5da3cb9c54ca991ed72696c43
proc: fix /proc/net/* after setns(2)
only forced revalidation of regular files under /proc/net/
However, /proc/net/ is unusual in the sense of /proc/net/foo handlers
take netns pointer from parent directory which is old netns.
On Fri, Dec 04, 2020 at 03:56:23PM +0100, Oleksij Rempel wrote:
> Allow DSA drivers to export stats64
>
> Signed-off-by: Oleksij Rempel
> Reviewed-by: Vladimir Oltean
Reviewed-by: Andrew Lunn
Andrew
On Fri, Dec 04, 2020 at 02:34:15PM +0200, Claudiu Beznea wrote:
> This is necessary for SAMA7G5 as it uses different values for
> PHY interface and also introduces hdfctlen bit.
>
> Signed-off-by: Claudiu Beznea
Reviewed-by: Andrew Lunn
Andrew
On Fri, Dec 04, 2020 at 02:34:19PM +0200, Claudiu Beznea wrote:
> Add documentation for SAMA7G5 gigabit ethernet interface.
>
> Signed-off-by: Claudiu Beznea
Reviewed-by: Andrew Lunn
Andrew
On Fri, Dec 04, 2020 at 02:34:16PM +0200, Claudiu Beznea wrote:
> SAMA7G5's ethernet IPs TX clock could be provided by its generic clock or
> by the external clock provided by the PHY. The internal IP logic divides
> properly this clock depending on the link speed. The patch adds a new
>
> +static void ar9331_stats_update(struct ar9331_sw_port *port,
> + struct rtnl_link_stats64 *stats)
> +{
> + struct ar9331_sw_stats *s = >stats;
> +
> + stats->rx_packets = s->rxbroad + s->rxmulti + s->rx64byte +
> + s->rx128byte + s->rx256byte +
On Fri, Dec 04, 2020 at 02:34:21PM +0200, Claudiu Beznea wrote:
> Add support for SAMA7G5 10/100Mbps interface.
>
> Signed-off-by: Claudiu Beznea
Reviewed-by: Andrew Lunn
Andrew
On Thu, Dec 3, 2020 at 11:45 AM Jakub Kicinski wrote:
...
> nit: let's narrow down the ifdef-enery
>
> no need for the ifdef here, if the helper looks like this:
>
> +static void bond_set_xfrm_features(struct net_device *bond_dev, u64 mode)
> +{
> +#ifdef CONFIG_XFRM_OFFLOAD
> + if (mode ==
On 12/3/20 10:44 AM, Chen-Yu Tsai wrote:
> On Fri, Dec 4, 2020 at 12:25 AM Martin Cerveny wrote:
>>
>> Hello.
>>
>> On Thu, 3 Dec 2020, Chen-Yu Tsai wrote:
>>
>>> Hi,
>>>
>>> On Mon, Nov 16, 2020 at 8:57 PM Martin Cerveny
>>> wrote:
Allwinner V3s has system control and SRAM C1 region
On Fri, Dec 04, 2020 at 02:34:20PM +0200, Claudiu Beznea wrote:
> Add support for SAMA7G5 gigabit ethernet interface.
>
> Signed-off-by: Claudiu Beznea
Reviewed-by: Andrew Lunn
Andrew
Hi, Vinod:
Vinod Koul 於 2020年12月5日 週六 下午5:11寫道:
>
> mtk_hdmi_phy_driver is not declared as static, so statify it.
>
> drivers/phy/mediatek/phy-mtk-hdmi.c:204:24: warning: symbol
> 'mtk_hdmi_phy_driver' was not declared. Should it be static?
>
Acked-by: Chun-Kuang Hu
> Signed-off-by: Vinod
On Thu, 3 Dec 2020 11:50:03 +0200
Alexandru Ardelean wrote:
> Since a main requirement for an IIO device is to have a parent device
> object, it makes sense to attach more of the IIO device's objects to the
> lifetime of the parent object, to clean up the code.
> The idea is to also provide a
On Fri, Dec 04, 2020 at 02:34:18PM +0200, Claudiu Beznea wrote:
> Add documentation for SAMA7G5 ethernet interface.
