On 8 August 2015 at 01:53, Greg KH wrote:
> On Fri, Aug 07, 2015 at 05:22:47PM +0800, Baolin Wang wrote:
>> On 7 August 2015 at 17:07, Peter Chen wrote:
>> >
>> >> >> /**
>> >> >> * struct usb_udc - describes one usb device controller @@ -127,12
>> >> >> +128,45 @@ void usb_gadget_giveback_req
On 8 August 2015 at 01:52, Greg KH wrote:
> On Fri, Aug 07, 2015 at 04:19:40PM +0800, Baolin Wang wrote:
>> On 7 August 2015 at 13:34, Peter Chen wrote:
>> > On Thu, Aug 06, 2015 at 03:03:47PM +0800, Baolin Wang wrote:
>> >> Currently the Linux kernel does not provide any standard integration of
Hello Greg,
On Sat, Aug 8, 2015 at 3:29 AM, Greg KH wrote:
> On Fri, Aug 07, 2015 at 06:03:36PM -0700, Duc Dang wrote:
>> Provide the methods to let ACPI identify the need to use
>> xhci-platform. Change the Kconfig files so the
>> xhci-plat.o file is selectable during kernel config.
>>
>> This h
Provide the methods to let ACPI identify the need to use
xhci-platform. Change the Kconfig files so the
xhci-plat.o file is selectable during kernel config.
This has been tested on an ARM64 machine with platform XHCI, an
x86_64 machine with XHCI, and an x86_64 machine without XHCI.
There were no r
The xhci platform driver needs to work on systems that
either only support 64-bit DMA or only support 32-bit DMA.
Attempt to set a coherent dma mask for 64-bit DMA, and
attempt again with 32-bit DMA if that fails.
[dhdang: Regenerate the patch over 4.2-rc5]
Signed-off-by: Mark Langsdorf
Tested-by
On Fri, Aug 7, 2015 at 6:29 PM, Greg KH wrote:
> On Fri, Aug 07, 2015 at 06:03:36PM -0700, Duc Dang wrote:
>> Provide the methods to let ACPI identify the need to use
>> xhci-platform. Change the Kconfig files so the
>> xhci-plat.o file is selectable during kernel config.
>>
>> This has been teste
On Fri, Aug 07, 2015 at 06:03:36PM -0700, Duc Dang wrote:
> Provide the methods to let ACPI identify the need to use
> xhci-platform. Change the Kconfig files so the
> xhci-plat.o file is selectable during kernel config.
>
> This has been tested on an ARM64 machine with platform XHCI, an
> x86_64
Provide the methods to let ACPI identify the need to use
xhci-platform. Change the Kconfig files so the
xhci-plat.o file is selectable during kernel config.
This has been tested on an ARM64 machine with platform XHCI, an
x86_64 machine with XHCI, and an x86_64 machine without XHCI.
There were no r
The xhci platform driver needs to work on systems that
either only support 64-bit DMA or only support 32-bit DMA.
Attempt to set a coherent dma mask for 64-bit DMA, and
attempt again with 32-bit DMA if that fails.
[dhdang: regenerate the patch over 4.2-rc5]
Signed-off-by: Mark Langsdorf
Tested-
Hi Greg,
On Wed, Jul 29, 2015 at 10:18 PM, Loc Ho wrote:
> Hi,
>
>>> >> The xhci platform driver needs to work on systems that either only
>>> >> support 64-bit DMA or only support 32-bit DMA. Attempt to set a
>>> >> coherent dma mask for 64-bit DMA, and attempt again with 32-bit
>>> >> DMA if th
The following changes since commit cbfe8fa6cd672011c755c3cd85c9ffd4e2d10a6f:
Linux 4.2-rc4 (2015-07-26 12:26:21 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git/ tags/usb-4.2-rc6
for you to fetch changes up to 0a1b6f63198f6e51d12c8d
On Thu, Aug 6, 2015 at 9:40 AM, Felipe Balbi wrote:
> Hi folks,
>
> if your patches aren't in my tree yet, it's too late, sorry.
