From: Márton Németh nm...@freemail.hu
Add support for snapshot button found on Labtec Webcam 2200.
Signed-off-by: Márton Németh nm...@freemail.hu
---
Hi,
this is the first trial to add support for the snapshot button. This
code is working only before the streaming is started. When the streaming
In the kernel you have (2.6.31) two drivers may try to handle your
webcam: gspca_sonixj and sn9c102. If both are generated, the active
driver changes at each webcam unplug/replug (you may know which driver
is active looking at the last lines of 'dmesg').
If the driver gspca_sonixj does not
On Tuesday 10 November 2009 20:21:37 Pete Eberlein wrote:
From: Pete Eberlein p...@sensoray.com
The s2250-board i2c module was converted to use v4l2-i2c-drv.h in
preparation for its subdev conversion. This change prevented the
s2250-loader from being initialized within the same module due
Hi Peter,
Thanks for this patch series! It's looking much better now.
I did find one thing though in this patch:
On Tuesday 10 November 2009 20:21:27 Pete Eberlein wrote:
From: Pete Eberlein p...@sensoray.com
This adds a struct v4l2_device to the go7007 device struct and registers
it
Hi,
Am Sonntag, den 15.11.2009, 14:42 +0200 schrieb rul...@meta.ua:
How to do that?:
You are forced to use saa7134-alsa dma sound
a problem is that I can't tell for sure which analog TV standard you
currently use in the Ukraine, either it is still SECAM DK or you changed
to some PAL
Mauro,
Please pull from http://linuxtv.org/hg/~awalls/cx18-yuv2
for the following 9 changesets:
01/09: cx18: Rename struct cx18_mdl to struct cx18_mdl_ent
http://linuxtv.org/hg/~awalls/cx18-yuv2?cmd=changeset;node=0c3fc323e620
02/09: cx18: Rename struct cx18_queue.buffers to struct
Hi,
Am Sonntag, den 15.11.2009, 14:42 +0200 schrieb rul...@meta.ua:
How to do that?:
You are forced to use saa7134-alsa dma sound
a problem is that I can't tell for sure which analog TV standard you
currently use in the Ukraine, either it is still SECAM DK or you changed
to some PAL
Hi Guennadi,
Apologies for the late reply, but better late than never :-)
On Thursday 12 November 2009 09:08:42 Guennadi Liakhovetski wrote:
Hi Hans
Thanks for the review
On Wed, 11 Nov 2009, Hans Verkuil wrote:
Hi Guennadi,
OK, I've looked at this again. See my comments below.
Am Sonntag, den 15.11.2009, 17:15 +0200 schrieb rul...@meta.ua:
Hi,
Am Sonntag, den 15.11.2009, 14:42 +0200 schrieb rul...@meta.ua:
How to do that?:
You are forced to use saa7134-alsa dma sound
a problem is that I can't tell for sure which analog TV standard you
currently use
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Sun Nov 15 19:00:03 CET 2009
path:http://www.linuxtv.org/hg/v4l-dvb
changeset: 1:e341e9e85af2
gcc version: gcc
Manu Abraham wrote:
Thanks for the feedback.
I've been looking into the issue you mentioned as well, but still
haven't reached
the destination yet.
Has anyone tested if the S2-1600 has the same problems?
Jonas
--
To unsubscribe from this list: send the line unsubscribe linux-media in
Hi all,
Can anyone give any clue as to why I might get this error
when capturing from a PAC207 webcam? It happens after a 6-7
second delay when capturing.
I've seen this with 2.6.30.1, 2.6.30.5 and 2.6.32-rc7, however
I can run the same camera on another (much faster) system using
the same
Dear Guennadi
Thank you
Oh, indeed. Ok, but can you add proper support for both high and low
polarities?
I think your order will be added in next patch.
Add polarities support
I will send it
OK ?
By the way.
Maybe I should ask you about it.
My question is that who select ACTIVE HI / LOW ?
hi all,
I've recently bought an Avermedia Twinstar usb device and I'm trying
to make it work on linux.
Unfortunately, my system doesn't recognize it (i'm running sabayon
linux with 2.6.31 kernel).
Taking a look inside it seems the card is based on a AF9035B-N2 chip,
maybe incompatible with the
There have been some improvements to gspca_main and gspca_pac207
recently, as well as pac207 specific improvements in libv4l2. Are you
using the latest v4l-dvb and libv4l2? I get some slowdown halfway when
using capture-example.c and it seems to improve when I use the latest
v4l-dvb and
Hello Mauro,
Please pull from
http://www.kernellabs.com/hg/~dheitmueller/misc-fixes-4 for the
following:
cxusb: Fix hang on DViCO FusionHDTV DVB-T Dual Digital 4 (rev 1)
Thanks,
Devin
--
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
--
To unsubscribe from this list: send the
From: Vaibhav Hiremath hvaib...@ti.com
Signed-off-by: Vaibhav Hiremath hvaib...@ti.com
Reviewed-by: Muralidharan Karicheri m-kariche...@ti.com
---
drivers/media/video/davinci/dm644x_ccdc.c | 17 +
drivers/media/video/davinci/dm644x_ccdc_regs.h |8
2 files
Hi,
Hans de Goede wrote:
Hi,
Thanks for working on this! I think it would be great if we could
get support for camera buttons in general into gspca.
I've not looked closely at your code yet, have you looked at
the camera button code in the gspca sn9c20x.c driver? Also I would really
As
18 matches
Mail list logo