>
> Signed-off-by: Claudiu Beznea
Reviewed-by: Andrew Lunn
Andrew
On Fri, Dec 04, 2020 at 09:58:21PM +0100, Thomas Gleixner wrote:
> On Fri, Dec 04 2020 at 20:27, Corentin Labbe wrote:
> > On Fri, Dec 04, 2020 at 04:08:27PM +0100, Thomas Gleixner wrote:
> >> On Fri, Dec 04 2020 at 14:26, Corentin Labbe wrote:
> >> > On Fri, Dec 04, 2020 at 12:34:05AM +0100,
On Sat, Dec 05, 2020 at 11:29:26PM +0800, Muchun Song wrote:
> On Sat, Dec 5, 2020 at 10:09 PM Greg KH wrote:
> >
> > On Sat, Dec 05, 2020 at 09:02:20PM +0800, Muchun Song wrote:
> > > Converrt NR_FILE_THPS account to pages.
> > >
> > > Signed-off-by: Muchun Song
> > > ---
> > >
On Sat, Dec 5, 2020 at 11:32 PM Greg KH wrote:
>
> On Sat, Dec 05, 2020 at 11:29:26PM +0800, Muchun Song wrote:
> > On Sat, Dec 5, 2020 at 10:09 PM Greg KH wrote:
> > >
> > > On Sat, Dec 05, 2020 at 09:02:20PM +0800, Muchun Song wrote:
> > > > Converrt NR_FILE_THPS account to pages.
> > > >
> >
On Fri, Dec 04, 2020 at 02:34:17PM +0200, Claudiu Beznea wrote:
> Unprepare clocks in case of any failure in fu540_c000_clk_init().
Hi Claudiu
Nice patchset. Simple to understand.
>
> +err_disable_clocks:
> + clk_disable_unprepare(*tx_clk);
> + clk_disable_unprepare(*hclk);
> +
commit 1fde6f21d90f8ba5da3cb9c54ca991ed72696c43
proc: fix /proc/net/* after setns(2)
only forced revalidation of regular files under /proc/net/
However, /proc/net/ is unusual in the sense of /proc/net/foo handlers
take netns pointer from parent directory which is old netns.
On Sat, Dec 05, 2020 at 09:02:20PM +0800, Muchun Song wrote:
> Converrt NR_FILE_THPS account to pages.
>
> Signed-off-by: Muchun Song
> ---
> drivers/base/node.c | 3 +--
> fs/proc/meminfo.c | 2 +-
> mm/filemap.c| 2 +-
> mm/huge_memory.c| 3 ++-
> mm/khugepaged.c | 2 +-
>
On Thu, 3 Dec 2020 11:53:52 +0800
Ye Xiang wrote:
> Add channel description for hinge sensor, including channel label
> attribute and raw data description.
>
> Signed-off-by: Ye Xiang
> ---
> Documentation/ABI/testing/sysfs-bus-iio | 17 +
> 1 file changed, 17 insertions(+)
>
On Sat, Dec 05, 2020 at 08:52:50AM -0600, Pierre-Louis Bossart wrote:
>
> > > MODULE_DESCRIPTION("Regmap SoundWire MBQ Module");
> > > -MODULE_LICENSE("GPL v2");
> > > +MODULE_LICENSE("GPL");
> >
> > Why do you want to change this ?
>
> We only use MODULE_LICENSE("GPL") for new contributions
On Sat, Dec 05, 2020 at 11:39:24PM +0800, Muchun Song wrote:
> On Sat, Dec 5, 2020 at 11:32 PM Greg KH wrote:
> >
> > On Sat, Dec 05, 2020 at 11:29:26PM +0800, Muchun Song wrote:
> > > On Sat, Dec 5, 2020 at 10:09 PM Greg KH
> > > wrote:
> > > >
> > > > On Sat, Dec 05, 2020 at 09:02:20PM +0800,
Aside from the UTMI+ there are also ULPI, Serial and HSIC PHY types
that can be specified in the phy_type HCD property. Add them to the
enumeration of the acceptable values.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Changelog v2:
- Grammar fix: "s/PHY types can be/PHY types that
On Sat, Dec 05, 2020 at 05:19:18PM +0100, Thomas Gleixner wrote:
> On Fri, Dec 04 2020 at 21:19, Oleksandr Natalenko wrote:
> > On Thu, Dec 03, 2020 at 07:04:00PM +,
> > bugzilla-dae...@bugzilla.kernel.org wrote:
> >>2) Have a wrapper around handle_generic_irq() which ensures that
> >>
On Sat, 05 Dec 2020 08:06:40 +0100 Sven Eckelmann wrote:
> On Wednesday, 2 December 2020 13:49:54 CET Enrico Weigelt, metux IT consult
> wrote:
> > Remove MODULE_VERSION(), as it isn't needed at all: the only version
> > making sense is the kernel version.