>
> We have a total of 145 non-merge commits, here's dirstat:
>
> $ git diff --dirstat next ^cbfe8fa6cd67 | sort -rn
> 21.0% drivers/usb/gadget/udc/
> 19.9% drivers/
On Wed, 15 Jul 2015, Ramneek Mehresh wrote:
> Add workqueue to add/remove host driver (outside
> interrupt context) upon each id change.
>
> Signed-off-by: Li Yang
> Signed-off-by: Ramneek Mehresh
> ---
> drivers/usb/host/ehci-fsl.c | 83
> ++---
> driv
>From the usb 3.1 spec available at http://www.usb.org/developers/docs/
table 10-7 (Hub Class Requests) specifies the values for SetHubDepth and
GetPortErrorCount as:
Request bmRequestType bRequestwValue
wIndex wLength Data
SetHubDepth 00100
On Fri, Aug 07, 2015 at 09:48:19PM +0300, Tal Shorer wrote:
> On Fri, Aug 7, 2015 at 9:40 PM, Greg KH wrote:
> > On Fri, Aug 07, 2015 at 09:16:00PM +0300, Tal Shorer wrote:
> >> >From the usb 3.1 spec available at http://www.usb.org/developers/docs/
> >> table 10-7 (Hub Class Requests) specifies t
On Fri, Aug 7, 2015 at 9:40 PM, Greg KH wrote:
> On Fri, Aug 07, 2015 at 09:16:00PM +0300, Tal Shorer wrote:
>> >From the usb 3.1 spec available at http://www.usb.org/developers/docs/
>> table 10-7 (Hub Class Requests) specifies the values for SetHubDepth and
>> GetPortErrorCount as:
>>
>> Request
On Fri, Aug 07, 2015 at 09:16:00PM +0300, Tal Shorer wrote:
> >From the usb 3.1 spec available at http://www.usb.org/developers/docs/
> table 10-7 (Hub Class Requests) specifies the values for SetHubDepth and
> GetPortErrorCount as:
>
> Request bmRequestType bRequest wValue wIndex wLength Data
> S
Please ignore v2, I missed that you
On Fri, Aug 7, 2015 at 9:13 PM, Tal Shorer wrote:
> From the usb 3.1 spec available at http://www.usb.org/developers/docs/
> table 10-7 (Hub Class Requests) specifies the values for SetHubDepth and
> GetPortErrorCount as:
>
> Request bmRequestType bRequest wVal
>From the usb 3.1 spec available at http://www.usb.org/developers/docs/
table 10-7 (Hub Class Requests) specifies the values for SetHubDepth and
GetPortErrorCount as:
Request bmRequestType bRequest wValue wIndex wLength Data
SetHubDepth 0010B SET_HUB_DEPTH Hub Depth Zero Zero None
GetPortError
>From the usb 3.1 spec available at http://www.usb.org/developers/docs/
table 10-7 (Hub Class Requests) specifies the values for SetHubDepth and
GetPortErrorCount as:
Request bmRequestType bRequest wValue wIndex wLength Data
SetHubDepth 0010B SET_HUB_DEPTH Hub Depth Zero Zero None
GetPortError
On Fri, Aug 07, 2015 at 08:52:25PM +0300, Tal Shorer wrote:
> >From the usb 3.1 spec available at http://www.usb.org/developers/docs/
> table 10-7 (Hub Class Requests) specifies the values for SetHubDepth and
> GetPortErrorCount as:
>
> Request bmRequestType bRequest wValue wIndex wLength Data
> S
On Fri, Aug 07, 2015 at 08:52:25PM +0300, Tal Shorer wrote:
> >From the usb 3.1 spec available at http://www.usb.org/developers/docs/