>
> Is there some explanation besides
On Sat, Dec 05, 2020 at 01:20:18PM +0200, Vladimir Oltean wrote:
> On Wed, Dec 02, 2020 at 01:49:53PM +0100, Enrico Weigelt, metux IT consult
> wrote:
> > Remove MODULE_VERSION(), as it isn't needed at all: the only version
> > making sense is the kernel version.
> >
> > Signed-off-by: Enrico
Fixed a coding style issue
Signed-off-by: Clement Smith
---
drivers/tty/serial/jsm/jsm_tty.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c
index 2bc5f32e59f4..45e212be64c4 100644
---
This reverts commit 8a66790b7850a6669129af078768a1d42076a0ef.
Switching this function to AE_CTRL_TERMINATE broke the documented
behaviour of acpi_dev_get_resources() - AE_CTRL_TERMINATE does not, in
fact, terminate the resource walk because acpi_walk_resource_buffer()
ignores it (specifically
On Fri, 4 Dec 2020 at 18:44, Jon Hunter wrote:
>
>
> On 04/12/2020 16:07, Marek Szyprowski wrote:
> > Hi All,
> >
> > On 04.12.2020 14:42, Qian Cai wrote:
> >> On Thu, 2020-12-03 at 23:23 +0800, carver4...@163.com wrote:
> >>> From: Hailong Liu
> >>>
> >>> When system in the booting stage, pages
On Tue, Dec 1, 2020 at 2:21 PM Stefan Agner wrote:
>
> According to the datasheet (Rev. 1.9) the RTL8211F requires at least
> 72ms "for internal circuits settling time" before accessing the PHY
> egisters. This fixes an issue where the Ethernet link doesn't come up
> when using ip link set
With minor peculiarities (like uploading some vendor-specific firmware)
these are just Generic xHCI controllers fully compatible with its
properties. Make sure the Renesas USB xHCI DT nodes are also validated
against the Generic xHCI DT schema.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
On Sat, Dec 05, 2020 at 07:50:08PM +0530, Clement Smith wrote:
> Fixed a coding style issue
>
> Signed-off-by: Clement Smith
> ---
> drivers/tty/serial/jsm/jsm_tty.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
The subject lines in this series is really funny.
Please don't do this.
On Thu, 3 Dec 2020 22:20:18 -0800
Randy Dunlap wrote:
> Do basic editing & correction to intel-ish-hid.rst:
> - fix grammar, verb tense, punctutation, and word phrasing
> - fix spellos
> - hyphenate multi-word adjectives
> - collapse 2 spaces to one space in the middle of sentences
> - use
The host controller device might be designed to work for the particular
products or applications. In that case its DT node is supposed to be
equipped with the tpl-support property.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Changelog v2:
- Grammar fix: "s/it'/its"
- Discard '|'
The controller driver supports two types of DWC USB3 devices: with a
common interrupt lane and with individual interrupts for each mode. Add
support for both these cases to the DWC USB3 DT schema.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Changelog v2:
- Grammar fix: "s/both of
Oh, I see you'd changed it inline :) Thanks
On Sat, Dec 05, 2020 at 11:40:00AM -0600, Serge E. Hallyn wrote:
> How odd - where did that come from?
>
> James, I force-pushed that with corrected bugzilla link to
> 2020-11-29/fix-nscaps. Sorry about that.
>
> On Fri, Dec 04, 2020 at 07:58:14AM
On Sat, Dec 5, 2020 at 12:27 AM Bjorn Andersson
wrote:
> On Fri 04 Dec 10:50 CST 2020, Arnd Bergmann wrote:
>
> Your patch looks correct to me, so:
> Reviewed-by: Bjorn Andersson
>
>
> But we're going to have to sprinkle a handful of these throughout the
> tree and we're not a lot of people who
The DWC USB3 driver and some DTS files like Exynos 5250, Keystone k2e, etc
expects the DWC USB3 DT node to have the compatible string with the
"synopsys" vendor prefix. Let's add the corresponding compatible string to
the controller DT schema, but mark it as deprecated seeing the Synopsys,
Inc. is
In accordance with the driver comments the PIPE3 de-emphasis can be tuned
to be either -6dB, -2.5dB or disabled. Let's add the de-emphasis
property constraints so the DT schema would make sure the controller DT
node is equipped with correct value.
Signed-off-by: Serge Semin
Reviewed-by: Rob
Originally the procedure of the ULPI transaction finish detection has been
developed as a simple busy-loop with just decrementing counter and no
delays. It's wrong since on different systems the loop will take a
different time to complete. So if the system bus and CPU are fast enough
to overtake
First of all the commit e0082698b689 ("usb: dwc3: ulpi: conditionally
resume ULPI PHY") introduced the Suspend USB2.0 HS/FS/LS PHY regression,
as by design of the fix any attempt to read/write from/to the PHY control
registers will completely disable the PHY suspension, which consequently
will
On 04/12/20 21:19, Qian Cai wrote:
> On Tue, 2020-11-17 at 19:28 +, Valentin Schneider wrote:
>> We did have some breakage in that area, but all the holes I was aware of
>> have been plugged. What would help here is to see which tasks are still
>> queued on that outgoing CPU, and their
Thanks for the review Vinod.
On 12/5/20 1:45 AM, Vinod Koul wrote:
On 03-12-20, 04:46, Bard Liao wrote:
From: Pierre-Louis Bossart
When a Slave device is resumed, it may resume the bus and restart the
enumeration. During that process, we absolutely don't want to call
regular read/write
Hello Zhang
On Fri, Dec 04, 2020 at 04:42:37PM +0800, Zhang Changzhong wrote:
> Fix to return a negative error code from the error handling
> case instead of 0, as done elsewhere in this function.
>
> Fixes: abf00907538e ("spi: dw: Add Baikal-T1 SPI Controller glue driver")
> Reported-by: Hulk
In accordance with [1] the DWC_usb3 core sets the GUSB2PHYACCn.VStsDone
bit when the PHY vendor control access is done and clears it when the
application initiates a new transaction. The doc doesn't say anything
about the GUSB2PHYACCn.VStsBsy flag serving for the same purpose. Moreover
we've
Our Baikal-T1 SoC is equipped with DWC USB3 IP core as a USB2.0 bus
controller. In general the DWC USB3 driver is working well for it except
the ULPI-bus part. We've found out that the DWC USB3 ULPI-bus driver detected
PHY with VID:PID tuple as 0x:0x, which of course wasn't true since
it
For some reason the "brcm,xhci-brcm-v2" compatible string has been missing
in the original bindings file. Add it to the Generic xHCI Controllers DT
schema since the controller driver expects it to be supported.
Signed-off-by: Serge Semin
Acked-by: Florian Fainelli
Reviewed-by: Rob Herring
---
In accordance with the USB HCD/DRD schema all the USB controllers are
supposed to have DT-nodes named with prefix "^usb(@.*)?". Since the
existing DT-nodes will be renamed in a subsequent patch let's first make
sure the DWC3 Qualcomm driver supports them and second falls back to the
deprecated
Intel Keem Bay DWC3 compatible DT nodes are supposed to have a DWC USB3
compatible sub-node to describe a fully functioning USB interface. Let's
use the available DWC USB3 DT schema to validate the Qualcomm DWC3
sub-nodes.
Note since the generic DWC USB3 DT node is supposed to be named as generic
In accordance with the IP core databook the
snps,quirk-frame-length-adjustment property can be set within [0, 0x3F].
Let's make sure the DT schema applies a correct constraints on the
property.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Even though the Generic PHY framework is the more preferable way of
setting the USB PHY up, there are still many dts-files and DT bindings
which rely on having the legacy "usb-phy" specified to attach particular
USB PHYs to USB cores. Let's have the "usb-phy" property described in
the generic USB
In accordance with the DWC USB3 bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
named despite of the warning
Amlogic G12A USB DT sub-nodes are supposed to be compatible with the
generic DWC USB2 and USB3 devices. Since now we've got DT schemas for
both of the later IP cores let's make sure that the Amlogic G12A USB
DT nodes are fully evaluated including the DWC sub-nodes.
Signed-off-by: Serge Semin
In accordance with the DWC USB3 bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
named.
Signed-off-by: Serge
Hello Uwe,
On Sat, Dec 05, 2020 at 12:28:34AM +0100, Uwe Kleine-König wrote:
> Hello Sean,
>
> On Fri, Dec 04, 2020 at 11:38:46AM +, Sean Young wrote:
> > On Fri, Dec 04, 2020 at 12:13:26PM +0100, Uwe Kleine-König wrote:
> > > On Fri, Dec 04, 2020 at 08:44:17AM +, Sean Young wrote:
> > >
On Tue, Dec 1, 2020 at 2:21 PM Stefan Agner wrote:
>
> According to the datasheet (Rev. 1.9) the RTL8211F requires at least
> 72ms "for internal circuits settling time" before accessing the PHY
> egisters. This fixes an issue seen on ODROID-C2 where the Ethernet
> link doesn't come up when using
In accordance with the DWC USB3 bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
named.