> table 10-7 (Hub Class Requests) specifies the values for SetHubDepth and
> GetPortErrorCount as:
>
> Request bmRequestType bRequest wValue wIndex wLength Data
> S
On Fri, Aug 07, 2015 at 04:19:40PM +0800, Baolin Wang wrote:
> On 7 August 2015 at 13:34, Peter Chen wrote:
> > On Thu, Aug 06, 2015 at 03:03:47PM +0800, Baolin Wang wrote:
> >> Currently the Linux kernel does not provide any standard integration of
> >> this
> >> feature that integrates the USB
>From the usb 3.1 spec available at http://www.usb.org/developers/docs/
table 10-7 (Hub Class Requests) specifies the values for SetHubDepth and
GetPortErrorCount as:
Request bmRequestType bRequest wValue wIndex wLength Data
SetHubDepth 0010B SET_HUB_DEPTH Hub Depth Zero Zero None
GetPortError
On Fri, Aug 07, 2015 at 05:22:47PM +0800, Baolin Wang wrote:
> On 7 August 2015 at 17:07, Peter Chen wrote:
> >
> >> >> /**
> >> >> * struct usb_udc - describes one usb device controller @@ -127,12
> >> >> +128,45 @@ void usb_gadget_giveback_request(struct usb_ep *ep, }
> >> >> EXPORT_SYMBOL_G
On Fri, Aug 07, 2015 at 07:26:15PM +0900, arun k wrote:
> Hi,
>
> I am stuck with the above issue,
> I have some doubts regarding USB - Generic driver
> 1. Could you please explain me why USB - Generic driver is slow ?
Because it was designed that way, it is not for high-speed data
throughput at
On Fri, Aug 7, 2015 at 8:31 PM, Greg KH wrote:
> On Fri, Aug 07, 2015 at 07:56:37PM +0300, Tal Shorer wrote:
>> On Fri, Aug 7, 2015 at 7:37 PM, Greg KH wrote:
>> > On Fri, Aug 07, 2015 at 12:49:39PM +0300, Tal Shorer wrote:
>> >> In include/linux/usb/hcd.h, we have
>> >>
>> >> /* class requests f
On Fri, Aug 07, 2015 at 07:56:37PM +0300, Tal Shorer wrote:
> On Fri, Aug 7, 2015 at 7:37 PM, Greg KH wrote:
> > On Fri, Aug 07, 2015 at 12:49:39PM +0300, Tal Shorer wrote:
> >> In include/linux/usb/hcd.h, we have
> >>
> >> /* class requests from USB 3.0 hub spec, table 10-5 */
> >> #define SetHub
On Fri, Aug 7, 2015 at 7:37 PM, Greg KH wrote:
> On Fri, Aug 07, 2015 at 12:49:39PM +0300, Tal Shorer wrote:
>> In include/linux/usb/hcd.h, we have
>>
>> /* class requests from USB 3.0 hub spec, table 10-5 */
>> #define SetHubDepth (0x3000 | HUB_SET_DEPTH)
>> #define GetPortErrorCount (0x8000 | HU
On Fri, Aug 07, 2015 at 12:49:39PM +0300, Tal Shorer wrote:
> In include/linux/usb/hcd.h, we have
>
> /* class requests from USB 3.0 hub spec, table 10-5 */
> #define SetHubDepth (0x3000 | HUB_SET_DEPTH)
> #define GetPortErrorCount (0x8000 | HUB_GET_PORT_ERR_COUNT)
>
> However, from the usb 3.1 s
On 07.08.2015 15:40, linux-...@andraxin.se wrote:
> Hi there,
Hi
>
>
> Moving from 4.0.4 to 4.0.5, my USB 3.0 controller became practically useless
> (and this same issue persists [at least] upto and including 4.1.3).
> Here's an excerpt from my syslog demonstrating the problem:
>
...
>
> Loo
On Fri, Aug 07, 2015 at 02:13:34PM +0200, Robert Baldyga wrote:
> Add missing break after 'default' label to fix compilation error.
>
> Signed-off-by: Robert Baldyga
the funny thing is that this doesn't break with ARM build:
$ make ARCH=arm drivers/usb/musb/
CHK include/config/kernel.rele
On 08/06/2015 02:42 AM, arun k wrote:
> / # lsusb -v
> Bus 002 Device 006: ID 045b:0218
> Bus 001 Device 001: ID 1d6b:0002
> Bus 002 Device 001: ID 1d6b:0001
> Bus 003 Device 001: ID 1d6b:0002
> Bus 004 Device 001: ID 1d6b:0003
>
> In this my device is
> Bus 002 Device 006: ID 045b:0218
I have no
While building MUSB for Blackfin, a build error
can surface due to the empty default branch of
the switch statement.
In order to avoid the problem, just add a ; with
a comment.
Reported-by: Fengguang Wu
Signed-off-by: Felipe Balbi
---
drivers/usb/musb/musb_gadget.c | 1 +
1 file changed, 1 ins
Hi there,
Moving from 4.0.4 to 4.0.5, my USB 3.0 controller became practically useless
(and this same issue persists [at least] upto and including 4.1.3).
Here's an excerpt from my syslog demonstrating the problem:
-=-=-
Jun 24 23:15:22 eleven kernel: usb 2-4: new SuperSpeed USB device number 2
MTK xhci host controller defines some extra SW scheduling
parameters for HW to minimize the scheduling effort for
synchronous and interrupt endpoints. The parameters are
put into reseved DWs of slot context and endpoint context
Signed-off-by: Chunfeng Yun
---
drivers/usb/host/Kconfig|
>From 5c00619366ce4e7ff2bad050697dd6b3294f38ec Mon Sep 17 00:00:00 2001
From: Chunfeng Yun
Date: Fri, 7 Aug 2015 20:16:42 +0800
Subject: [PATCH v5 0/5] Mediatek xHCI support
The patch supports MediaTek's xHCI controller.
There are some differences from xHCI spec:
1. The interval is specified in
support usb3.0 phy of mt65xx SoCs
Signed-off-by: Chunfeng Yun
---
drivers/phy/Kconfig | 9 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-mt65xx-usb3.c | 467 ++
3 files changed, 477 insertions(+)
create mode 100644 drivers/phy/phy-m
add a DT binding documentation of xHCI host controller for the
MT8173 SoC from Mediatek.
Signed-off-by: Chunfeng Yun
---
.../devicetree/bindings/usb/mt8173-xhci.txt| 52 ++
1 file changed, 52 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/mt81
add a DT binding documentation of usb3.0 phy for MT65xx
SoCs from Mediatek.
Signed-off-by: Chunfeng Yun
---
.../devicetree/bindings/phy/phy-mt65xx-usb.txt | 69 ++
1 file changed, 69 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/phy-mt65xx-usb.tx
add xHCI and phy drivers for MT8173-EVB
Signed-off-by: Chunfeng Yun
---
arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 16 +++
arch/arm64/boot/dts/mediatek/mt8173.dtsi| 44 +
2 files changed, 60 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt817
Hi Felipe,
I see that you already fixed this in your tree. So only the second patch
is needed.
Thanks,
Robert
On 08/07/2015 02:13 PM, Robert Baldyga wrote:
> Add missing break after 'default' label to fix compilation error.
>
> Signed-off-by: Robert Baldyga
> ---
> drivers/usb/gadget/udc/goku
Add missing break after 'default' label to fix compilation error.
Signed-off-by: Robert Baldyga
---
drivers/usb/gadget/udc/goku_udc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/gadget/udc/goku_udc.c
b/drivers/usb/gadget/udc/goku_udc.c
index 2b628b3..dbb51a4 100644
--- a/dri
Add missing break after 'default' label to fix compilation error.