Signed-off-by: Serge
As the subject states this series is an attempt to harmonize the xHCI,
EHCI, OHCI and DWC USB3 DT nodes with the DT schema introduced in the
framework of the patchset [1].
Firstly as Krzysztof suggested we've deprecated a support of DWC USB3
controllers with "synopsys,"-vendor prefix compatible
Converrt NR_FILE_THPS account to pages.
Signed-off-by: Muchun Song
---
drivers/base/node.c | 3 +--
fs/proc/meminfo.c | 2 +-
mm/filemap.c| 2 +-
mm/huge_memory.c| 3 ++-
mm/khugepaged.c | 2 +-
mm/memcontrol.c | 5 ++---
6 files changed, 8 insertions(+), 9 deletions(-)
On Thu, 3 Dec 2020 22:20:16 -0800
Randy Dunlap wrote:
> Do basic editing & correction to amd-sfh-hid.rst:
> - fix punctuation
> - use HID instead of hid consistently
> - fix grammar, verb tense
>
> Signed-off-by: Randy Dunlap
> Cc: Jiri Kosina
> Cc: Jonathan Cameron
> Cc: Srinivas
Hi Mani,
On Sat, Dec 05, 2020 at 11:41:15AM +0530, Manivannan Sadhasivam wrote:
> Hi Cristi,
>
> On Fri, Nov 20, 2020 at 01:55:54AM +0200, Cristian Ciocaltea wrote:
> > Hi,
> >
> > This patchset brings a series of improvements for the Actions Semi S500
> > SoCs family, by adding support for
Currently the DT bindings of Generic xHCI Controllers are described by
means of the legacy text file. Since such format is deprecated in favor of
the DT schema, let's convert the Generic xHCI Controllers bindings file to
the corresponding yaml files. There will be two of them: a DT schema for
the
Don't try to adjust XFRM support flags if the bond device isn't yet
registered. Bad things can currently happen when netdev_change_features()
is called without having wanted_features fully filled in yet. This code
runs both on post-module-load mode changes, as well as at module init
time, and when
Qualcomm msm8996/sc7180/sdm845 DWC3 compatible DT nodes are supposed to
have a DWC USB3 compatible sub-node to describe a fully functioning USB
interface. Let's use the available DWC USB3 DT schema to validate the
Qualcomm DWC3 sub-nodes.
Note since the generic DWC USB3 DT node is supposed to be
An empty snps,quirk-frame-length-adjustment won't cause any change
performed by the driver. Moreover the DT schema validation will fail,
since it expects the property being assigned with some value. So set
fix the example by setting a valid FL-adj value in accordance with
Neil Armstrong comment.
To make the number of supported channels configurable, this patch
introduces uint max_num_channels_supported as module parameter.
Also macro MAX_NUM_CHANNELS_SUPPORTED_DEFAULT is introduced with
value 256, which is the currently used macro value.
MAX_NUM_CHANNELS_SUPPORTED was found and replaced
The default number of vmbus channels (macro
MAX_NUM_CHANNELS_SUPPORTED_DEFAULT) is made configurable through the new
Kconfig option HYPERV_VMBUS_DEFAULT_CHANNELS.
Signed-off-by: Stefan Eschenbacher
Co-developed-by: Max Stolze
Signed-off-by: Max Stolze
---
drivers/hv/Kconfig| 13
Fixes a misleading typo in the comment for the macro MAX_NUM_CHANNELS,
where two digits have been twisted.
Signed-off-by: Stefan Eschenbacher
Co-developed-by: Max Stolze
Signed-off-by: Max Stolze
---
drivers/hv/hyperv_vmbus.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
On Thu, 3 Dec 2020 22:20:17 -0800
Randy Dunlap wrote:
> Do basic editing & correction to hiddev.rst:
> - use HID instead of hid consistently
One case inline, where I think the usage of hid-core
might have been deliberate.