Signed-off-by: Robert Baldyga
---
drivers/usb/musb/musb_gadget.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 5f52bcb..31049d3 100644
--- a/drivers/usb/m
Fix two occurrences of the checkpatch.pl error:
ERROR: space prohibited before that ',' (ctx:WxW)
Fix one occurrence of the checkpatch error:
ERROR: space required before the open parenthesis '('
Signed-off-by: Kris Borer
---
drivers/usb/core/devio.c | 4 ++--
1 file changed, 2 insertions(+),
hi,
On Fri, 2015-07-31 at 14:45 +0100, Mark Rutland wrote:
> Hi,
>
> Sorry for my late reply to a prior version of this series, but I still
> have concerns with some of the properties.
>
> I'll repeat those below.
>
> On Fri, Jul 31, 2015 at 02:03:53PM +0100, Chunfeng Yun wrote:
> > add a DT bi
Hi,
I am stuck with the above issue,
I have some doubts regarding USB - Generic driver
1. Could you please explain me why USB - Generic driver is slow ?
2. Now I am try to study USB - Generic driver implementation , I am
confused with the function usb_serial_generic_read_bulk_callback() ,
could yo
In include/linux/usb/hcd.h, we have
/* class requests from USB 3.0 hub spec, table 10-5 */
#define SetHubDepth (0x3000 | HUB_SET_DEPTH)
#define GetPortErrorCount (0x8000 | HUB_GET_PORT_ERR_COUNT)
However, from the usb 3.1 spec I downloaded at
http://www.usb.org/developers/docs/,
table 10-5 appear
On 7 August 2015 at 17:07, Peter Chen wrote:
>
>> >> /**
>> >> * struct usb_udc - describes one usb device controller @@ -127,12
>> >> +128,45 @@ void usb_gadget_giveback_request(struct usb_ep *ep, }
>> >> EXPORT_SYMBOL_GPL(usb_gadget_giveback_request);
>> >>
>> >> +int usb_gadget_register_not
> >> /**
> >> * struct usb_udc - describes one usb device controller @@ -127,12
> >> +128,45 @@ void usb_gadget_giveback_request(struct usb_ep *ep, }
> >> EXPORT_SYMBOL_GPL(usb_gadget_giveback_request);
> >>
> >> +int usb_gadget_register_notify(struct usb_gadget *gadget,
> >> +
On 7 August 2015 at 16:31, Peter Chen wrote:
>
>>
>> Peter, Thanks for your reviewing and comments. Now I just introduce the
>> framework to review for more feedbacks and do not have a useful user to use
>> it. I just can show you some example code to show how to use it. Thanks.
>>
>
> Felipe may
On 7 August 2015 at 13:45, Peter Chen wrote:
> On Thu, Aug 06, 2015 at 03:03:49PM +0800, Baolin Wang wrote:
>> The usb charger framework is based on usb gadget, and each usb gadget
>> can be one usb charger to set the current limitation.
>>
>> This patch adds a notifier mechanism for usb charger t
Hey Hans,
On 06-08-15 16:35, Hans de Goede wrote:
Hi,
On 06-08-15 10:22, Olliver Schinagl wrote:
Hey Hans,
I've tried getting your musb stuff working on a cubietruck, but i
don't seem to see this patch on your linux-sunxi/sunxi-wip branch on
github? Is your github branch fully functional at
On 7 August 2015 at 13:41, Peter Chen wrote:
> On Thu, Aug 06, 2015 at 03:03:48PM +0800, Baolin Wang wrote:
>> This patch introduces the usb charger driver based on usb gadget that
>> makes an enhancement to a power driver. It works well in practice but
>> that requires a system with suitable hard
>
> Peter, Thanks for your reviewing and comments. Now I just introduce the
> framework to review for more feedbacks and do not have a useful user to use
> it. I just can show you some example code to show how to use it. Thanks.
>
Felipe may not accept the code which are no user on it, I remem
It is used to override the default setting for burst size, changing
burst size takes effect only when the SBUSCFG.AHBBRST = 0.
Signed-off-by: Peter Chen
---
Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt | 10 ++
1 file changed, 10 insertions(+)
diff --git a/Documentation/device
The users can change it through dts or platform data if they
want to change the default value.
Signed-off-by: Peter Chen
---
drivers/usb/chipidea/bits.h | 3 +++
drivers/usb/chipidea/core.c | 14 ++
include/linux/usb/chipidea.h | 2 ++
3 files changed, 19 insertions(+)
diff --gi
The system bus and chipidea IP have different limitations for
both host and device mode.
For example, with below errata, we need to enable SDIS(Stream Disable
Mode) at host mode. But we don't want it for device mode at the
same system.
TAR 9000378958
Title: Non-Double Word Aligned Buffer Address S
On 05/08/15 17:18, Kishon Vijay Abraham I wrote:
> Hi Roger,
>
> On Wednesday 05 August 2015 01:55 PM, Roger Quadros wrote:
>> On 05/08/15 11:23, Roger Quadros wrote:
>>>
>>> On 04/08/15 18:20, Kishon Vijay Abraham I wrote:
The USB2 PHY2 has a different register map compared to USB2 PHY1
It can improve the USB performance when choosing larger
burst size at some systems (bus size is larger), there is
no side effect if this burst size is larger than bus size.
Signed-off-by: Peter Chen
---
arch/arm/boot/dts/imx6qdl.dtsi | 8
arch/arm/boot/dts/imx6sl.dtsi | 6 ++
arch/
The user can adjust it through dts or platform data
Signed-off-by: Peter Chen
---
drivers/usb/chipidea/bits.h | 4
drivers/usb/chipidea/ci.h| 1 +
drivers/usb/chipidea/core.c | 35 +++
include/linux/usb/chipidea.h | 4
4 files changed, 44 insert
Stream mode enable is known for better performance, this stream mode
enable patch has been passed with stress tests at device mode for
imx6sl and imx6sx, and no issue is found.
Signed-off-by: Peter Chen
---
drivers/usb/chipidea/ci_hdrc_imx.c | 16 ++--
1 file changed, 10 insertions(+
With this setting and AHBBRST at SBUSCFG as "Incremental burst of
unspecified length", each non-burst size can be taken as single
transfer. It is benefit for non-burst size transfer.
Signed-off-by: Peter Chen
---
drivers/usb/chipidea/usbmisc_imx.c | 12 ++--
1 file changed, 10 insertions
The zero-length packet is the sendor tells the receiver that there
is no more data, so it is only needed at the TX side.
Signed-off-by: Peter Chen
---
drivers/usb/chipidea/udc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/
It is used to change ahb burst configuration for platforms, it is
vendor specific.
Signed-off-by: Peter Chen
---
Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt | 7 +++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
b/Documentati
Hi all,
In this series, I add several new interfaces for chipidea driver,
they are mainly for system configuration adjustment. The USB
performance may be improved with these configuration changing,
but each vendor driver owner needs to consult with your IC
owner which configuration parameters are
After setting ahb burst configuration as 0, we can increase tx/rx
burst size, it will improve the USB performance
Signed-off-by: Peter Chen
---
arch/arm/boot/dts/imx6qdl.dtsi | 4
arch/arm/boot/dts/imx6sl.dtsi | 3 +++
arch/arm/boot/dts/imx6sx.dtsi | 3 +++
3 files changed, 10 insertions(
On 7 August 2015 at 13:34, Peter Chen wrote:
> On Thu, Aug 06, 2015 at 03:03:47PM +0800, Baolin Wang wrote:
>> Currently the Linux kernel does not provide any standard integration of this
>> feature that integrates the USB subsystem with the system power regulation
>> provided by PMICs meaning tha
68 matches
Mail list logo