> - add hyphenation of multi-word adjectives
> - drop a duplicate word
Convert NR_SHMEM_THPS account to pages
Signed-off-by: Muchun Song
---
drivers/base/node.c | 3 +--
fs/proc/meminfo.c | 2 +-
mm/filemap.c| 2 +-
mm/huge_memory.c| 3 ++-
mm/khugepaged.c | 2 +-
mm/memcontrol.c | 26 ++
mm/page_alloc.c | 2
On Tue, Dec 1, 2020 at 2:21 PM Stefan Agner wrote:
>
> According to the datasheet (Rev. 1.9) the RTL8211F requires at least
> 72ms "for internal circuits settling time" before accessing the PHY
> egisters. On similar boards with the same PHY this fixes an issue where
> Ethernet link would not
From: Sven Van Asbroeck
Port counts in microchip dsa drivers can be quite confusing:
on the ksz8795, ksz_chip_data->port_cnt excludes the cpu port,
yet on the ksz9477, it includes the cpu port.
Add comments to document this situation explicitly.
Fixes: 912aae27c6af ("net: dsa: microchip:
On Tue, Dec 1, 2020 at 2:21 PM Stefan Agner wrote:
>
> According to the datasheet (Rev. 1.9) the RTL8211F requires at least
> 72ms "for internal circuits settling time" before accessing the PHY
> egisters. On similar boards with the same PHY this fixes an issue where
> Ethernet link would not
On Sat, Dec 5, 2020 at 10:09 PM Greg KH wrote:
>
> On Sat, Dec 05, 2020 at 09:02:20PM +0800, Muchun Song wrote:
> > Converrt NR_FILE_THPS account to pages.
> >
> > Signed-off-by: Muchun Song
> > ---
> > drivers/base/node.c | 3 +--
> > fs/proc/meminfo.c | 2 +-
> > mm/filemap.c| 2 +-
From: Stefan Eschenbacher
>
> According to the TODO comment in hyperv_vmbus.h the value in macro
> MAX_NUM_CHANNELS_SUPPORTED should be configurable. The first patch
> accomplishes that by introducting uint max_num_channels_supported as
> module parameter.
> Also macro
Four small fixes in two drivers. The mpt3sas fixes are all timeout
under unusual conditions problems and the storvsc is a missed incoming
packet validation and a missed error return.
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes
The short
From: Sven Van Asbroeck
On the ksz8795, if the devicetree contains a cpu node,
devicetree parsing fails and the whole driver errors out.
Fix the devicetree parsing code by making it use the
correct number of ports.
Fixes: 912aae27c6af ("net: dsa: microchip: really look for phy-mode in port
Fixed a coding style issue
Signed-off-by: Clement Smith
---
drivers/tty/serial/jsm/jsm_tty.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c
index 45e212be64c4..75c9bfa5077c 100644
---
On Sat, Dec 5, 2020 at 3:10 AM Rasmus Villemoes
wrote:
>
> On 03/12/2020 19.46, Yury Norov wrote:
>
> > I would prefer to avoid changing the find*bit() semantics. As for now,
> > if any of find_*_bit()
> > finds nothing, it returns the size of the bitmap it was passed.
>
> Yeah, we should
Convert NR_FILE_PMDMAPPED account to pages
Signed-off-by: Muchun Song
---
drivers/base/node.c | 3 +--
fs/proc/meminfo.c | 2 +-
mm/rmap.c | 6 --
3 files changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/base/node.c b/drivers/base/node.c
index
On Wed, Nov 25, 2020 at 3:40 AM Christian Hewitt
wrote:
>
> From: Artem Lapkin
>
> The max frequency for the w25q32 (VIM v1.2) and w25q128 (VIM v1.4) spifc
> chip should be 104Mhz not 30MHz.
>
> Fixes: b8b74dda3908 ("ARM64: dts: meson-gxm: Add support for Khadas VIM2")
> Signed-off-by: Artem
Although the ratio of the slab is one, we also should read the ratio
from the related memory_stats instead of hard-coding. And the local
variable of size is already the value of slab_unreclaimable. So we
do not need to read again.
Signed-off-by: Muchun Song
---
mm/memcontrol.c | 112
Fixed a coding style issue
Signed-off-by: Clement Smith
---
drivers/tty/serial/jsm/jsm_tty.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c
index 689774c073ca..512b77195e9f 100644
---
On Mon, Nov 30, 2020 at 7:04 AM Dongjin Kim wrote:
>
> The freqency 151200 should be 15.
there's a typo in "frequency". I hope that Kevin can fix this up while
applying the patch
>
> Signed-off-by: Dongjin Kim
apart from the typo above:
Reviewed-by: Martin Blumenstingl
(while
201 - 300 of 447 matches
Mail list logo